Doepfer

Hello there, I was wondering if anyone knew if it would be possible to 
adapt the PSU2 power supply to output +9v and -9v rather than + and -
12v, maybe this is possible by changing some components? Or does anyone 
know of a way of incorporating diy 9v modules into the Doepfer power 
setup? (possibly similiar to the +5v adaptor AD5 - I think simply +9v 
is necessary for me).

thanks
Charlie

Boss effect stomp boxes? 
>  
>   <Doepfer_a100@yahoogroups.com> wrote:   >  >   >  

> Hello there, I was wondering if anyone knew if it
> would be possible to
>  adapt the PSU2 power supply to output +9v and -9v
> rather than + and -
>  12v, maybe this is possible by changing some components?
> Or does anyone
>  know of a way of incorporating diy 9v modules into
> the Doepfer power
>  setup? (possibly similiar to the +5v adaptor AD5
> - I think simply +9v
>  is necessary for me).
>  
>  thanks
>  Charlie

 
     
  

[Non-text portions of this message have been removed]

What about just finding a 9v regulator, and cutting down the 12v supply that
way for the modules that need only 9v?
Thats all the doepfer 5v adapter does...
 
You would probably need to do it on a per-module basis thoug - the bus has a
rail reserved for 5v, but obviously not a couple for +/-9v.  If you only
needed +9v though, and you were not using the 5v rail, then i guess you
could use the reserved 5v system for 9v insted.
 
Julian
 


[Non-text portions of this message have been removed]

If you replace the 7805 by an 7809 on the A-100AD5 adapter you obtain +9V
(or 7808 for +8V). If you plug such a modified A-100AD5 to the A-100 bus
board you have +9/+8V available instead of +5V.

But pay attention not to connect modules that require +5V (e.g. A-190,
A-191, A-113) to a bus board with such a modified A-100AD5. The modules will
be destroyed !

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Julian
> Gesendet: Sonntag, 15. Oktober 2006 15:55
> An: Doepfer_a100@yahoogroups.com
> Betreff: RE: [Doepfer_a100] power supply adaptation
>
>
> What about just finding a 9v regulator, and cutting down the 12v
> supply that
> way for the modules that need only 9v?
> Thats all the doepfer 5v adapter does...
>
> You would probably need to do it on a per-module basis thoug -
> the bus has a
> rail reserved for 5v, but obviously not a couple for +/-9v.  If you only
> needed +9v though, and you were not using the 5v rail, then i guess you
> could use the reserved 5v system for 9v insted.
>
> Julian
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>

The first audio example of the tapped BBD module A-188-2 is now available.
It's a stereo mp3 to show the possibilities of the two audio outputs.

Best wishes
Dieter Doepfer

Thanks Dieter, I think this is what I'll do. So am I right in thinking that if a module does not need +5v then it would be okay to connect it to a modified bus board (ie.  there is no connection between the module and +9v) I assume that would be the case, so I guess you don't need to answer that! Also such a modified AD5 (an AD9 if you like) would be useful for the digital oscillator would it not? Is this how you would implement the 9v supply?

Thanks

Charlie

hardware@doepfer.de wrote: If you replace the 7805 by an 7809 on the A-100AD5 adapter you obtain +9V
(or 7808 for +8V). If you plug such a modified A-100AD5 to the A-100 bus
board you have +9/+8V available instead of +5V.

But pay attention not to connect modules that require +5V (e.g. A-190,
A-191, A-113) to a bus board with such a modified A-100AD5. The modules will
be destroyed !

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Julian
> Gesendet: Sonntag, 15. Oktober 2006 15:55
> An: Doepfer_a100@yahoogroups.com
> Betreff: RE: [Doepfer_a100] power supply adaptation
>
>
> What about just finding a 9v regulator, and cutting down the 12v
> supply that
> way for the modules that need only 9v?
> Thats all the doepfer 5v adapter does...
>
> You would probably need to do it on a per-module basis thoug -
> the bus has a
> rail reserved for 5v, but obviously not a couple for +/-9v.  If you only
> needed +9v though, and you were not using the 5v rail, then i guess you
> could use the reserved 5v system for 9v insted.
>
> Julian
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>



 
Yahoo! Groups Links






 Send instant messages to your online friends http://uk.messenger.yahoo.com 

[Non-text portions of this message have been removed]