Yahoo Groups archive
Thread
2008-01-09 by Ross Goniakowski
my base A100 system is at least ten years old and needs a good once over......i need the calibration proceedure for the A-110 oscs...i think it was posted a few days ago but i lost the email, could someone post the link again? also, i recall there being info on adjusting the older jacks, i've got some intermittant conections in a few of my mods, unable to locate the info... thanks, rg [Non-text portions of this message have been removed]
2008-01-09 by hardware@doepfer.de
> my base A100 system is at least ten years old and needs a good > once over......i need the calibration proceedure for the A-110 > oscs...i think it was posted a few days ago but i lost the email, > could someone post the link again? also, i recall there being > info on adjusting the older jacks, i've got some intermittant > conections in a few of my mods, unable to locate the info... > > thanks, > rg www.doepfer.com > PRODUCTS > A-100 Module Overview > A-110 > Service Manual Best wishes Dieter Doepfer
2008-01-09 by hardware@doepfer.de
If your are interested in the bit cruncher A-189-1: the first demo sounds are now online. We had a bit problems with the sound card of the new computer (too much hum during recording). That's why it took such a long time to publish the demo (Ingo, thank you for your hints). Best wishes Dieter Doepfer
2008-01-09 by bruce thedekaa
Ow yeah,
This module sounds good:)
Will order one for shure when available.
Greets Bruce
--- hardware@doepfer.de wrote:
> If your are interested in the bit cruncher A-189-1:
> the first demo sounds
> are now online. We had a bit problems with the sound
> card of the new
> computer (too much hum during recording). That's why
> it took such a long
> time to publish the demo (Ingo, thank you for your
> hints).
>
> Best wishes
> Dieter Doepfer
>
>
____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping2008-01-09 by Bakis Sirros
wow, this module sounds crazy! great!
and that is only with a simple one vco input...
best regards,
Bakis.
--- hardware@doepfer.de wrote:
> If your are interested in the bit cruncher A-189-1:
> the first demo sounds
> are now online. We had a bit problems with the sound
> card of the new
> computer (too much hum during recording). That's why
> it took such a long
> time to publish the demo (Ingo, thank you for your
> hints).
>
> Best wishes
> Dieter Doepfer
>
>
Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
http://www.parallel-worlds-music.com
http://www.myspace.com/parallelworldsmusic
http://www.myspace.com/interconnectedmusic
http://www.myspace.com/memorygeist
http://www.DiN.org.uk
http://www.musicamaximamagnetica.com
http://www.shimarecords.co.uk
http://www.rubber.gr
Athens-Greece
____________________________________________________________________________________
Looking for last minute shopping deals?
Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping2008-01-09 by Maxime
That sounds awesome ! This module with 188BBD can make a hell noisy combo ! And the CV inputs on the 189 seems rerally interesting, I need to hear what does a bass when bitcrunched only when the kick slaps or this kind of patches !! Keep goin' ! Max. --- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote: > > If your are interested in the bit cruncher A-189-1: the first demo sounds
> are now online. We had a bit problems with the sound card of the new > computer (too much hum during recording). That's why it took such a long > time to publish the demo (Ingo, thank you for your hints). > > Best wishes > Dieter Doepfer >
2008-01-10 by gabu_004
LOL... and its a running gag in my recording class HAHAHAHA!!! Hery ùHAppy new year Silvain btw! Do you still ues the triple lpg? i'd be on the list to buy it if you ever think of letting it go! ;) g. --- In Doepfer_a100@yahoogroups.com, "Sylvain Delisle" <sdelisle@...> wrote: > > Oh I think that the Shure comapny can buy it by themselves. That's nice of > you to think of them, but me, I'll order it for myself! Thats for sure :) > > Really great new module, congratulation Dieter, I'm sure that it's gonna be > a popular one. > > Sylvain > > -----Message d'origine----- > De : Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]De > la part de bruce thedekaa > Envoyé : Wednesday, January 09, 2008 2:21 PM > À : Doepfer_a100@yahoogroups.com > Objet : Re: [Doepfer_a100] First bit cruncher demos (A-189-1) > > > Ow yeah, > > This module sounds good:) > Will order one for shure when available. > > Greets Bruce > > --- hardware@... wrote: > > > If your are interested in the bit cruncher A-189-1: > > the first demo sounds > > are now online. We had a bit problems with the sound > > card of the new > > computer (too much hum during recording). That's why > > it took such a long > > time to publish the demo (Ingo, thank you for your > > hints). > > > > Best wishes > > Dieter Doepfer > > > > > > __________________________________________________________ > Looking for last minute shopping deals? > Find them fast with Yahoo! Search. > http://tools.search.yahoo.com/newsearch/category.php? category=shopping > > > > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.516 / Virus Database: 269.19.0/1216 - Release Date: 1/9/2008
> 10:16 AM > > > [Non-text portions of this message have been removed] >
2008-01-10 by Sylvain Delisle
Oh I think that the Shure comapny can buy it by themselves. That's nice of you to think of them, but me, I'll order it for myself! Thats for sure :) Really great new module, congratulation Dieter, I'm sure that it's gonna be a popular one. Sylvain -----Message d'origine----- De : Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]De la part de bruce thedekaa Envoyé : Wednesday, January 09, 2008 2:21 PM À : Doepfer_a100@yahoogroups.com Objet : Re: [Doepfer_a100] First bit cruncher demos (A-189-1) Ow yeah, This module sounds good:) Will order one for shure when available. Greets Bruce --- hardware@doepfer.de wrote: > If your are interested in the bit cruncher A-189-1: > the first demo sounds > are now online. We had a bit problems with the sound > card of the new > computer (too much hum during recording). That's why > it took such a long > time to publish the demo (Ingo, thank you for your > hints). > > Best wishes > Dieter Doepfer > > __________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.516 / Virus Database: 269.19.0/1216 - Release Date: 1/9/2008 10:16 AM [Non-text portions of this message have been removed]
2008-01-10 by Stu Grimshaw
