Doepfer

In a message dated 10/3/2001 8:19:39 PM Eastern Daylight Time, 
krhen@stucki.com writes:


> 
> Anyone using Analogue Systems modules in a Doepfer frame?  I just got an AS
> RS260 Quantizer and an RS360 Vocal Filter (yummie!) only to find that the
> screw holes are about 90 degrees out of phase of the ones on the Doepfer 6U
> rack case!  Guess I'll have to drill new holes in the modules?  Any other
> ideas are welcome.  Thanks
> KRIS
> 



kris,
not sure about what you meant about holes being 90 degrees out of phase but 
on the analogue systems comb filter that i added to my doepfer frames i found 
that i lose 1hp of space on each side due to hole alignment issues.  oddly 
enough, the analogue solutions sq8 8x1 seq. i added to the system fits 
perfectly.
best,
dave





[Non-text portions of this message have been removed]

Hi Dave

> that i lose 1hp of space on each side due to hole alignment issues.  oddly
> enough, the analogue solutions sq8 8x1 seq. i added to the system fits
> perfectly.
As far as I remember Analogue Systems do use a Rack, that has not a
fixed row of nuts but free floating nuts. So they can realize also
frontpanels with an uneven HP count.

BTW: I own a A128 Protoype which has a 19 HP frontpanel. You see it also
happens to Doepfer ;-) 

Florian

-- 
Florian Anwander                  |ConSol*  HP-Support
Tel.   +49.89.45841-133           |Consulting&Solutions Software GmbH
Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de