Doepfer

Thanks for the reply Dieter but the Technics only goes down to 1, so 
it's the same as the A-100.

--- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer" 
<hardware@d...> wrote:
>
> I'm not shure if I already have pointed out that different 
counting methods
> may cause the troubles: some manufacturers count from zero, others 
from 1
> (e.g. 0...15/1...16 for midi channels, or 0...127/1...128 for 
program change
> numbers). In the A-190 manual the count starts from 1. So you may 
have to
> subtract 1 from the statements in the A-190 manual if your program 
change
> transmitter counts from 0.
> 
> Best wishes
> Dieter Doepfer
> 
> 
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Jonathan 
Heslop
> > Gesendet: Sonntag, 23. Oktober 2005 18:58
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: [Doepfer_a100] Changing Retrigger in A-190
> >
> >
> > I still cant seem to do this. I have tried sending Program 
Change 6
> > from Cubasis and my Technics WSA1 but it's not working. Are these
> > settings on my WSA right?
> >
> > MIDI CH - 1-1
> > PROG CHANGE - 6
> > BANK MSB - ---
> > BANK LSB - OFF
> > BANK SEL - OFF
> >
> > Do I need to have Config - CV1 selected in the A-190?
> >
> > Also, If you had to select two modules from the basic midi A-100 
to
> > remove so you could add a Waveshaper and External In, which 
would you
> > pick?
> >
> > Thanks for any help.
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>