Doepfer

hi there

Here are few ideas for modules of which i've dreamed since many years 
now and which i hoped i would to see apearing during the first decade 
of the 21th century but as for 2008 no one has yet done any of them...

i've just added some polls for you to vote about 4 digital modules, 1 
strange module and 2 utility modules:

VC GRAIN PROCESSOR with vc delaytime, vc feedback, vc pitch, vc 
grainsize, vc grain direction, vc grain laptime, vc grain atack, vc 
grain release

VC GRAIN GENERATOR with vc sampselect, vc startpoint, vc loop point, 
vc pitch, vc grainsize, vc grain direction, vc grain lap, vc grain 
atack, vc grain release, vc position pointer

VC MULTI-SAMPLE RECORDER/LOOPER/DELAY like a digitech's "jam man" in 
a module with large memory, MDcards, gateplay, trigreset, vc 
sampselect, vc pitch, reversible vc startloop & stoploop points

VC DIGITAL MULTI EFFECTS PROCESSOR with several CV inputs to control 
parameters of a DSP and some memory for reverbs, delays, resonators, 
amp simulators, dynamics...

VC WIDERANGE RADIO RECEIVER (FROM VLF TO CW) with vc freq zone 
selector, vc freq finetune, and vc q factor (like in the old lamp 
radios)

SENSOR TO CV VOLTAGE ADAPTOR with voltage gain, offset , range, and 
linearity controls, lag process and noise filter to adapt any kind of 
sensor to normalized CV

SENSOR TO GATE/TRIG ADAPTOR with voltage gain, low headroom, high 
headroom controls and selector for trig or gate modes to use any kind 
of sensor to normalized GATE/TRIG


let me know what you think about these ideas

cheers

gaspar uleg

i sent these ideas to ddoepfer and he suggested me to open polls on 
the group to see what others think about

--- In Doepfer_a100@yahoogroups.com, Bakis Sirros 
<synth_freak_2000@...> wrote:
>
> no, they are not from doepfer. i did not make the
> polls either.
> every member can make their own polls. but that does
> not mean that these proposals are actually doable...
> anyway, of course anyone is free to vote.
> best regards,
> Bakis.
> 
> 
> --- Floppy <floppyscratcher@...> wrote:
> 
> > ohh the proposals are not from doepfer ?
> > i voted yes for all of them and was already planing
> > my next rack
> > because of this funky proposals ! hahahah
> > 
> > when i read them i was wondering if analog
> > combfilters exist ?
> > 
> >  
> > 
> > 
> > 
> > 
> > gasp_uleg schrieb:
> > >
> > > hi there
> > >
> > > Here are few ideas for modules of which i've
> > dreamed since many years
> > > now and which i hoped i would to see apearing
> > during the first decade
> > > of the 21th century but as for 2008 no one has yet
> > done any of them...
> > >
> > > i've just added some polls for you to vote about 4
> > digital modules, 1
> > > strange module and 2 utility modules:
> > >
> > > VC GRAIN PROCESSOR with vc delaytime, vc feedback,
> > vc pitch, vc
> > > grainsize, vc grain direction, vc grain laptime,
> > vc grain atack, vc
> > > grain release
> > >
> > > VC GRAIN GENERATOR with vc sampselect, vc
> > startpoint, vc loop point,
> > > vc pitch, vc grainsize, vc grain direction, vc
> > grain lap, vc grain
> > > atack, vc grain release, vc position pointer
> > >
> > > VC MULTI-SAMPLE RECORDER/LOOPER/DELAY like a
> > digitech's "jam man" in
> > > a module with large memory, MDcards, gateplay,
> > trigreset, vc
> > > sampselect, vc pitch, reversible vc startloop &
> > stoploop points
> > >
> > > VC DIGITAL MULTI EFFECTS PROCESSOR with several CV
> > inputs to control
> > > parameters of a DSP and some memory for reverbs,
> > delays, resonators,
> > > amp simulators, dynamics...
> > >
> > > VC WIDERANGE RADIO RECEIVER (FROM VLF TO CW) with
> > vc freq zone
> > > selector, vc freq finetune, and vc q factor (like
> > in the old lamp
> > > radios)
> > >
> > > SENSOR TO CV VOLTAGE ADAPTOR with voltage gain,
> > offset , range, and
> > > linearity controls, lag process and noise filter
> > to adapt any kind of
> > > sensor to normalized CV
> > >
> > > SENSOR TO GATE/TRIG ADAPTOR with voltage gain, low
> > headroom, high
> > > headroom controls and selector for trig or gate
> > modes to use any kind
> > > of sensor to normalized GATE/TRIG
> > >
> > > let me know what you think about these ideas
> > >
> > > cheers
> > >
> > > gaspar uleg
> > >
> > >  
> > 
> > 
> > 
> > [Non-text portions of this message have been
> > removed]
> > 
> > 
> 
> 
> Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
> [Doepfer_a100] group owner
> http://www.parallel-worlds-music.com
> http://www.myspace.com/parallelworldsmusic
> http://www.myspace.com/interconnectedmusic
> http://www.myspace.com/memorygeist
> http://www.DiN.org.uk
> http://www.musicamaximamagnetica.com
> http://www.shimarecords.co.uk
> http://www.rubber.gr
> Athens-Greece
> 
> 
>       
____________________________________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile.  Try it now.  http://
mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>

