RE: [Doepfer_a100] Re: Slighty OT (again): Analogue Systems ADSR mods
2002-09-12 by David Salter
Hi there Zameer, I know your question wasn't for me but I'll provide an answer anyway as I have an equally large system of different euro modules. What is needed is a good quality LINEAR (not switch mode) power supply providing +/- 12V with sufficient ampage to support your total module set (and planned expansion). These can be purchased from many suppliers, mine was from an UK based company http://www.amplicon.co.uk <http://www.amplicon.co.uk> Mine is (well there are two actually) 1.7A open frame Bentron S series supplies, and I am very happy with them. All that is necessary is to connect the -12/+12 and ground to a bus board ( I use the Doepfer ones and for the Analogue systems modules made one out of a strip of Vero board. Hope that helps Regards David Salter Reuters Consulting Tel: +44 20 7542 2402 Mob: +44 7990562402 Fax: +44 20 7542 2699
Show quoted textHide quoted text
-----Original Message-----
From: flamey101 [mailto:flame101@planet.nl]
Sent: 11 September 2002 23:43
To: Doepfer_a100@yahoogroups.com
Subject: [Doepfer_a100] Re: Slighty OT (again): Analogue Systems ADSR mods
I have one queation to you, Peter, since you have a bunch of
different euro-modules in your systems..
My current setup (a reeeaaal small one compared to yuors) cosists of:
An AS Filter, Osc, Doepfer amp, controls, etc.. isn't important to my
question actually.
I have a Analogue Solutions Power supply board, on which I can plug 2
ASys modules into (the Osc and the filter). I do want to expand my
system with a frequency-to-voltage Asys thingie and add an extra
filter and Osc, maybe an extra Osc ass a waveshaper LFO. Or could I
get the same results with a slew limiter(?). So, what I was
wondering, how did you supply the volts to your AS modules?
Did you built connectors/or cables yourself (hopefully)?
Greets, Zameer
--- In Doepfer_a100@y..., "(i think you can figure that out)"
<petergrenader@h...> wrote:
> Sorry for this interesting, but slightly off-topic posting:
>
> for those of you interested in the mods I did on my Analogue
> Systems ADSR, go to:
>
> http://www.allegrobikes.com/franken.html
>
> and click on the the link 'modifications' in the first paragraph of
> descriptive text on the expansion panel.
Yahoo! Groups Sponsor
ADVERTISEMENT
<http://rd.yahoo.com/M=226671.2265556.3698777.2225242/D=egroupweb/S=1705032144:HM/A=1201365/R=0/*http://shop.store.yahoo.com/cgi-bin/clink?sharperimage-best+KFTN2Y:dmad/M=226671.2265556.3698777.2225242/D=egroupweb/S=1705032144:HM/A=1201365/R=1/1031784173+si637.html>
<http://us.adserver.yahoo.com/l?M=226671.2265556.3698777.2225242/D=egroupmail/S=:HM/A=1201365/rand=448695315>
To unsubscribe from this group, send an email to:
doepfer_a100-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
------------------------------------------------------------- ---
Visit our Internet site at http://www.reuters.com
Any views expressed in this message are those of the individual
sender, except where the sender specifically states them to be
the views of Reuters Ltd.
[Non-text portions of this message have been removed]