Doepfer

Rarely, but sometimes.
 
Maybe emails should use a format like
 
"panning module (A134) connected to two VCA's (A131)"
 
thereby making it obvious which VCA your refering too.
 
Regards
 
 

David Salter 
Reuters Consulting 
Tel: +44 20 7542 2402 
Mob: +44 7990562402 
Fax: +44 20 7542 2699 

	-----Original Message-----
	From: unknown freak [mailto:ospengler@rcn.com] 
	Sent: 08 August 2002 15:46
	To: Doepfer_a100@yahoogroups.com
	Subject: [Doepfer_a100] random question
	
	
	Ok, random question:
	
	How many of you have to look up the module numbers mentioned in emails
	to determine what's being talked about?
	
	(With a couple of exceptions -- A-190 and A-111 -- I always think of
	mine by their functions rather than their numbers.)
	
	> -----Original Message-----
	> From: buechlerjoe [mailto:buechlerjoe@toadmail.com] 
	> Sent: Thursday, August 08, 2002 10:41 AM
	> To: Doepfer_a100@yahoogroups.com
	> Subject: [Doepfer_a100] Re: A100/Roland System 100/Cubase
	> 
	> 
	> > I strongly advice against using multis for vco purpose, it is quite
	> > frankly useless in my opinion. 
	> 
	> The only exception I make is when I occasionally use a multiple to 
	> split the pitch CV into raw and slew-limited paths, and use an A150 
	> VC switch patched to the A185 as a portamento control.
	> 
	> This seems to work fine, and it's useful when the A190 portamento 
	> function won't do - when I need the A170's dual rate 
	> controls, or when 
	> I'm controlling the A100 directly from my midi keyboard, 
	> which doesn't 
	> have a Controller #65 capability.
	> 
	> Joe
	
	
	
	
Yahoo! Groups Sponsor	
 <http://us.a1.yimg.com/us.yimg.com/a/le/lensexpress/lensexpress_468x60b.gif> 
Click here to find your contact lenses! <http://rd.yahoo.com/M=225674.2075965.3644786.1829184/D=egroupweb/S=1705032144:HM/A=1153174/R=7/*http://www.lensexpress.com> 

	To unsubscribe from this group, send an email to:
	doepfer_a100-unsubscribe@yahoogroups.com
	
	
	
	Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> . 
	



-------------------------------------------------------------- --
        Visit our Internet site at http://www.reuters.com

Any views expressed in this message are those of  the  individual
sender,  except  where  the sender specifically states them to be
the views of Reuters Ltd.


[Non-text portions of this message have been removed]

hi list,
i agree with david.
despite the fact that i know most of the module
numbers by heart,i think it would be more helpful for
new members to mention the module function and the
number,too.
bakis.

--- David Salter <david.salter@reuters.com> wrote:
> Rarely, but sometimes.
>  
> Maybe emails should use a format like
>  
> "panning module (A134) connected to two VCA's
> (A131)"
>  
> thereby making it obvious which VCA your refering
> too.
>  
> Regards
>  
>  
> 
> David Salter 
> Reuters Consulting 
> Tel: +44 20 7542 2402 
> Mob: +44 7990562402 
> Fax: +44 20 7542 2699 
> 
> 	-----Original Message-----
> 	From: unknown freak [mailto:ospengler@rcn.com] 
> 	Sent: 08 August 2002 15:46
> 	To: Doepfer_a100@yahoogroups.com
> 	Subject: [Doepfer_a100] random question
> 	
> 	
> 	Ok, random question:
> 	
> 	How many of you have to look up the module numbers
> mentioned in emails
> 	to determine what's being talked about?
> 	
> 	(With a couple of exceptions -- A-190 and A-111 --
> I always think of
> 	mine by their functions rather than their numbers.)
> 	
> 	> -----Original Message-----
> 	> From: buechlerjoe
> [mailto:buechlerjoe@toadmail.com] 
> 	> Sent: Thursday, August 08, 2002 10:41 AM
> 	> To: Doepfer_a100@yahoogroups.com
> 	> Subject: [Doepfer_a100] Re: A100/Roland System
> 100/Cubase
> 	> 
> 	> 
> 	> > I strongly advice against using multis for vco
> purpose, it is quite
> 	> > frankly useless in my opinion. 
> 	> 
> 	> The only exception I make is when I occasionally
> use a multiple to 
> 	> split the pitch CV into raw and slew-limited
> paths, and use an A150 
> 	> VC switch patched to the A185 as a portamento
> control.
> 	> 
> 	> This seems to work fine, and it's useful when the
> A190 portamento 
> 	> function won't do - when I need the A170's dual
> rate 
> 	> controls, or when 
> 	> I'm controlling the A100 directly from my midi
> keyboard, 
> 	> which doesn't 
> 	> have a Controller #65 capability.
> 	> 
> 	> Joe
> 	
> 	
> 	
> 	
> Yahoo! Groups Sponsor	
> 
>
<http://us.a1.yimg.com/us.yimg.com/a/le/lensexpress/lensexpress_468x60b.gif>
> 
> Click here to find your contact lenses!
>
<http://rd.yahoo.com/M=225674.2075965.3644786.1829184/D=egroupweb/S=1705032144:HM/A=1153174/R=7/*http://www.lensexpress.com>
> 
> 
> 	To unsubscribe from this group, send an email to:
> 	doepfer_a100-unsubscribe@yahoogroups.com
> 	
> 	
> 	
> 	Your use of Yahoo! Groups is subject to the Yahoo!
> Terms of Service <http://docs.yahoo.com/info/terms/>
> . 
> 	
> 
> 
> 
>
--------------------------------------------------------------
> --
>         Visit our Internet site at
> http://www.reuters.com
> 
> Any views expressed in this message are those of 
> the  individual
> sender,  except  where  the sender specifically
> states them to be
> the views of Reuters Ltd.
> 
> 
> [Non-text portions of this message have been
> removed]
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do You Yahoo!?
HotJobs - Search Thousands of New Jobs
http://www.hotjobs.com