ohh the proposals are not from doepfer ?
i voted yes for all of them and was already planing my next rack
because of this funky proposals ! hahahah

when i read them i was wondering if analog combfilters exist ?

 




gasp_uleg schrieb:
>
> hi there
>
> Here are few ideas for modules of which i've dreamed since many years
> now and which i hoped i would to see apearing during the first decade
> of the 21th century but as for 2008 no one has yet done any of them...
>
> i've just added some polls for you to vote about 4 digital modules, 1
> strange module and 2 utility modules:
>
> VC GRAIN PROCESSOR with vc delaytime, vc feedback, vc pitch, vc
> grainsize, vc grain direction, vc grain laptime, vc grain atack, vc
> grain release
>
> VC GRAIN GENERATOR with vc sampselect, vc startpoint, vc loop point,
> vc pitch, vc grainsize, vc grain direction, vc grain lap, vc grain
> atack, vc grain release, vc position pointer
>
> VC MULTI-SAMPLE RECORDER/LOOPER/DELAY like a digitech's "jam man" in
> a module with large memory, MDcards, gateplay, trigreset, vc
> sampselect, vc pitch, reversible vc startloop & stoploop points
>
> VC DIGITAL MULTI EFFECTS PROCESSOR with several CV inputs to control
> parameters of a DSP and some memory for reverbs, delays, resonators,
> amp simulators, dynamics...
>
> VC WIDERANGE RADIO RECEIVER (FROM VLF TO CW) with vc freq zone
> selector, vc freq finetune, and vc q factor (like in the old lamp
> radios)
>
> SENSOR TO CV VOLTAGE ADAPTOR with voltage gain, offset , range, and
> linearity controls, lag process and noise filter to adapt any kind of
> sensor to normalized CV
>
> SENSOR TO GATE/TRIG ADAPTOR with voltage gain, low headroom, high
> headroom controls and selector for trig or gate modes to use any kind
> of sensor to normalized GATE/TRIG
>
> let me know what you think about these ideas
>
> cheers
>
> gaspar uleg
>
>  



[Non-text portions of this message have been removed]

I'm in favour of CV controlled digital modules.
 
I expressed an interest in granular a while ago however the problem that
Dieter and the team will have is the amount of processing power and
memory needed to do this in real time, especially if you want smooth
transitions between very small grains.
 
But if it can be done?
 
