Doepfer

Thanks a lot for any of your responses!
@Tim, even though I had an older threat in in mind I was puzzled 
about the module. You're right: reading the manual makes a 
difference. However, still the almost non existing effect on any VCO 
waveforms make me wonder wether this partic. module works as it 
fellow A136s or not.
Unfortunately I didn't gave it no try on CVs. Regards, Ingo
(@Ingo thanks for your offer, I'll get back on you later. I've hardly 
access to net at the moment.)

--- In Doepfer_a100@yahoogroups.com, "Tim Stinchcombe" <timothy@t...> 
wrote:
>
> Hi Ingo,
>      This question of the A-136 has come up several times in the 
past - 
> it is quite a tricky module to get to grips with, and matters 
aren't 
> helped by the manual not being as precise as it could be.
> 
> Check out posts #307 and #1172, but read them carefully! For my 
money 
> it is much easier to understand this module if you have an 
> oscilloscope, but Joe (author of #307) proved it was possible with 
a 
> simple meter, a good ear, and lots of patience!
> 
> Tim
> 
> --- In Doepfer_a100@yahoogroups.com, "ilanode" <techmeier@w...> 
wrote:
> >
> > Hello list, the A136 is on my mind for long time. Recently I had 
the 
> > chance to toy with it for a while and was wondering on the 
results:
> > 1) On *any* of the VCO's waveforms it had rather minor impact. 
> > 2)Dramtic and great results could be obtained by feeding a more 
> > complex signal (= Jomox drum machine) into the module. However, 
some 
> > settings boost the bass which I didn't expect.
> > 3) There was no neutral setting. Eg feeding white noise into the 
> > module while all pots set to 0 lead to an obvious loss of high 
freq.
> > 4) I expected the -L pot being an attentuator for external CV on -
A 
> > (some for L and A) but they seem to be independent from one 
another.
> > I've to admit that I have no experience with Distortion devices 
(let 
> > alone Waveshaper) so probably my expectations were mislead. 
Anyhow, I 
> > wonder wether all A136 behave as decribed: almost no effect even 
on a 
> > square wave; possible bass boost; lack of neutral setting; no 
> > connection btn. -L/-A and L/A? And, your application for the A136?
> > TIA, Ingo
> >
>