Doepfer

hello dieter,
ingo's idea of putting two different stages BBD's into
each module is great.
as i always say, the more capabilities, sockets and
knobs in a module, the better.
best regards,
bakis.





--- Dieter Doepfer <hardware@doepfer.de> wrote:

> The first Karplus/Strong examples have been added to
> the preliminary page of
> the BBD module (www.doepfer.de/A100_BBD.htm).
> I'm still waiting for the answer of the BBD
> manufacturer if even 1024 stage
> BBD's are available. If it is available we may put
> both BBDs on the module
> (2 outputs available that can be used to mix
> together with the original
> signal and two different feedback pathes, both with
> positive/negative
> control). Thank's Ingo for this idea - even if the
> module will become a bit
> more expensive (~ Euro 150 instead of ~ 100, only a
> rough estimate !).
> 
> Best wishes
> Dieter Doepfer
> 
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag
> von Florian Anwander
> > Gesendet: Montag, 17. Oktober 2005 16:26
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: Re: AW: [Doepfer_a100] Re: BBD module
> first mp3 sound clips!!!
> >
> >
> > Hi
> >
> > Dieter Doepfer wrote:
> > > So the HCVSO goes up to 200kHz, resulting in
> 100kHz BBD clock and
> > > consequently 10.24ms delay time.
> > ok, so we should do a little survey here:  To my
> opinion 10ms as minimum
> > delay I would say, there is no real "flanging"
> effect possible. Flanging
> > is a modulation of center delaytimes between 1ms
> and 8-10 ms. Everything
> > with delaytimes larger than 10ms I would call
> "chorus". Still a nice
> > effect, but it will lack those 'narrow' and
> 'claustrophobic' aspect of a
> > good flanger or very short delays.
> >
> > > suggestion and put a so-so 1V/Oct HSVCO into the
> BBD module but offer an
> > > external clock input (normalled to the internal
> HSVCO) that
> > enables to drive
> > > the unit from an external precision HSVCO (I
> hope we will be
> > able to design
> > > a better - but even more expensive - HSVCO in
> the near future).
> > This sounds very reasonable.
> >
> > > My comment to Karplus/Strong and similar:
> > > For these applications I'd prefer the announced
> universal
> > AD/processor/DA
> > > module.
> > I agree with this tooo.
> >
> > > At the moment we prefer
> > > the adjustment of the memory length with up/down
> buttons (e.g.
> > > 2/4/8/16/32/64/128 ..... 1M) and a 3-digit LED
> display (the
> > decimal points
> > > could indicate "kilo" and "mega").
> > Giving devils advocat: What about a
> CV-controllable division factor?
> >
> >
> > > b.t.w. The SC filter prototype working as well.
> To speak the
> > truth: it's not
> > > very exciting from my point of view. Just a
> chaste, clean
> > filter having not
> > > very much character to my estimation. Maybe I
> use to often the A-106-1,
> > > A-107 and A-124 ...
> > Thats what the SC-Filter sounds like. It is only
> really interesting
> > because of the steep cutoff slope (and also
> because it can simply
> > connected to any kind of sampling rate). How steep
> will the slope of the
> > SC-Filter-module be?
> >
> > Florian
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> 
> 
> 
> ------------------------ Yahoo! Groups Sponsor
> --------------------~--> 
> Get fast access to your favorite Yahoo! Groups. Make
> Yahoo! your home page
>
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/QnLolB/TM
>
--------------------------------------------------------------------~->
> 
> 
>  
> Yahoo! Groups Links
> 
> 
>     Doepfer_a100-unsubscribe@yahoogroups.com
> 
>  
> 
> 
> 
> 
> 


Bakis Sirros
Parallel Worlds
Athens-Greece
[Doepfer_a100] group owner
http://www.shimarecords.co.uk
http://www.rubber.gr


	
		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com