Rgds
 
David
 
David Salter
Senior Consultant
PSG 

Reuters Messaging: david.salter.reuters.com@reuters.net
(t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699 

Get the latest news at Reuters.com <http://www.reuters.com/> 

 

________________________________

From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
On Behalf Of gasp_uleg
Sent: 12 February 2008 12:07
To: Doepfer_a100@yahoogroups.com
Subject: [Doepfer_a100] new modules proposals to DOEPFER



hi there

Here are few ideas for modules of which i've dreamed since many years 
now and which i hoped i would to see apearing during the first decade 
of the 21th century but as for 2008 no one has yet done any of them...

i've just added some polls for you to vote about 4 digital modules, 1 
strange module and 2 utility modules:

VC GRAIN PROCESSOR with vc delaytime, vc feedback, vc pitch, vc 
grainsize, vc grain direction, vc grain laptime, vc grain atack, vc 
grain release

VC GRAIN GENERATOR with vc sampselect, vc startpoint, vc loop point, 
vc pitch, vc grainsize, vc grain direction, vc grain lap, vc grain 
atack, vc grain release, vc position pointer

VC MULTI-SAMPLE RECORDER/LOOPER/DELAY like a digitech's "jam man" in 
a module with large memory, MDcards, gateplay, trigreset, vc 
sampselect, vc pitch, reversible vc startloop & stoploop points

VC DIGITAL MULTI EFFECTS PROCESSOR with several CV inputs to control 
parameters of a DSP and some memory for reverbs, delays, resonators, 
amp simulators, dynamics...

VC WIDERANGE RADIO RECEIVER (FROM VLF TO CW) with vc freq zone 
selector, vc freq finetune, and vc q factor (like in the old lamp 
radios)

SENSOR TO CV VOLTAGE ADAPTOR with voltage gain, offset , range, and 
linearity controls, lag process and noise filter to adapt any kind of 
sensor to normalized CV

SENSOR TO GATE/TRIG ADAPTOR with voltage gain, low headroom, high 
headroom controls and selector for trig or gate modes to use any kind 
of sensor to normalized GATE/TRIG

let me know what you think about these ideas

cheers

gaspar uleg



 


This email was sent to you by Reuters, the global news and information company. 
To find out more about Reuters visit www.about.reuters.com

Any views expressed in this message are those of the individual sender, 
except where the sender specifically states them to be the views of Reuters Limited.

Reuters Limited is part of the Reuters Group of companies, of which Reuters Group PLC is the ultimate parent company.
Reuters Group PLC - Registered office address: The Reuters Building, South Colonnade, Canary Wharf, London E14 5EP, United Kingdom
Registered No: 3296375
Registered in England and Wales



[Non-text portions of this message have been removed]

no, they are not from doepfer. i did not make the
polls either.
every member can make their own polls. but that does
not mean that these proposals are actually doable...
anyway, of course anyone is free to vote.
best regards,
Bakis.


--- Floppy <floppyscratcher@googlemail.com> wrote:

