Yahoo Groups archive
Messages
Page 138 of 564 · 28179 messages matched
2010-08-20 by Joachim
Hi, I, too, cannot wait for the Trigger sequencer. I really it will come. Cheers Joachim Bakis Sirros schrieb: > hi list, > > last week, i was at Ingo's studio, in Germany, and finally tested the A187-1 VC-DSP, so i can verify that it is a really nice module for adding these digi
2010-08-20 by Bakis Sirros
hi list, last week, i was at Ingo's studio, in Germany, and finally tested the A187-1 VC-DSP, so i can verify that it is a really nice module for adding these digital effects in your analogue sounds. we used it in our tracks, of course. also, i tested the mini-Schaltwerk a100 mod
2010-08-20 by yahoo@doepfer.de
> Hi, > > I'm going to start on this DIY synth shortly when the rest of the > parts have arrived. I have a question about the voltages to some > of the pots and where the voltages are taken from. I realise the > kit is intended for experianced electronics people but after > havin
2010-08-20 by modularplanner
Thanks Dieter, I understand things a lot better now. -Andy
2010-08-19 by sean_process
Hi All The following Doepfer modules are for sale: a131 VCA, original CEM version £35 40 a171 VC Slew £35 40 a178 Theremin Controller £42 50 All three modules £100 or 120 All in good condition - the usual minor rack rash only. Payment via Paypal or bank transfer. Shipping wit
2010-08-19 by modularplanner
Hi, I'm going to start on this DIY synth shortly when the rest of the parts have arrived. I have a question about the voltages to some of the pots and where the voltages are taken from. I realise the kit is intended for experianced electronics people but after having made a few x
2010-08-19 by Bakis Sirros
hi list, want to buy one of the following: Korg SQ10 sequencer Roland system 104 sequencer ARP sequencer Korg VC10 vocoder (may also be interested in Roland SVC350 vocoder, if i do not find one of the above...) can pay up to 900 euros for each one, plus shipping and paypal fees.
2010-08-17 by denonbld
Based in the UK, ship to anywhere in europe. rev 1.5, great condition. Offers please.
2010-08-15 by Rudy
--- In Doepfer_a100@yahoogroups.com, "gruiere" wrote: > > is thee any chance of a commpresor / limiter module coming up!??? >Until Doepfer come up with a real compressor check out the VC-FCS of Cwejman It is a bit pricy although very efficient. I just love the side chain
2010-08-15 by Göran Sandström
I think vc thresh, ratio, attack, decay and knee should just about cover it. I think it's important to have variable soft knee, sidechain input and envelope output. I would be very interested in such a module. -veqtor
2010-08-15 by Florian Anwander
Hello gruiere wrote: > is thee any chance of a commpresor / limiter module coming up!??? Yes I often thought about, whether such a module would be good. Should it be volage controlled and - if yes - which parameters should be voltage controlled? Especially, since one can achieve
2010-08-15 by gruiere
is thee any chance of a commpresor / limiter module coming up!???
2010-08-13 by jeph
A188 is now sold and the A101-2 price is lowered. A101-2 Vactrol LPG/LP Filter/VCA (Note that this one comes with black Rean(?) soft touch knobs) $90 Looking to sell in US, buyer pays $5 shipping. Trades I am looking for! Borg 2 ASOL SH-NZ FOH Sound of Shadows Doepfer A138M I hav
2010-08-13 by Ancient Eyeball Recipe
yeah. Saw that....almost got you there, but not quite. ----- Original Message ----- From: "jamesulibarri" To: "Doepfer a100" Sent: Friday, August 13, 2010 12:09:15 PM Subject: [Doepfer_a100] Re: schwalterk offlist looks like I missed it by a couple days --- In Doepfer_a100@yahoog
2010-08-13 by ysinollaysi
VCS sold. Thanks.
2010-08-13 by jamesulibarri
looks like I missed it by a couple days --- In Doepfer_a100@yahoogroups.com, Ancient Eyeball Recipe wrote: > > there was a fellow selling one (as of a few days ago) on www.muffwiggler.com . If you're not a member, you need to register, but it's pretty painless. > ----- Original M
2010-08-13 by ysinollaysi
VCS is still available. I'll make it 200 euros. Really a verstile module, can do LFO, VCO, EG, wave folding, trigger etc. --- In Doepfer_a100@yahoogroups.com, "ysinollaysi" wrote: > > FS: Bananalogue euro VCS > Older faceplate. > > 205 euros. > > EU only. > Registered shipping wi
2010-08-13 by Phil
For Sale: MFB SEQ-01 (execellent condition, almost brand new, only a few weeks old) - 115 GBP Make Noise Pressure Points (excellent condition, 6 months old) - 135 GBP Prefereably UK but will do EU too. Registered shipping with tracking inside the UK: 6 GBP Payment via PayPal: add
2010-08-12 by wisekodama
A188-1 2048 BBD - Nice range for lots of crazy combs, chorus, flange, scrapes, & short delays! $115 Samples of the A188 2048: http://www.doepfer.net/A100_sounds/BBD_Manual_2.mp3 http://www.doepfer.net/A100_sounds/BBD_Flange_LFO_2.mp3 http://www.muffwiggler.com/forum/download.php?
