hello ernst, i'm not sure that this is what you want to know, but i tune my vco's using a multi-effects unit with a built-in tuner (sony hr-mp5). best wishes ingo --- In Doepfer_a100@yahoogroups.com, achtung_999 <heinrich.himmelwasser@g...> wrote: > > Thanks that sort of answers the question. > Although I still face the massive task of tuning the oscillators.. ;-( > Do any of you here have some good tips on how to do that? > Both my effort were a bit frustrating. > The description op the Doepfer site is a wee bit minimal to my taste. > What I'm looking for is where to start and what to watch. > > Thanks.. > > Ernst > > > On 10/30/05, Zoran Bosnjak <dj_allin@h...> wrote: > > Is this the answer? Please look below to see Mr. Doepfer's response to me > > some time ago. Regards, > > > > Zoran > > > > > > >-----Ursprüngliche Nachricht----- > > >Von: Zoran Bosnjak [mailto:zoranbosnjak@h...] > > >Gesendet: Dienstag, 7. September 2004 21:59 > > >An: hardware@d... > > >Cc: musicr@g... > > >Betreff: A-111 Oscillator Problem > > > > > > > > >Hello Mr. Doepfer, > > > > > >I have two A-111 oscillators. One of them has a problem with PW knob. And > > >here it is: from 0 to 5, PW knob behaves as expected - it changes pulse > > >width. But from 5.1 to 10, it changes a pitch of any waveform, not only > > >square! > > > > > >The other oscillator is perfectly fine, and I am using it to > > >compare it with > > >faulty one. > > > > > >I am exploring this problem in very musical way - my faulty oscillator is > > >capable of producing more wierd sounds than healthy one. > > > > > >So I really don't know what to do at this point. Please advise, > > > > > >Zoran Bosnjak > > > > Our A-111 specialist Matthias Marass is on holidays until end of next week. > > As far as I remember the problems you described are caused by the very > > sensitive hard sync input. Normally the hard sync input is connected to GND > > with the switching contact of the hard sync input if no plug is inserted. > > Maybe the switching contact does not work any longer and causes the > > problems. To find this out please try to put a signal into the hard sync > > input. If the problems disappear this is the reason and the socket has to be > > replaced (maybe the A-111 is still eqipped with the old version of the > > sockets used until about 2001). > > If you are able to replace the socket yourself we could send you a socket > > for free if you have purchased the A-111 from us directly. Otherwise please > > contact the representative where you purchased the module for a free socket. > > From your message I cannot see your home country. > > > > Otherwise the module has to be repaired in the factory. > > > > Best regards > > Dieter Doepfer > > Doepfer Musikelektronik GmbH > > Email address: hardware@d... > > Web Site: www.doepfer.com > > > > > > > > >From: Bakis Sirros <synth_freak_2000@y...> > > >Reply-To: Doepfer_a100@yahoogroups.com > > >To: Doepfer_a100@yahoogroups.com > > >Subject: Re: [Doepfer_a100] A111 troubles > > >Date: Sat, 29 Oct 2005 11:37:59 -0700 (PDT) > > > > > >hello ernst, > > >i think the solution to this is replace the hard sync > > >socket? (or spare a patchcable and leave it > > >connected...) > > >i do not know, exactly. just wait for dieter's reply. > > >i am sure he will explain why this happens. > > >what about the sawtooth wave? > > >bakis. > > > > > > > > > > > > > > >--- achtung_999 <heinrich.himmelwasser@g...> > > >wrote: > > > > > > > Hey Bakis, > > > > > > > > If I keep a patchcord inserted in the hardsync it > > > > indeed behaves normal. > > > > But as soon as I unplug it the "PW feature" is > > > > back... > > > > Hmm... > > > > Was I right about the sawtooth wave? > > > > > > > > Greetings, > > > > > > > > Ernst > > > > > > > > > > > > >Bakis Sirros > > >Parallel Worlds > > >Athens-Greece > > >[Doepfer_a100] group owner > > >http://www.shimarecords.co.uk > > >http://www.rubber.gr > > > > > > > > > > > >__________________________________ > > >Start your day with Yahoo! - Make it your home page! > > >http://www.yahoo.com/r/hs > > > > > > > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > >
Message
Re: A111 troubles
2005-11-01 by selfoscillate
Attachments
- No local attachments were found for this message.