> ohh the proposals are not from doepfer ?
> i voted yes for all of them and was already planing
> my next rack
> because of this funky proposals ! hahahah
> 
> when i read them i was wondering if analog
> combfilters exist ?
> 
>  
> 
> 
> 
> 
> gasp_uleg schrieb:
> >
> > hi there
> >
> > Here are few ideas for modules of which i've
> dreamed since many years
> > now and which i hoped i would to see apearing
> during the first decade
> > of the 21th century but as for 2008 no one has yet
> done any of them...
> >
> > i've just added some polls for you to vote about 4
> digital modules, 1
> > strange module and 2 utility modules:
> >
> > VC GRAIN PROCESSOR with vc delaytime, vc feedback,
> vc pitch, vc
> > grainsize, vc grain direction, vc grain laptime,
> vc grain atack, vc
> > grain release
> >
> > VC GRAIN GENERATOR with vc sampselect, vc
> startpoint, vc loop point,
> > vc pitch, vc grainsize, vc grain direction, vc
> grain lap, vc grain
> > atack, vc grain release, vc position pointer
> >
> > VC MULTI-SAMPLE RECORDER/LOOPER/DELAY like a
> digitech's "jam man" in
> > a module with large memory, MDcards, gateplay,
> trigreset, vc
> > sampselect, vc pitch, reversible vc startloop &
> stoploop points
> >
> > VC DIGITAL MULTI EFFECTS PROCESSOR with several CV
> inputs to control
> > parameters of a DSP and some memory for reverbs,
> delays, resonators,
> > amp simulators, dynamics...
> >
> > VC WIDERANGE RADIO RECEIVER (FROM VLF TO CW) with
> vc freq zone
> > selector, vc freq finetune, and vc q factor (like
> in the old lamp
> > radios)
> >
> > SENSOR TO CV VOLTAGE ADAPTOR with voltage gain,
> offset , range, and
> > linearity controls, lag process and noise filter
> to adapt any kind of
> > sensor to normalized CV
> >
> > SENSOR TO GATE/TRIG ADAPTOR with voltage gain, low
> headroom, high
> > headroom controls and selector for trig or gate
> modes to use any kind
> > of sensor to normalized GATE/TRIG
> >
> > let me know what you think about these ideas
> >
> > cheers
> >
> > gaspar uleg
> >
> >  
> 
> 
> 
> [Non-text portions of this message have been
> removed]
> 
> 


Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
http://www.parallel-worlds-music.com
http://www.myspace.com/parallelworldsmusic
http://www.myspace.com/interconnectedmusic
http://www.myspace.com/memorygeist
http://www.DiN.org.uk
http://www.musicamaximamagnetica.com
http://www.shimarecords.co.uk
http://www.rubber.gr
Athens-Greece


      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

ok


--- gasp_uleg <uleg2@hotmail.com> wrote:

