Doepfer

No. But on the A-100 DIY page you find a description how to obtain CV or
Gate from the bus for other modules.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Zoran Bosnjak
> Gesendet: Mittwoch, 28. September 2005 14:56
> An: Doepfer_a100@yahoogroups.com
> Betreff: RE: [Doepfer_a100] Re: A-185
>
>
>
> Hello,
>
> this is a question I always wanted to ask about bus module functionality:
> beside A-110, A-111, and A-140, are there any other modules that
> can use it
> (get the signal from the bus)?
>
> Regards,
>
> Zoran
>
> >From: "selfoscillate" <synaptic_music@yahoo.com>
> >Reply-To: Doepfer_a100@yahoogroups.com
> >To: Doepfer_a100@yahoogroups.com
> >Subject: [Doepfer_a100] Re: A-185
> >Date: Tue, 27 Sep 2005 14:41:42 -0000
> >
> >
> >hello bryan,
> >
> >from my experience you need the a185 only when sending a
> >pitch cv to multiple origins, lets say you send a quantized
> >voltage to three vco's and a filter. as long as you use a
> >buffered multiple like the a185 you will be fine, but when
> >using an unbuffered multiple like a180 the cv voltage will
> >drop at a certain point and maybe your vco's will be out
> >of tune then.
> >the a185 feeds the system buss of the a100, so if you want
> >to use the system buss, you need the a185.
> >
> >to shortly answer your question, you do not necessarily need
> >an a185, but sometimes it makes life a lot easier
> >if you have one.
> >
> >hope this helps
> >
> >best wishes
> >
> >ingo
> >
> >
> >
> >
> >--- In Doepfer_a100@yahoogroups.com, "Bryan E Cornell" <bcor@l...>
> >wrote:
> > > I was looking around on the Doepfer site and I noticed the a185 Bus
> >Access module.  I'm not clear on what it does.  If I send my Doepfer
> >lfo to a bunch of different sources, will the signal somehow
> >degrade?  I have a Doepfer suitcase system and I'm always sending the
> >cv's to a multiple and then off to other places in the Doepfer system
> >and to my other racks of Blacet/Wiard modules.  I haven't noticed
> >that this is a problem, but I'm not always very scientific about
> >analyzing my patches.
> > >
> > > As my modular grows will I need the a185?
> > >
> > > Thanks for any advice.
> > >
> > >  Bryan
> >
> >
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>