Doepfer

??
i replied to a posting from today, sent at 11:09.
now i'm a bit confused, but well, this is quite a
"normal" state for me hehehe

best wishes

ingo



--- In Doepfer_a100@yahoogroups.com, "esa kotala" <esakotala@h...> 
wrote:
> as said before, that's what i wrote yesterday, before being 
corrected
> good day
> 
> 
> >From: "selfoscillate" <synaptic_music@y...>
> >Reply-To: Doepfer_a100@yahoogroups.com
> >To: Doepfer_a100@yahoogroups.com
> >Subject: [Doepfer_a100] Re: BBDs as CV-recorders for theremin or 
> >ribboncontroller
> >Date: Mon, 06 Jun 2005 11:34:16 -0000
> >
> >
> >as said before, this is not possible with a bbd-device.
> >
> >best wishes
> >
> >ingo
> >
> >
> >
> >
> >--- In Doepfer_a100@yahoogroups.com, "esa kotala" <esakotala@h...>
> >wrote:
> > > hello!
> > >
> > > >A single bucket bridge is a sample and hold stage with a bad 
hold
> >value.
> > > >Also there is a signal to noise ratio, which is to my opinion 
not
> > > >bearable for CVs for VCOs. You could modulate the VCO with 
white
> >noise
> > > >too...
> > >
> > > pitches and tones? no, no
> > >
> > > here's what i thought yesterday
> > >
> > > ///
> > >
> > > inputs:
> > >
> > > * record gate
> > > * record cv/audio
> > > * play gate
> > > * frequency/rate cv1
> > >
> > > knobs:
> > >
> > > * frequency/rate
> > > * cv1 amount
> > > (* maybe output amplifier gain, depending on electrical 
properties
> >and
> > > design)
> > >
> > > outputs:
> > >
> > > * audio/cv
> > >
> > > ///
> > >
> > > notes:
> > >
> > > * slew limiter is used to smooth the output: time inversely
> >proportional to
> > > the frequency/rate
> > > * when recording (= a record gate is received and there are 
bucket
> >bridges
> > > left to record to) the input is simply passed to the output
> > >
> > > ///
> > >
> > > simple patch:
> > >
> > > 1 connect a-176 manual cv-source to the bbd-recorder's audio/cv-
> >input
> > > 2 connect the output of the bbd-recorder to a filter's cv-input
> > > 3 send a gate simultaneously to sequencer start and record gate
> >input of the
> > > bbd-recorder
> > > 4 tweak the filter's cutoff point with a-176 while the sequence
> >lasts
> > > 5 now move the cable from the record gate to the play gate
> > > 6 when you play the sequence again, you will hear the recorded
> >filter cutoff
> > > sequence
> > >
> > > ///
> > >
> > > you can freely use my idea, just send me a free copy of the
> >prototype then
> > > hehehehehe
> > >
> > > esa
> > >
> > > 
_________________________________________________________________
> > > Nopea ja hauska tapa lähettää viestejä reaaliaikaisesti - MSN
> >Messenger.
> > > http://messenger.msn.fi
> >
> >
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> 
> _________________________________________________________________
> 3 vrk:n sääennuste http://www.msn.fi/uutiset/saa/