> i sent these ideas to ddoepfer and he suggested me
> to open polls on 
> the group to see what others think about
> 
> --- In Doepfer_a100@yahoogroups.com, Bakis Sirros 
> <synth_freak_2000@...> wrote:
> >
> > no, they are not from doepfer. i did not make the
> > polls either.
> > every member can make their own polls. but that
> does
> > not mean that these proposals are actually
> doable...
> > anyway, of course anyone is free to vote.
> > best regards,
> > Bakis.
> > 
> > 
> > --- Floppy <floppyscratcher@...> wrote:
> > 
> > > ohh the proposals are not from doepfer ?
> > > i voted yes for all of them and was already
> planing
> > > my next rack
> > > because of this funky proposals ! hahahah
> > > 
> > > when i read them i was wondering if analog
> > > combfilters exist ?
> > > 
> > >  
> > > 
> > > 
> > > 
> > > 
> > > gasp_uleg schrieb:
> > > >
> > > > hi there
> > > >
> > > > Here are few ideas for modules of which i've
> > > dreamed since many years
> > > > now and which i hoped i would to see apearing
> > > during the first decade
> > > > of the 21th century but as for 2008 no one has
> yet
> > > done any of them...
> > > >
> > > > i've just added some polls for you to vote
> about 4
> > > digital modules, 1
> > > > strange module and 2 utility modules:
> > > >
> > > > VC GRAIN PROCESSOR with vc delaytime, vc
> feedback,
> > > vc pitch, vc
> > > > grainsize, vc grain direction, vc grain
> laptime,
> > > vc grain atack, vc
> > > > grain release
> > > >
> > > > VC GRAIN GENERATOR with vc sampselect, vc
> > > startpoint, vc loop point,
> > > > vc pitch, vc grainsize, vc grain direction, vc
> > > grain lap, vc grain
> > > > atack, vc grain release, vc position pointer
> > > >
> > > > VC MULTI-SAMPLE RECORDER/LOOPER/DELAY like a
> > > digitech's "jam man" in
> > > > a module with large memory, MDcards, gateplay,
> > > trigreset, vc
> > > > sampselect, vc pitch, reversible vc startloop
> &
> > > stoploop points
> > > >
> > > > VC DIGITAL MULTI EFFECTS PROCESSOR with
> several CV
> > > inputs to control
> > > > parameters of a DSP and some memory for
> reverbs,
> > > delays, resonators,
> > > > amp simulators, dynamics...
> > > >
> > > > VC WIDERANGE RADIO RECEIVER (FROM VLF TO CW)
> with
> > > vc freq zone
> > > > selector, vc freq finetune, and vc q factor
> (like
> > > in the old lamp
> > > > radios)
> > > >
> > > > SENSOR TO CV VOLTAGE ADAPTOR with voltage
> gain,
> > > offset , range, and
> > > > linearity controls, lag process and noise
> filter
> > > to adapt any kind of
> > > > sensor to normalized CV
> > > >
> > > > SENSOR TO GATE/TRIG ADAPTOR with voltage gain,
> low
> > > headroom, high
> > > > headroom controls and selector for trig or
> gate
> > > modes to use any kind
> > > > of sensor to normalized GATE/TRIG
> > > >
> > > > let me know what you think about these ideas
> > > >
> > > > cheers
> > > >
> > > > gaspar uleg
> > > >
> > > >  
> > > 
> > > 
> > > 
> > > [Non-text portions of this message have been
> > > removed]
> > > 
> > > 
> > 
> > 
> > Bakis Sirros - Parallel Worlds / Interconnected /
> Memory Geist
> > [Doepfer_a100] group owner
> > http://www.parallel-worlds-music.com
> > http://www.myspace.com/parallelworldsmusic
> > http://www.myspace.com/interconnectedmusic
> > http://www.myspace.com/memorygeist
> > http://www.DiN.org.uk
> > http://www.musicamaximamagnetica.com
> > http://www.shimarecords.co.uk
> > http://www.rubber.gr
> > Athens-Greece
> > 
> > 
> >       
>
____________________________________________________________________________________
> > Be a better friend, newshound, and 
> > know-it-all with Yahoo! Mobile.  Try it now. 
> http://
> mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> >
> 
> 
> 


Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
http://www.parallel-worlds-music.com
http://www.myspace.com/parallelworldsmusic
http://www.myspace.com/interconnectedmusic
http://www.myspace.com/memorygeist
http://www.DiN.org.uk
http://www.musicamaximamagnetica.com
http://www.shimarecords.co.uk
http://www.rubber.gr
Athens-Greece


      ____________________________________________________________________________________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping

I'm not sure I understand the ideas behind the proposed modules - it
would be nice with a short description of what each of them is
supposed to do, not just the inputs and outputs. The ones I think I
understand seem dandy, though.

/Silas

On Feb 12, 2008 1:07 PM, gasp_uleg <uleg2@hotmail.com> wrote:
>
>
>
>
>
>
> hi there
>
>  Here are few ideas for modules of which i've dreamed since many years
>  now and which i hoped i would to see apearing during the first decade
>  of the 21th century but as for 2008 no one has yet done any of them...
>
>  i've just added some polls for you to vote about 4 digital modules, 1
>  strange module and 2 utility modules:
>
>  VC GRAIN PROCESSOR with vc delaytime, vc feedback, vc pitch, vc
>  grainsize, vc grain direction, vc grain laptime, vc grain atack, vc
>  grain release
>
>  VC GRAIN GENERATOR with vc sampselect, vc startpoint, vc loop point,
>  vc pitch, vc grainsize, vc grain direction, vc grain lap, vc grain
>  atack, vc grain release, vc position pointer
>
>  VC MULTI-SAMPLE RECORDER/LOOPER/DELAY like a digitech's "jam man" in
>  a module with large memory, MDcards, gateplay, trigreset, vc
>  sampselect, vc pitch, reversible vc startloop & stoploop points
>
>  VC DIGITAL MULTI EFFECTS PROCESSOR with several CV inputs to control
>  parameters of a DSP and some memory for reverbs, delays, resonators,
>  amp simulators, dynamics...
>
>  VC WIDERANGE RADIO RECEIVER (FROM VLF TO CW) with vc freq zone
>  selector, vc freq finetune, and vc q factor (like in the old lamp
>  radios)
>
>  SENSOR TO CV VOLTAGE ADAPTOR with voltage gain, offset , range, and
>  linearity controls, lag process and noise filter to adapt any kind of
>  sensor to normalized CV
>
>  SENSOR TO GATE/TRIG ADAPTOR with voltage gain, low headroom, high
>  headroom controls and selector for trig or gate modes to use any kind
>  of sensor to normalized GATE/TRIG
>
>  let me know what you think about these ideas
>
>  cheers
>
>  gaspar uleg
>
>

