Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Thread

Re: [Doepfer_a100] Getting Analogue Systems modules into Doepfer frames?

Re: [Doepfer_a100] Getting Analogue Systems modules into Doepfer frames?

2001-10-04 by davevosh@aol.com

In a message dated 10/4/2001 2:28:52 AM Eastern Daylight Time, 
Florian.Anwander@consol.de writes:


> 
> BTW: I own a A128 Protoype which has a 19 HP frontpanel. You see it also
> happens to Doepfer ;-) 
> 
> 


hi florian,
interesting as my a-113 sub-osc seems to be drilled in such a way that i 
couldn`t mount it flush to the side of the frame, i lost 1hp there, too. not 
earth shattering but not good if your module layout plans were "full" at its 
being 26hp not using 27hp. it didn`t really affect my plans other than to 
leave me with an open 1hp at the other end of the frame, though.
best,
dave




[Non-text portions of this message have been removed]

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.