Doepfer

Would anyone care to enlighten me on how to get the software ADSRs in the MCV24 to work? 
The manual isn't any help. I can go in, and change trigger mode from direct to ADSR, I know 
how to modify the ADSR settings themselves, but beyond that, I'm out of ideas.

What is the ADSR triggered by? I assume it is triggered by a note, if you've assigned the 
output to receive MIDI note messages, but It isn't really clear to me. 

Where does the ADSR output appear? For example, if in direct mode, the gate signal would 
appear at, say, output 13. If I change from direct to ADSR, I get nothing on output 13. 

What am I missing here, conceptually?

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Matthew Davidson
> Gesendet: Montag, 30. April 2007 03:01
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] MCV24 ADSR - how?
>
>
> Would anyone care to enlighten me on how to get the software
> ADSRs in the MCV24 to work?
> The manual isn't any help. I can go in, and change trigger mode
> from direct to ADSR, I know
> how to modify the ADSR settings themselves, but beyond that, I'm
> out of ideas.
>
> What is the ADSR triggered by? I assume it is triggered by a
> note, if you've assigned the
> output to receive MIDI note messages, but It isn't really clear to me.
>
> Where does the ADSR output appear? For example, if in direct
> mode, the gate signal would
> appear at, say, output 13. If I change from direct to ADSR, I get
> nothing on output 13.
>
> What am I missing here, conceptually?

If you need assistance please contact Christian Assall
(software@doepfer.de). He is the man who programmed the MCV24 firmware and
wrote the user's manual. I'm not the MCV24 specialist and to speak the truth
I prefer "real" hardware - especially for ADSRs.

Best wishes
Dieter Doepfer

> If you need assistance please contact Christian Assall
> (software@...). He is the man who programmed the MCV24 firmware and
> wrote the user's manual. I'm not the MCV24 specialist 

Dieter, thank you for your response.

Can someone send his email address to matthew at blank dot org? Yahoo stripped off the 
email address for me.

>I prefer "real" hardware - especially for ADSRs.

Indeed.

However, this project really needs the software ADSRs as I'm using a monome 40h 
(monome.org) as a hardware front end for a trigger sequencer that is controlling a doepfer 
vocoder. So, I need 15 ADSRs - one for each band.  I also wish to demonstrate this system at 
the regional analog heaven north east gathering here this Saturday. I don't have 15 ADSRs, 
and if I did, I'm not sure I'm up for transporting them.

it's:  software @ doepfer. de


--- Matthew Davidson <matthew@blank.org> wrote:

> > If you need assistance please contact Christian
> Assall
> > (software@...). He is the man who programmed the
> MCV24 firmware and
> > wrote the user's manual. I'm not the MCV24
> specialist 
> 
> Dieter, thank you for your response.
> 
> Can someone send his email address to matthew at
> blank dot org? Yahoo stripped off the 
> email address for me.
> 
> >I prefer "real" hardware - especially for ADSRs.
> 
> Indeed.
> 
> However, this project really needs the software
> ADSRs as I'm using a monome 40h 
> (monome.org) as a hardware front end for a trigger
> sequencer that is controlling a doepfer 
> vocoder. So, I need 15 ADSRs - one for each band.  I
> also wish to demonstrate this system at 
> the regional analog heaven north east gathering here
> this Saturday. I don't have 15 ADSRs, 
> and if I did, I'm not sure I'm up for transporting
> them. 
> 
> 
> 
> 


Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
http://www.parallel-worlds-music.com
http://www.myspace.com/parallelworldsmusic
http://www.myspace.com/interconnectedmusic
http://www.myspace.com/memorygeist
http://www.DiN.org.uk
http://www.shimarecords.co.uk
http://www.rubber.gr
Athens-Greece

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com

Anyone figured this out or do we all have to e-mail to doepfer about 
it? : )

- Markus


--- In Doepfer_a100@yahoogroups.com, "Matthew Davidson" <matthew@...> 
wrote:
>
> Would anyone care to enlighten me on how to get the software ADSRs 
in the MCV24 to work? 
> The manual isn't any help. I can go in, and change trigger mode 
from direct to ADSR, I know 
> how to modify the ADSR settings themselves, but beyond that, I'm 
out of ideas.
> 
> What is the ADSR triggered by? I assume it is triggered by a note, 
if you've assigned the 
> output to receive MIDI note messages, but It isn't really clear to 
me. 
> 
> Where does the ADSR output appear? For example, if in direct mode, 
the gate signal would 
> appear at, say, output 13. If I change from direct to ADSR, I get 
nothing on output 13. 

> 
> What am I missing here, conceptually?
>

--- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote:
>
> > Anyone figured this out or do we all have to e-mail to doepfer about
> > it? : )
> >
> > - Markus
> 
> Christian Assall will be able to help you. He programmed the MCV24 
firmware
> and wrote the user manual. His email address is software(at)doepfer
(dot)de
> 
> Best wishes
> Dieter Doepfer
>

I kinda knew that : ) But thanks anyway. I'll post his answer to here 
too for future reference for those with the same problem.

> Anyone figured this out or do we all have to e-mail to doepfer about
> it? : )
>
> - Markus

Christian Assall will be able to help you. He programmed the MCV24 firmware
and wrote the user manual. His email address is software(at)doepfer(dot)de

Best wishes
Dieter Doepfer

--- In Doepfer_a100@yahoogroups.com, "ysinollaysi" <ysinollaysi@...>
wrote:
>
> --- In Doepfer_a100@yahoogroups.com, <hardware@> wrote:
> >
> > > Anyone figured this out or do we all have to e-mail to doepfer about
> > > it? : )
> > >
> > > - Markus
> > 
> > Christian Assall will be able to help you. He programmed the MCV24 
> firmware
> > and wrote the user manual. His email address is software(at)doepfer
> (dot)de
> > 
> > Best wishes
> > Dieter Doepfer
> >
> 


It's been a week - no answer. Any user comments here?