SENSOR TO CV VOLTAGE ADAPTOR with voltage gain, offset , range, and 
linearity controls, lag process and noise filter to adapt any kind of 
sensor to normalized CV
 
SENSOR TO GATE/TRIG ADAPTOR with voltage gain, low headroom, high 
headroom controls and selector for trig or gate modes to use any kind 
of sensor to normalized GATE/TRIG

These two seem as though they could be done using the A119 follower, a slew module and a gate to trigger module.

If I am wrong, please explain what it is that would make this proposed module different.

Thanx,

Tony


> To: Doepfer_a100@yahoogroups.com
> From: uleg2@hotmail.com
> Date: Tue, 12 Feb 2008 12:07:04 +0000
> Subject: [Doepfer_a100] new modules proposals to DOEPFER
> 
> hi there
> 
> Here are few ideas for modules of which i've dreamed since many years 
> now and which i hoped i would to see apearing during the first decade 
> of the 21th century but as for 2008 no one has yet done any of them...
> 
> i've just added some polls for you to vote about 4 digital modules, 1 
> strange module and 2 utility modules:
> 
> VC GRAIN PROCESSOR with vc delaytime, vc feedback, vc pitch, vc 
> grainsize, vc grain direction, vc grain laptime, vc grain atack, vc 
> grain release
> 
> VC GRAIN GENERATOR with vc sampselect, vc startpoint, vc loop point, 
> vc pitch, vc grainsize, vc grain direction, vc grain lap, vc grain 
> atack, vc grain release, vc position pointer
> 
> VC MULTI-SAMPLE RECORDER/LOOPER/DELAY like a digitech's "jam man" in 
> a module with large memory, MDcards, gateplay, trigreset, vc 
> sampselect, vc pitch, reversible vc startloop & stoploop points
> 
> VC DIGITAL MULTI EFFECTS PROCESSOR with several CV inputs to control 
> parameters of a DSP and some memory for reverbs, delays, resonators, 
> amp simulators, dynamics...
> 
> VC WIDERANGE RADIO RECEIVER (FROM VLF TO CW) with vc freq zone 
> selector, vc freq finetune, and vc q factor (like in the old lamp 
> radios)
> 
> SENSOR TO CV VOLTAGE ADAPTOR with voltage gain, offset , range, and 
> linearity controls, lag process and noise filter to adapt any kind of 
> sensor to normalized CV
> 
> SENSOR TO GATE/TRIG ADAPTOR with voltage gain, low headroom, high 
> headroom controls and selector for trig or gate modes to use any kind 
> of sensor to normalized GATE/TRIG
> 
> 
> let me know what you think about these ideas
> 
> cheers
> 
> gaspar uleg
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 

_________________________________________________________________
Need to know the score, the latest news, or you need your Hotmail®-get your "fix".
http://www.msnmobilefix.com/Default.aspx

[Non-text portions of this message have been removed]

Hello

The last days two of you proposed a radio receiver as a module. To my 
knowledge there is no chance to get these, because everyone who wants to 
produce and sell radio receivers to the end customer has to obey very 
strict rules, has do to extensive testings and certifications; the tests 
and certifications cost very much money, so there would be no return of 
costs. Especially since you simply can pick any five dollar radio with a 
1/8" output and connect it to the A-100, no one would buy a Doepfer 
module which would have to cost 20 or 30 times more.

