Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Florian Anwander
> Gesendet: Donnerstag, 16. Juni 2005 09:45
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: [Doepfer_a100] MS-404 CV/Gate outputs
>
>
> Hi Steve
>
> > The question is, will the the 404 be able to provide a stable
> CV for up to 3
> > modules (2 VCO & 1 VCF) without getting overloaded?
> To my experience: yes.
>
> Florian

I'd recommend the usage of an A-185 bus access module as the MS-404 has a
serial 1k protection resistor and inductor (because of EMC compliance / CE
sign) in it's CV output. By loading the output with 3 module (~ 100k each or
~33k altogether) there might occur a small voltage loss in the CV signal.
The A-185 has a high impedance input and includes a voltage buffer for CV
and consequently will avoid a voltage loss.

P.S. The MS-404 service manual is available on our web site (->  MANUALS ->
user's guides of older devices -> MS-404 user's guide -> MS-404 service
manual).

Best wishes
Dieter Doepfer