Doepfer

Ingo,
 
Agreed I'll take 4, way useful module.
 
David
 
David Salter
Senior Project Manager
Reuters Ltd
Tel       +44 20 7542 2402
Mob     +44 7990562402
email    david.salter@reuters.com
RM       david.salter.reuters@reuters.net
 
 

________________________________

From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of selfoscillate
Sent: 19 December 2005 13:43
To: Doepfer_a100@yahoogroups.com
Subject: [Doepfer_a100] Re: high precision adder?



hello dieter,

with the right amount of jacks this module would close a real gap
in the a100 module range. what i always wanted is a buffered
version of an a180 and a precision adder could be used that
way too, if it had enough jacks.

how about three inputs, four buffered outputs and one
inverted output? could be done on a 4 te faceplate.
if you manufacture a module with similar specs, then
i'll buy a minimum of six modules for my system right away.

best wishes

ingo




--- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer" <hardware@d...> 
wrote:
>
> An precision adder is from the technical point of view no problem 
(nothing
> but the CV mixer on the DIY page but without attenuators and 
precision 0.1%
> resistors and high quality OpAmps). If there are sufficient 
inquiries we
> could develop such a module. How about a poll ?
> 
> Best wishes
> Dieter Doepfer
> 
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von okiikahuna
> > Gesendet: Samstag, 17. Dezember 2005 23:16
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: [Doepfer_a100] Re: high precision adder?
> >
> >
> > Ingo,
> >
> > I think that this is an absolute necessity. It could also serve 
as a
> > buffer, since the CV output of some modules, like the midi to CV
> > module, drops if fed into too many oscilators and filters and 
such.
> >
> > There are not a lot of good alternatives out there: Analogue
> > Solutions makes an 8hp CV mixer that is completely unusable for 
this
> > purpose because it is WAY too imprecise. (don't bother trying it, 
I
> > already have)  The Analogue Systems Buffer is much more precise, 
but
> > you can't mix more than one voltage.   The Doepfer Buss Access 
mixes
> > and buffer, but still not enough inputs.  So, there is a real need
> > for this.
> >
> > It could be made as a 4hp module, since all you would need are
> > inputs and outputs. (don't need precision if you are gonna screw 
it
> > up with pots anyway) An inverting output might be nice.
> >
> > K
> >
> >
> > --- In Doepfer_a100@yahoogroups.com, "selfoscillate"
> > <synaptic_music@y...> wrote:
> > >
> > >
> > > hello list,
> > >
> > > what would you guys think about a high precision adder/mixer?
> > > such a module is very useful for adding pitch voltages
> > > for vco's. standard mixers are just not precise enough
> > > and so they often screw a 1v/oct quantized voltage.
> > >
> > > best wishes
> > >
> > > ingo
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>







________________________________

YAHOO! GROUPS LINKS 


	
*	 Visit your group "Doepfer_a100 <http://groups.yahoo.com/group/Doepfer_a100> " on the web.
	  
*	 To unsubscribe from this group, send an email to:
	 Doepfer_a100-unsubscribe@yahoogroups.com <mailto:Doepfer_a100-unsubscribe@yahoogroups.com?subject=Unsubscribe> 
	  
*	 Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . 


________________________________




To find out more about Reuters visit www.about.reuters.com

Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Reuters Ltd.



[Non-text portions of this message have been removed]