Doepfer

> >
> > According to the reply from Mr. Doepfer, you are using wrong fuse.  If 
your 
> > power supply is 0.650 A (the old one), you should not use fuse with 
higher 
> > value than 0.400 mA. Regards,
> 
> Thanks Zoran,
> 
> Apparently I am continuing to aid my own troubles.
> Of course Radioshack looked at the original fuse and handed me these.
> Now if only I could trace back the steps and find out what started the 
trouble.
>  
> if anyone knows a part number please chime in.
> TD 
> 
> 

TD

I'm not sure what size the fuse package is (I haven't looked yet) but 
assuming it is the standard 1 1/4" x 1/4", the Radio Shack catalogue number 
for 500mA @ 250v Slow-blow fuses is 270-1018 otherwise if it's the slightly 
smaller 5mm x 20mm size it is 270-1061.

This document explains the various fuse markings with respect to USA:
http://www.schurterinc.com/pdf/usa/c_fuses_p204.pdf
The actual meaning of the markings can be found on page 202 of the general 
document here:
http://www.schurterinc.com/pdf/e_d/c_general_info_fuses.pdf

Hope this helps.
Adam-V.