Doepfer

I'm not shure if I already have pointed out that different counting methods
may cause the troubles: some manufacturers count from zero, others from 1
(e.g. 0...15/1...16 for midi channels, or 0...127/1...128 for program change
numbers). In the A-190 manual the count starts from 1. So you may have to
subtract 1 from the statements in the A-190 manual if your program change
transmitter counts from 0.

Best wishes
Dieter Doepfer


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Jonathan Heslop
> Gesendet: Sonntag, 23. Oktober 2005 18:58
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Changing Retrigger in A-190
>
>
> I still cant seem to do this. I have tried sending Program Change 6
> from Cubasis and my Technics WSA1 but it's not working. Are these
> settings on my WSA right?
>
> MIDI CH - 1-1
> PROG CHANGE - 6
> BANK MSB - ---
> BANK LSB - OFF
> BANK SEL - OFF
>
> Do I need to have Config - CV1 selected in the A-190?
>
> Also, If you had to select two modules from the basic midi A-100 to
> remove so you could add a Waveshaper and External In, which would you
> pick?
>
> Thanks for any help.
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>