Doepfer

hello, friends
why my a119 ext in & env follower only works when triggered by the
envelope?, perhaps it s faulty? i see on You Tube some videos using the 
module just using the in and out, for instance to filtering any
external device.

many thanks to everyone
Miguel

hi miguel,

how do you have the a119 connected up at the moment?

just using the in and out won't produce any filtering, although the
distortion you can get from the overdriven input can be useful :)

cheers,

stu

--- In Doepfer_a100@yahoogroups.com, "pro2andrius" <ventral@...> wrote:

>
> hello, friends
> why my a119 ext in & env follower only works when triggered by the
> envelope?, perhaps it s faulty? i see on You Tube some videos using the 
> module just using the in and out, for instance to filtering any
> external device.
> 
> many thanks to everyone
> Miguel
>

i connect a signal input *i tried both symm in and asym in , but i can
t get the output signal if i can see the overdrive led when i increase
the volume.. so i think it s pre amp it doesn t work.. what do you think??
thanks!!!
Miguel




--- In Doepfer_a100@yahoogroups.com, "Stu Grimshaw" <grimshaw@...> wrote:
>
> hi miguel,
> 
> how do you have the a119 connected up at the moment?
> 
> just using the in and out won't produce any filtering, although the
> distortion you can get from the overdriven input can be useful :)
> 
> cheers,
> 
> stu
> 
> --- In Doepfer_a100@yahoogroups.com, "pro2andrius" <ventral@> wrote:
> >
> > hello, friends
> > why my a119 ext in & env follower only works when triggered by the
> > envelope?, perhaps it s faulty? i see on You Tube some videos
using the 

> > module just using the in and out, for instance to filtering any
> > external device.
> > 
> > many thanks to everyone
> > Miguel
> >
>

> i connect a signal input *i tried both symm in and asym in , but i can
> t get the output signal if i can see the overdrive led when i increase
> the volume.. so i think it s pre amp it doesn t work.. what do you think??
> thanks!!!
> Miguel

If the overload and/or envelope LED lights up the pre amp is OK as it is
before the distortion display and envelope circuits. If you cannot obtain a
signal at the audio output probably the corresponding socket is broken. But
the audio output is available twice and one of both sockets should work. It
is very improbably that both sockets are broken. If you cannot get a signal
at any of the audio output sockets the module has to be repaired. Please
send it to the representative or dealer where you purchased the module.

Best wishes
Dieter Doepfer