Doepfer

If you cannot solve the problem I ask you to contact Matthias Marass
(keyboards@doepfer.de) or Christian Assall (software@doepfer.de). Matthias
is responsible for the production and final tests of the A-190, Christian is
the programmer of the A-190 firmware.

Best wishes
Dieter Doepfer


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Jonathan Heslop
> Gesendet: Dienstag, 25. Oktober 2005 02:19
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Re: Changing Retrigger in A-190
>
>
> Thanks for the reply Dieter but the Technics only goes down to 1, so
> it's the same as the A-100.
>
> --- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer"
> <hardware@d...> wrote:
> >
> > I'm not shure if I already have pointed out that different
> counting methods
> > may cause the troubles: some manufacturers count from zero, others
> from 1
> > (e.g. 0...15/1...16 for midi channels, or 0...127/1...128 for
> program change
> > numbers). In the A-190 manual the count starts from 1. So you may
> have to
> > subtract 1 from the statements in the A-190 manual if your program
> change
> > transmitter counts from 0.
> >
> > Best wishes
> > Dieter Doepfer
> >
> >
> > > -----Ursprüngliche Nachricht-----
> > > Von: Doepfer_a100@yahoogroups.com
> > > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Jonathan
> Heslop
> > > Gesendet: Sonntag, 23. Oktober 2005 18:58
> > > An: Doepfer_a100@yahoogroups.com
> > > Betreff: [Doepfer_a100] Changing Retrigger in A-190
> > >
> > >
> > > I still cant seem to do this. I have tried sending Program
> Change 6
> > > from Cubasis and my Technics WSA1 but it's not working. Are these
> > > settings on my WSA right?
> > >
> > > MIDI CH - 1-1
> > > PROG CHANGE - 6
> > > BANK MSB - ---
> > > BANK LSB - OFF
> > > BANK SEL - OFF
> > >
> > > Do I need to have Config - CV1 selected in the A-190?
> > >
> > > Also, If you had to select two modules from the basic midi A-100
> to
> > > remove so you could add a Waveshaper and External In, which
> would you
> > > pick?
> > >
> > > Thanks for any help.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>