> ...patch the Hz/V signal to the CV input of an A121               > 
exponential VCA,

It's even better if you mention the -correct- module number ;-)

Joe

--- In Doepfer_a100@y..., bakis Sirros <synth_freak_2000@y...> wrote:
> hi list,
> i agree with david.
> despite the fact that i know most of the module
> numbers by heart,i think it would be more helpful for
> new members to mention the module function and the
> number,too.
> bakis.
> 
> --- David Salter <david.salter@r...> wrote:
> > Rarely, but sometimes.
> >  
> > Maybe emails should use a format like
> >  
> > "panning module (A134) connected to two VCA's
> > (A131)"
> >  
> > thereby making it obvious which VCA your refering
> > too.
> >  
> > Regards
> >  
> >  
> > 
> > David Salter 
> > Reuters Consulting 
> > Tel: +44 20 7542 2402 
> > Mob: +44 7990562402 
> > Fax: +44 20 7542 2699 
> > 
> > 	-----Original Message-----
> > 	From: unknown freak [mailto:ospengler@r...] 
> > 	Sent: 08 August 2002 15:46
> > 	To: Doepfer_a100@y...
> > 	Subject: [Doepfer_a100] random question
> > 	
> > 	
> > 	Ok, random question:
> > 	
> > 	How many of you have to look up the module numbers
> > mentioned in emails
> > 	to determine what's being talked about?
> > 	
> > 	(With a couple of exceptions -- A-190 and A-111 --
> > I always think of
> > 	mine by their functions rather than their numbers.)
> > 	
> > 	> -----Original Message-----
> > 	> From: buechlerjoe
> > [mailto:buechlerjoe@t...] 
> > 	> Sent: Thursday, August 08, 2002 10:41 AM
> > 	> To: Doepfer_a100@y...
> > 	> Subject: [Doepfer_a100] Re: A100/Roland System
> > 100/Cubase
> > 	> 
> > 	> 
> > 	> > I strongly advice against using multis for vco
> > purpose, it is quite
> > 	> > frankly useless in my opinion. 
> > 	> 
> > 	> The only exception I make is when I occasionally
> > use a multiple to 
> > 	> split the pitch CV into raw and slew-limited
> > paths, and use an A150 
> > 	> VC switch patched to the A185 as a portamento
> > control.
> > 	> 
> > 	> This seems to work fine, and it's useful when the
> > A190 portamento 
> > 	> function won't do - when I need the A170's dual
> > rate 
> > 	> controls, or when 
> > 	> I'm controlling the A100 directly from my midi
> > keyboard, 
> > 	> which doesn't 
> > 	> have a Controller #65 capability.
> > 	> 
> > 	> Joe
> > 	
> > 	
> > 	
> > 	
> > Yahoo! Groups Sponsor	
> > 
> >
> 
<http://us.a1.yimg.com/us.yimg.com/a/le/lensexpress/lensexpress_468x60
b.gif>
> > 
> > Click here to find your contact lenses!
> >
> 
<http://rd.yahoo.com/M=225674.2075965.3644786.1829184/D=egroupweb/S=17
05032144:HM/A=1153174/R=7/*http://www.lensexpress.com>

> > 
> > 
> > 	To unsubscribe from this group, send an email to:
> > 	doepfer_a100-unsubscribe@y...
> > 	
> > 	
> > 	
> > 	Your use of Yahoo! Groups is subject to the Yahoo!
> > Terms of Service <http://docs.yahoo.com/info/terms/>
> > . 
> > 	
> > 
> > 
> > 
> >
> --------------------------------------------------------------
> > --
> >         Visit our Internet site at
> > http://www.reuters.com
> > 
> > Any views expressed in this message are those of 
> > the  individual
> > sender,  except  where  the sender specifically
> > states them to be
> > the views of Reuters Ltd.
> > 
> > 
> > [Non-text portions of this message have been
> > removed]
> > 
> > 
> 
> 
> =====
> synthfreak(parallel worlds)
> athens-greece
> [Doepfer_a100] group owner-moderator
> 
> __________________________________________________
> Do You Yahoo!?
> HotJobs - Search Thousands of New Jobs
> http://www.hotjobs.com