Doepfer

I still cant seem to do this. I have tried sending Program Change 6 
from Cubasis and my Technics WSA1 but it's not working. Are these 
settings on my WSA right?

MIDI CH - 1-1
PROG CHANGE - 6
BANK MSB - ---
BANK LSB - OFF
BANK SEL - OFF

Do I need to have Config - CV1 selected in the A-190?

Also, If you had to select two modules from the basic midi A-100 to 
remove so you could add a Waveshaper and External In, which would you 
pick?

Thanks for any help.

i thought this was a Doepfer a100 group what are you talking about honathan?

Jonathan Heslop <jon@planetbliss.co.uk> wrote:I still cant seem to do this. I have tried sending Program Change 6 
from Cubasis and my Technics WSA1 but it's not working. Are these 
settings on my WSA right?

MIDI CH - 1-1
PROG CHANGE - 6
BANK MSB - ---
BANK LSB - OFF
BANK SEL - OFF

Do I need to have Config - CV1 selected in the A-190?

Also, If you had to select two modules from the basic midi A-100 to 
remove so you could add a Waveshaper and External In, which would you 
pick?

Thanks for any help.





SPONSORED LINKS 
A100 Modular system Synthesizer Electronic payment Electronic test equipment Guitar synthesizer 

---------------------------------
YAHOO! GROUPS LINKS 


    Visit your group "Doepfer_a100" on the web.
  
    To unsubscribe from this group, send an email to:
 Doepfer_a100-unsubscribe@yahoogroups.com
  
    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


---------------------------------




		
---------------------------------
 Yahoo! FareChase - Search multiple travel sites in one click.  

[Non-text portions of this message have been removed]

also has any one ever worked with other synthesizers and hooked em up to a a100? is their a way to hook up a buchla 100e to my a100?
Jonathan Heslop <jon@planetbliss.co.uk> wrote:I still cant seem to do this. I have tried sending Program Change 6 
from Cubasis and my Technics WSA1 but it's not working. Are these 
settings on my WSA right?

MIDI CH - 1-1
PROG CHANGE - 6
BANK MSB - ---
BANK LSB - OFF
BANK SEL - OFF

Do I need to have Config - CV1 selected in the A-190?

Also, If you had to select two modules from the basic midi A-100 to 
remove so you could add a Waveshaper and External In, which would you 
pick?

Thanks for any help.





SPONSORED LINKS 
A100 Modular system Synthesizer Electronic payment Electronic test equipment Guitar synthesizer 

---------------------------------
YAHOO! GROUPS LINKS 


    Visit your group "Doepfer_a100" on the web.
  
    To unsubscribe from this group, send an email to:
 Doepfer_a100-unsubscribe@yahoogroups.com
  
    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


---------------------------------




		
---------------------------------
 Yahoo! FareChase - Search multiple travel sites in one click.  

[Non-text portions of this message have been removed]

I'm not shure if I already have pointed out that different counting methods
may cause the troubles: some manufacturers count from zero, others from 1
(e.g. 0...15/1...16 for midi channels, or 0...127/1...128 for program change
numbers). In the A-190 manual the count starts from 1. So you may have to
subtract 1 from the statements in the A-190 manual if your program change
transmitter counts from 0.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Jonathan Heslop
> Gesendet: Sonntag, 23. Oktober 2005 18:58
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Changing Retrigger in A-190
>
>
> I still cant seem to do this. I have tried sending Program Change 6
> from Cubasis and my Technics WSA1 but it's not working. Are these
> settings on my WSA right?
>
> MIDI CH - 1-1
> PROG CHANGE - 6
> BANK MSB - ---
> BANK LSB - OFF
> BANK SEL - OFF
>
> Do I need to have Config - CV1 selected in the A-190?
>
> Also, If you had to select two modules from the basic midi A-100 to
> remove so you could add a Waveshaper and External In, which would you
> pick?
>
> Thanks for any help.
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Thanks for the reply Dieter but the Technics only goes down to 1, so 
it's the same as the A-100.

--- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer" 
<hardware@d...> wrote:
>
> I'm not shure if I already have pointed out that different 
counting methods
> may cause the troubles: some manufacturers count from zero, others 
from 1
> (e.g. 0...15/1...16 for midi channels, or 0...127/1...128 for 
program change
> numbers). In the A-190 manual the count starts from 1. So you may 
have to
> subtract 1 from the statements in the A-190 manual if your program 
change
> transmitter counts from 0.
> 
> Best wishes
> Dieter Doepfer
> 
> 
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Jonathan 
Heslop
> > Gesendet: Sonntag, 23. Oktober 2005 18:58
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: [Doepfer_a100] Changing Retrigger in A-190
> >
> >
> > I still cant seem to do this. I have tried sending Program 
Change 6
> > from Cubasis and my Technics WSA1 but it's not working. Are these
> > settings on my WSA right?
> >
> > MIDI CH - 1-1
> > PROG CHANGE - 6
> > BANK MSB - ---
> > BANK LSB - OFF
> > BANK SEL - OFF
> >
> > Do I need to have Config - CV1 selected in the A-190?
> >
> > Also, If you had to select two modules from the basic midi A-100 
to
> > remove so you could add a Waveshaper and External In, which 
would you

> > pick?
> >
> > Thanks for any help.
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>

If you cannot solve the problem I ask you to contact Matthias Marass
(keyboards@doepfer.de) or Christian Assall (software@doepfer.de). Matthias
is responsible for the production and final tests of the A-190, Christian is
the programmer of the A-190 firmware.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Jonathan Heslop
> Gesendet: Dienstag, 25. Oktober 2005 02:19
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Re: Changing Retrigger in A-190
>
>
> Thanks for the reply Dieter but the Technics only goes down to 1, so
> it's the same as the A-100.
>
> --- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer"
> <hardware@d...> wrote:
> >
> > I'm not shure if I already have pointed out that different
> counting methods
> > may cause the troubles: some manufacturers count from zero, others
> from 1
> > (e.g. 0...15/1...16 for midi channels, or 0...127/1...128 for
> program change
> > numbers). In the A-190 manual the count starts from 1. So you may
> have to
> > subtract 1 from the statements in the A-190 manual if your program
> change
> > transmitter counts from 0.
> >
> > Best wishes
> > Dieter Doepfer
> >
> >
> > > -----Ursprüngliche Nachricht-----
> > > Von: Doepfer_a100@yahoogroups.com
> > > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Jonathan
> Heslop
> > > Gesendet: Sonntag, 23. Oktober 2005 18:58
> > > An: Doepfer_a100@yahoogroups.com
> > > Betreff: [Doepfer_a100] Changing Retrigger in A-190
> > >
> > >
> > > I still cant seem to do this. I have tried sending Program
> Change 6
> > > from Cubasis and my Technics WSA1 but it's not working. Are these
> > > settings on my WSA right?
> > >
> > > MIDI CH - 1-1
> > > PROG CHANGE - 6
> > > BANK MSB - ---
> > > BANK LSB - OFF
> > > BANK SEL - OFF
> > >
> > > Do I need to have Config - CV1 selected in the A-190?
> > >
> > > Also, If you had to select two modules from the basic midi A-100
> to
> > > remove so you could add a Waveshaper and External In, which
> would you
> > > pick?
> > >
> > > Thanks for any help.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>