Doepfer

Hi All,
It took me some time to find my own way into this module, 
but now I might need to cancel all my appointments for the coming
months in order to study all its possibilities.

I am currently really charmed by putting an A-112 + A-101-2 in the FB
loop of the A-188-1 and feeding the A-188-1 output into an A-108.
This way, really strange delay effects can be produced.

By using an EG to control the VCF that filters the A-188-1 clock, it
is possible make the A-188-1 quite silent without losing relevant
hi-freq. 

I think that both the upcoming switched cap. VCF and the VC clocked
delay will nicely combine with the A-188-1.

Thanks again to Dieter for bringing us such exciting modules.

What is this refering to?

> I think that both the upcoming switched cap. VCF and the VC clocked
> delay will nicely combine with the A-188-1.

these are some forthcoming modules and have been discussed
for quite some time now. afaik these modules are currently
under development, but it's too early to make an outline
of the features of the final products.

best wishes

ingo



--- In Doepfer_a100@yahoogroups.com, "djsoysos" <djsoysos@...> wrote:
>
> What is this refering to?
> 
> > I think that both the upcoming switched cap. VCF and the VC 
clocked
> > delay will nicely combine with the A-188-1.
>

Hello, do you know if the Basic Frame of Doepfer to work with my Cwejman 
modular system ??
Thanks


>From: "djsoysos" <djsoysos@yahoo.com>
>Reply-To: Doepfer_a100@yahoogroups.com
>To: Doepfer_a100@yahoogroups.com
>Subject: [Doepfer_a100] Re: A-188-1 4096 impressions (it's indeed 
>impressive !)
>Date: Tue, 08 Aug 2006 03:29:19 -0000
>
>What is this refering to?
>
> > I think that both the upcoming switched cap. VCF and the VC clocked
> > delay will nicely combine with the A-188-1.
>
>
>
>
>
>

_________________________________________________________________
Un amor, una aventura, compañía para un viaje. Regístrate gratis en MSN Amor 
& Amistad. http://match.msn.es/match/mt.cfm?pg=channel&tcid=162349

i don't know exactly, but i guess that it is no problem.
you should send your question to wowa cwejman, if you
want to be sure about that. the email-address can be found
on his website http://www.cwejman.net/

best wishes

ingo


--- In Doepfer_a100@yahoogroups.com, "Jordi Sampe Farre" 
<gd_records@...> wrote:
>
> Hello, do you know if the Basic Frame of Doepfer to work with my 
Cwejman 
> modular system ??
> Thanks
> 
> 
> >From: "djsoysos" <djsoysos@...>
> >Reply-To: Doepfer_a100@yahoogroups.com
> >To: Doepfer_a100@yahoogroups.com
> >Subject: [Doepfer_a100] Re: A-188-1 4096 impressions (it's indeed 
> >impressive !)
> >Date: Tue, 08 Aug 2006 03:29:19 -0000
> >
> >What is this refering to?
> >
> > > I think that both the upcoming switched cap. VCF and the VC 
clocked
> > > delay will nicely combine with the A-188-1.
> >
> >
> >
> >
> >
> >
> 
> _________________________________________________________________
> Un amor, una aventura, compañía para un viaje. Regístrate gratis en 
MSN Amor 
> & Amistad. http://match.msn.es/match/mt.cfm?pg=channel&tcid=162349
>

Yes, this all works fine

You should only take care that the red ribbon on the 
Cwejman power cable is NOT lined up with -12 V (as for Doepfer
modules), but to the +12 V pin

Best regards
Joost


--- In Doepfer_a100@yahoogroups.com, "Jordi Sampe Farre"
<gd_records@...> wrote:
>
> Hello, do you know if the Basic Frame of Doepfer to work with my
Cwejman 
> modular system ??
> Thanks
> 
> 
> >From: "djsoysos" <djsoysos@...>
> >Reply-To: Doepfer_a100@yahoogroups.com
> >To: Doepfer_a100@yahoogroups.com
> >Subject: [Doepfer_a100] Re: A-188-1 4096 impressions (it's indeed 
> >impressive !)
> >Date: Tue, 08 Aug 2006 03:29:19 -0000
> >
> >What is this refering to?
> >
> > > I think that both the upcoming switched cap. VCF and the VC clocked
> > > delay will nicely combine with the A-188-1.
> >
> >
> >
> >
> >
> >
> 
> _________________________________________________________________
> Un amor, una aventura, compañía para un viaje. Regístrate gratis en
MSN Amor 
> & Amistad. http://match.msn.es/match/mt.cfm?pg=channel&tcid=162349
>

Ok, thank you very much for your fast answer.
Best regards;

Jordi

_________________________________________________________________
¿Estás pensando en cambiar de coche? Todas los modelos de serie y extras en 
MSN Motor. http://motor.msn.es/researchcentre/

I must say, it beats me why other makers don't conform to Doepfer's standard
with respect to the red stripe.  Isn't it a somewhat arbitrary choice
anyway?  Doesn't Doepfer have more sold modules out there in the world than
most other makers put together?  Why gleefully jump aboard and then start
rocking the boat?

--Chuck (who absolutely loves his Cwejman S1 Mk2)

-----Original Message-----
From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On
Behalf Of levka0
Sent: Wednesday, August 09, 2006 3:04 PM
To: Doepfer_a100@yahoogroups.com
Subject: [Doepfer_a100] Cwejman in Doepfer frame

Yes, this all works fine

You should only take care that the red ribbon on the 
Cwejman power cable is NOT lined up with -12 V (as for Doepfer
modules), but to the +12 V pin

Best regards
Joost

Bought a used A112, I have small problem with the module.

it seems that when I gate the recording trigger for a signal and then  
play back the sample I get the sample playing back normal for as long  
as I have gated the recording but it seems to be playing back the  
whole memory (S1 or S2) and the remaining playback is just garbled  
sounds. I am not sure if this is the way the A112 works, it seems to  
be a 50/50 for me. This is quite irritating when looping a sample too  
as I get the garbled sound in the loop (of course...)

Can someone who uses the A112 much just guide me through a simple  
test of sampling a source, playing it back and so forth ? Does anyone  
recognize this error ? I have exchanged the battery in the module  
aswell and it changed the result a bit, from totally garbled sound to  
less garbled. .

Thanks

Daniel

Daniel,

that's normal and has nothing to do with the battery. In play mode always
the complete memory is played back. If you do not record the complete memory
then there will occur the rest of previous sample behind the position where
the recording has been stopped. To avoid this I'd recommend to clear the
complete memory before you record a new sample (i.e. record without a sound
or level control fully CCW) or to use the complete memory for a new sample.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von erase
> Gesendet: Montag, 14. August 2006 15:34
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] A112 problem, or not?
>
>
> Bought a used A112, I have small problem with the module.
>
> it seems that when I gate the recording trigger for a signal and then
> play back the sample I get the sample playing back normal for as long
> as I have gated the recording but it seems to be playing back the
> whole memory (S1 or S2) and the remaining playback is just garbled
> sounds. I am not sure if this is the way the A112 works, it seems to
> be a 50/50 for me. This is quite irritating when looping a sample too
> as I get the garbled sound in the loop (of course...)
>
> Can someone who uses the A112 much just guide me through a simple
> test of sampling a source, playing it back and so forth ? Does anyone
> recognize this error ? I have exchanged the battery in the module
> aswell and it changed the result a bit, from totally garbled sound to
> less garbled. .
>
> Thanks
>
> Daniel
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>