2010-08-11 by robert piotrowicz
hello group I want to buy Pocked Dial in good shape anybody want to sell? thanks best r
2010-08-11 by daad_noise
MINT (minus usual screw rash) Plan B M15 Complex VCO rev 2.4 - $230 shipped in North America, shipping elsewhere actual shipping. This baby works flawlessly. contact: alexpears at gmail dot com Let me know, Alex
2010-08-11 by Ancient Eyeball Recipe
there was a fellow selling one (as of a few days ago) on www.muffwiggler.com . If you're not a member, you need to register, but it's pretty painless. ----- Original Message ----- From: "jamesulibarri" To: "Doepfer a100" Sent: Wednesday, August 11, 2010 8:09:07 AM Subject: [Doepf
2010-08-11 by yahoo@doepfer.de
> As two 6u racks next to each other. That would be an instant buy! There are no plans to add other types of A-100 cases for the near future. We have already more than 10 different cases available (A-100G6, A-100P6, A-100P9, A-100LC6, A-100LC9, A-100PMS6, A-100PMS9, A-100PMS12, A
2010-08-11 by heslop.jonathan
As two 6u racks next to each other. That would be an instant buy!
2010-08-11 by jamesulibarri
Email me if you are selling one, thanks.
2010-08-10 by andre goncalves
Hello, I’m selling some doepfer modules at ±30% off A110 – 100€ A111 – 190€ A119 – 45€ A144 – 45€ A149-1 - 70€ A179 – 45€ A190 – 115€ A192 – 80€ Please contact me if you’re interested All the very best andre [Non-text portions of this message have been removed]
2010-08-09 by Florian Anwander
Hi Sidney > Hello everybody. What is the most usual way of processing an external signal, such as a guitar or drum machine, using the A-100 filters. Do I need a special module with an external audio input? My answer is a little late - I was travelling for three weeks. There are t
2010-08-09 by yahoo@doepfer.de
> Will the new version of this have clock out? If so then I think > this is definitely THE module I am waiting on right now. Any news > about when it might be released? > > Thanks, > > Rory There are no plans for the A-190-3 to offer a clock out. But we plan another (low-cost) mo
2010-08-09 by gui
For Sale MAQ 16/3 in perfect shape. 525 plus shipping from Spain. I have the original package, with cable and manual. I´m open to trades for: Make Noise Maths Synthesis Technology E350 Morphing Terrarium Doepfer A-154 Sequencer Controller Intellijel MindMeld (i have a vulcan, bu
2010-08-06 by dennis henderson
www.myspace.com/noirethemusic handelsflottan o has some organ-y poly doepfer. about 6 harmonies --- On Fri, 8/6/10, propane23 wrote: From: propane23 Subject: [Doepfer_a100] Any polyphonic a100 examples? To: Doepfer_a100@yahoogroups.com Date: Friday, August 6, 2010, 1:18 PM I'm ju
2010-08-06 by propane23
I'm just debating the pros and cons of exapanding my doepfer kit into a polyphonic versus other gear ideas. Have done the usual duophony tricks and have multitracked before, but i wondered if people had audio examples of true polyphony? Have searched youtube and don't see anythin
2010-08-06 by dr_synthatron
Will the new version of this have clock out? If so then I think this is definitely THE module I am waiting on right now. Any news about when it might be released? Thanks, Rory http://www.myspace.com/emergencylibrarianmusic
2010-08-06 by ysinollaysi
FS: Bananalogue euro VCS Older faceplate. 205 euros. EU only. Registered shipping with tracking inside the EU: 12 euros I prefer bank transfer inside the euro-zone. Payment via PayPal: add 2% I could consider trading this to some Doepfer Quads in a very good condition: A-143-2 Qu
2010-08-06 by Richard Francis
Hi, Just wanted to say thanks a lot for the replies ... easiest and cheapest solution was a small and lightweight step-up transformer from Chinatown. Cheers Richard Richard Francis'486 New North Road, Kingsland'027 445 2723 music'www.richardfrancis.net.nz design'www.rfstudio.co.n
2010-08-03 by yahoo@doepfer.de
> hello group, > > I have just filled my first 9U rack (and very very happy with > it!!) but my > latest addition is giving me some problems. When i received the > A-155 together > with my A-154 expander I noticed the toggle switch that selects > the range (1v / > 2v / 4v) was a
2010-08-02 by Rene Verdult
