Doepfer

The matrix idea (built into the synthi range) attracted me - I used 
to have a VCS3 - But with the present big modular I've built up, I'd 
need a matrix panel with around 17,000 sockets !
This would occupy a surface area at least as large as my synthesiser 
front panel, over 48 inches square !
It would also cost a packet to build.


--- In Doepfer_a100@yahoogroups.com, don hassler <dlh30039@y...> 
wrote:
> Neat thread. Nearly always I find myself
> reverting/using a fixed configuration, though rarely
> in the vco/vcf/vca manner. The Synthi presto patch
> concept would be a great addition to Doepfer family.
> 
> 
> --- levka0 <levka@d...> wrote:
> 
> > Hi,
> > Well, I had some thoughts on this before, since a
> > lot of the
> > connections I make (VCF-VCA-EG) are pretty
> > "standard" in my set-up
> > I have not noticed any jacks wearing out, but I find
> > the clutter of
> > patch cords a little too much now & then, as a basic
> > patch will often
> > take up 5 cords already
> > There was once a poll for a kind of all-in-one
> > module for one synth
> > voice, not unlike an OB SEM, but it did not raise a
> > lot of enthousiasm
> > in the group.
> > I would still be in favour of such a module,
> > something like the A-109
> > with an EG and maybe a VCO+sub added to it.
> > Alternatively, I am also considering hard-wiring
> > some connections
> > behind the panels, but my soldering skills are not
> > very great.
> > I also have an Cwejman S1 pre-patched semi-modular
> > here whcih I use in
> > conjunction with the A-100 and this proves to work
> > really nicely. With
> > only 3-4 patch cords needed for conneting a few
> > A-100 modules, its
> > sound can be altered completely. It's the best of
> > both worlds (modular
> > and prepatched), but not an inexpensive solution.
> > 
> > regards
> > Joost
> > 
> > --- In Doepfer_a100@yahoogroups.com, Keld Sørensen
> > <keldsorensen@m...>
> > wrote:
> > > Inspired by a thread on the synthesizers.com group
> > - have any of you 
> > > permanent or semi permanent patches set up? - Does
> > having a patch cord 
> > > connected to an input/output weaken the jack? 
> > > I have cv connected to my VCO all the time and
> > Gate to the EG´s.
> > > No problem - but what about you?
> > > 
> > > Keld
> > 
> > 
> > 
> > 
> 
> 
> 
> 		
> __________________________________ 
> Yahoo! Mail Mobile 
> Take Yahoo! Mail with you! Check email on your mobile phone. 
> http://mobile.yahoo.com/learn/mail