yes, congratulation are in order, i think. i must admit, i didn't really see the potential in this idea, since bit crushing was rather done to death in the 90's, but it really is a winner - voltage controlled digital synthesis seems to offer many new approaches. i was particularly impressed by the effect of adding the vca to the input signal. and bit swapping! a real stroke of inspiration. i would join david salter in wondering how these thing will develop. not that i'd be patient enough to wait for the universal ad/da module, the bit crusher is just too good for that :) but this first taste of cv-digital is a real appetit whetter! hut ab! stu
2008-01-10 by hardware@doepfer.de
> wow, this module sounds crazy! great! > and that is only with a simple one vco input... > best regards, > Bakis. I have added another example with a VCA between VCO and the signal input of the A-189-1 Bit cruncher. The sound remembers me a bit to the A-137 wave multiplier. Best wishes Dieter Doepfer
2008-01-10 by David Salter
Very nice sounding module. Looking forward to it's release. Out of interest have you any timelines for other uses of the AD/DA module? Also will it be possible to have a multifunction module or will I need to get one of each type? Rgds David David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699 Get the latest news at Reuters.com <http://www.reuters.com/> ________________________________
From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of hardware@doepfer.de Sent: 10 January 2008 10:01 To: Doepfer_a100@yahoogroups.com Subject: AW: [Doepfer_a100] First bit cruncher demos (A-189-1) > wow, this module sounds crazy! great! > and that is only with a simple one vco input... > best regards, > Bakis. I have added another example with a VCA between VCO and the signal input of the A-189-1 Bit cruncher. The sound remembers me a bit to the A-137 wave multiplier. Best wishes Dieter Doepfer This email was sent to you by Reuters, the global news and information company. To find out more about Reuters visit www.about.reuters.com Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Reuters Limited. Reuters Limited is part of the Reuters Group of companies, of which Reuters Group PLC is the ultimate parent company. Reuters Group PLC - Registered office address: The Reuters Building, South Colonnade, Canary Wharf, London E14 5EP, United Kingdom Registered No: 3296375 Registered in England and Wales [Non-text portions of this message have been removed]
2008-01-10 by hardware@doepfer.de
> Out of interest have you any timelines for other uses of the AD/DA > module? Also will it be possible to have a multifunction module or will > I need to get one of each type? > > Rgds > > David So far there is no timeline for other derivates of the AD/DA prototype. We think about a digital, sampled ring modulator and a clocked version of the A-189-1 (i.e. an external clock input for the sampling rate instead of the CV). But maybe we can find a way to include all these functions into the A-189-1 (e.g. one of the 16 modes is digital RM and an additional switch that switches the SR socket between CV and clock function). In general we tend to release several modules. It is impossible to use the same controls and in/outputs for all functions we are about to plan. And I personally hate these devices with tons of menus and submenus and subsubmenus and endless parameter adjustments where you never know where you are and what are the current settings. I prefer a simple manageable control surface with direct access to as many parameters as possible. And it would take probably years until such a multifunctional universal device would be ready. Best wishes Dieter Doepfer
2008-01-10 by David Salter
Hello Dieter, Thank you for the prompt response. I agree that menu driven systems are a pain and not really workable. I only ask as my real estate is getting very limited now, unless I rack to the ceiling and get a box to stand on :o) Best wishes David David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699 Get the latest news at Reuters.com <http://www.reuters.com/> ________________________________
From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of hardware@doepfer.de Sent: 10 January 2008 10:26 To: Doepfer_a100@yahoogroups.com Subject: AW: [Doepfer_a100] First bit cruncher demos (A-189-1) > Out of interest have you any timelines for other uses of the AD/DA > module? Also will it be possible to have a multifunction module or will > I need to get one of each type? > > Rgds > > David So far there is no timeline for other derivates of the AD/DA prototype. We think about a digital, sampled ring modulator and a clocked version of the A-189-1 (i.e. an external clock input for the sampling rate instead of the CV). But maybe we can find a way to include all these functions into the A-189-1 (e.g. one of the 16 modes is digital RM and an additional switch that switches the SR socket between CV and clock function). In general we tend to release several modules. It is impossible to use the same controls and in/outputs for all functions we are about to plan. And I personally hate these devices with tons of menus and submenus and subsubmenus and endless parameter adjustments where you never know where you are and what are the current settings. I prefer a simple manageable control surface with direct access to as many parameters as possible. And it would take probably years until such a multifunctional universal device would be ready. Best wishes Dieter Doepfer This email was sent to you by Reuters, the global news and information company. To find out more about Reuters visit www.about.reuters.com Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Reuters Limited. Reuters Limited is part of the Reuters Group of companies, of which Reuters Group PLC is the ultimate parent company. Reuters Group PLC - Registered office address: The Reuters Building, South Colonnade, Canary Wharf, London E14 5EP, United Kingdom Registered No: 3296375 Registered in England and Wales [Non-text portions of this message have been removed]
2008-01-10 by verstaerker
that bitcrusher sounds really intresting! looking forward to test it myself
> If your are interested in the bit cruncher A-189-1: the first demo sounds > are now online. We had a bit problems with the sound card of the new > computer (too much hum during recording). That's why it took such a long > time to publish the demo (Ingo, thank you for your hints). > Best wishes > Dieter Doepfer >