hello group, I have just filled my first 9U rack (and very very happy with it!!) but my latest addition is giving me some problems. When i received the A-155 together with my A-154 expander I noticed the toggle switch that selects the range (1v / 2v / 4v) was a little 'wonky' lik
2010-08-02 by Guy
Hi Rene, I have no idea if these are the proper switches indeed, but I can tell you the Miyama switches (and most likely the other one too) are not exactly prime examples of decent quality. Good switches are expensive. Try C&K, NKK, or Mountain. _g --- In Doepfer_a100@yahoogroups
2010-08-02 by yahoo@doepfer.de
> A-183-2 A-183-1? > > The A-183-1 looks useful. I'm thinking of ditching my A-130 / 131 > VCA's for 1 A-132-1 Dual VCA. Am I right in thinking the A-183-1 > gives the A-132-1 level/gain control? Yes, but it does not have the offset feature of A-130/131. For this the A-183-2 woul
2010-08-02 by yahoo@doepfer.de
> And the A-186, A-182 You are right. These modules were missing in my list. Best wishes Dieter Doepfer
2010-08-02 by RICHARD HORSMAN
And the A-186, A-182 ________________________________ From: "yahoo@doepfer.de" To: Doepfer_a100@yahoogroups.com Sent: Monday, 2 August, 2010 14:49:05 Subject: AW: [Doepfer_a100] Passive Modules > Does anyone know off the top of their heads which Doepfer (plus > other euro rack) m
2010-08-02 by yahoo@doepfer.de
> Does anyone know off the top of their heads which Doepfer (plus > other euro rack) modules are passive? A-180, A-181, A-183-1 Best wishes Dieter Doepfer
2010-08-02 by heslop.jonathan
A-183-2 A-183-1? The A-183-1 looks useful. I'm thinking of ditching my A-130 / 131 VCA's for 1 A-132-1 Dual VCA. Am I right in thinking the A-183-1 gives the A-132-1 level/gain control? Thanks, Jonathan --- In Doepfer_a100@yahoogroups.com, RICHARD HORSMAN wrote: > > And the A-186
2010-08-02 by heslop.jonathan
Thanks Dieter :) --- In Doepfer_a100@yahoogroups.com, wrote: > > > Does anyone know off the top of their heads which Doepfer (plus > > other euro rack) modules are passive? > > A-180, A-181, A-183-1 > > Best wishes > Dieter Doepfer >
2010-08-02 by heslop.jonathan
Does anyone know off the top of their heads which Doepfer (plus other euro rack) modules are passive? I'm trying to sort out an upgrade for my basic 6u a-100 system to the "low cost" 9u. I'm currently planning to add passive modules to a mini case with no power to save space in t
2010-08-01 by Bakis Sirros
hello, a very easy test: just patch a sinewave to the a137-1 audio input (the audio level input knob does not need to be more than the 9 - 10 'o clock position) and turn any of its 4 knobs (symmetry, harmonics, folding level, multiples.) you should hear change in the sound. if no
2010-08-01 by doof_per
Hi guys..Wow its been a fantastic weekend getting a good crack at my new introduction to the modular world -ITS FANTASTIC!!! Thanks a bunch to everybody who helped out as I am now one happy knob tweaking guy :) One problem though, is I cant for the life of me figure out the a137-
2010-07-29 by Bakis Sirros
in a few words: the Red stripe of the ribbon cable indicates -12volts supply and goes to the bottom of the doepfer Busboard (which of course reads '-12volts'). the module end of the ribbon cable is ALREADY connected to the module, when you buy new doepfer modules. simple as that.
2010-07-29 by yahoo@doepfer.de
Please look at the introduction of the A-100 user's manual: www.doepfer.com > MANUALS > A-100 > Technical details (A100_intro_e.pdf) Especially pages 4-6 Best wishes Dieter Doepfer > Hi guys, long time! > > My day has finally arrived where my unit that you all helped me > put tog
2010-07-29 by Elby Designs
If Doepfer are told it is to be a system when they get the order then for a small fee, they will put it all together and test it out. They also fill in any unused space with blank panels to make sure the unit meets minimum electrical safety requirements. If they did not tell you,
2010-07-29 by yahoo@doepfer.de
> i tried this for months & asked for help on here. i couldnt find > anything. please post if you figure it out. Please contact our A-190-1 specialist Matthias Marass (keyboards(at)doepfer(dot)de). He is responsible for the A-190-1 in our company. Best wishes Dieter Doepfer