Florian

a radio reciever which you could sequence via CV and modulate with LFOs would be a different thing though - 

crazy, and rather specilaised, but different!

Richard

  ----- Original Message ----- 
  From: Anwander, Florian 
  To: Doepfer_a100@yahoogroups.com 
  Sent: Wednesday, February 13, 2008 11:35 AM
  Subject: [Doepfer_a100]Radio receiver, was: new modules proposals


  Hello

  The last days two of you proposed a radio receiver as a module. To my 
  knowledge there is no chance to get these, because everyone who wants to 
  produce and sell radio receivers to the end customer has to obey very 
  strict rules, has do to extensive testings and certifications; the tests 
  and certifications cost very much money, so there would be no return of 
  costs. Especially since you simply can pick any five dollar radio with a 
  1/8" output and connect it to the A-100, no one would buy a Doepfer 
  module which would have to cost 20 or 30 times more.

  Florian


   

-- 
I am using the free version of SPAMfighter for private users.
It has removed 308 spam emails to date.
Paying users do not have this message in their emails.
Get the free SPAMfighter here: http://www.spamfighter.com/len


[Non-text portions of this message have been removed]

> VC DIGITAL MULTI EFFECTS PROCESSOR with several CV inputs to control
> parameters of a DSP and some memory for reverbs, delays, resonators,
> amp simulators, dynamics...

So far we have two prototypes of such a module available (based on DSP
boards by other companies). But both have unacceptable disadvantages: the
first version does mute the sound when certain parameters are changed via CV
(e.g. delay length), the second generates audible glitches or clicks when
certain parameters are changed. We are waiting for another DSP board from a
company who promised that their board does not have these drawbacks. We will
see ...

Best wishes
Dieter Doepfer

Hi,

I have had STEIM (www.steim.nl) design a radio for me that can be controlled
by sensors - it works with CVs too but not so good as with sensors. I was
hoping for a bigger range of tuning but it turned out to be quite limited.
The radio to be used here should allow continuous tuning, similar to an
analog tuning radio.

Korhan


On 2/13/08, Richard Scott <richard_scott@rwnc.co.uk> wrote:
>
>   a radio reciever which you could sequence via CV and modulate with LFOs
> would be a different thing though -
>
> crazy, and rather specilaised, but different!
>
> Richard
>
> ----- Original Message -----
> From: Anwander, Florian
> To: Doepfer_a100@yahoogroups.com <Doepfer_a100%40yahoogroups.com>
> Sent: Wednesday, February 13, 2008 11:35 AM
> Subject: [Doepfer_a100]Radio receiver, was: new modules proposals
>
> Hello
>
> The last days two of you proposed a radio receiver as a module. To my
> knowledge there is no chance to get these, because everyone who wants to
> produce and sell radio receivers to the end customer has to obey very
> strict rules, has do to extensive testings and certifications; the tests
> and certifications cost very much money, so there would be no return of
> costs. Especially since you simply can pick any five dollar radio with a
> 1/8" output and connect it to the A-100, no one would buy a Doepfer
> module which would have to cost 20 or 30 times more.
>
> Florian
>
> --
> I am using the free version of SPAMfighter for private users.
> It has removed 308 spam emails to date.
> Paying users do not have this message in their emails.
> Get the free SPAMfighter here: http://www.spamfighter.com/len
>
> [Non-text portions of this message have been removed]
>
> 
>


[Non-text portions of this message have been removed]