Synth-DIY Yahoo! Groups Archives

Thread

Re: A-141

2013-03-31 by Syndromeda

Thanks Rich,
That's all I wanted to know, you were very helpfull.
Happy Easter,
Danny

--- In Doepfer_a100@yahoogroups.com, Richard Horsman <richyho@...> wrote:

Show quoted textHide quoted text

>
> "The A-141 has a ten pin ribbon connector which doesn't allow for +5v,
> CV or Gate signals from the system." -
> http://www.analoguehaven.com/usercomm/diy/
> 
> This page also gives info on how to DIY a solution for this limitation.
> 
> Cheers
> 
> Rich
> 
> 
> 
> 
> 
> 
> 
> Hi,
> Can someone tell me if the A-141 VCADSR has Gate and CV connections
> with the busboard.
> TIA,
> Danny
>

Re: A-141

2013-03-31 by Richard Horsman

"The A-141 has a ten pin ribbon connector which doesn't allow for +5v,
CV or Gate signals from the system." -
http://www.analoguehaven.com/usercomm/diy/

This page also gives info on how to DIY a solution for this limitation.

Cheers

Rich







Hi,
Can someone tell me if the A-141 VCADSR has Gate and CV connections
with the busboard.
TIA,
Danny

Re: [Doepfer_a100] Re: A-141

2013-03-31 by Florian Anwander

Hello Richard,

I am sorry, but I have to correct you. The ten pin connectors transport 
only the supply voltages (+12V, Ground, -12V). For +5/Gate/CV you'd need 
a 16 pin connector in the Doepfer norm.

Also the service manual of the A-141 says, that there is no Gate or CV 
connection from the bus.

Florian

Show quoted textHide quoted text

On 31.03.13 11:55 , Richard Horsman wrote:
> "The A-141 has a ten pin ribbon connector which doesn't allow for +5v,
> CV or Gate signals from the system." -
> http://www.analoguehaven.com/usercomm/diy/
>
> This page also gives info on how to DIY a solution for this limitation.
>
> Cheers
>
> Rich
>
>
>
>
>
>
>
> Hi,
> Can someone tell me if the A-141 VCADSR has Gate and CV connections
> with the busboard.
> TIA,
> Danny
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

Re: [Doepfer_a100] Re: A-141

2013-03-31 by Richard Horsman

That's what I said Florian. It has a 10-pin connector, not 16-pin so
no link to the bus.

Rich

Show quoted textHide quoted text

On 31 March 2013 16:53, Florian Anwander <fanwander@mnet-online.de> wrote:
> Hello Richard,
>
> I am sorry, but I have to correct you. The ten pin connectors transport only
> the supply voltages (+12V, Ground, -12V). For +5/Gate/CV you'd need a 16 pin
> connector in the Doepfer norm.
>
> Also the service manual of the A-141 says, that there is no Gate or CV
> connection from the bus.
>
> Florian
>
> On 31.03.13 11:55 , Richard Horsman wrote:
>>
>> "The A-141 has a ten pin ribbon connector which doesn't allow for +5v,
>> CV or Gate signals from the system." -
>> http://www.analoguehaven.com/usercomm/diy/
>>
>> This page also gives info on how to DIY a solution for this limitation.
>>
>> Cheers
>>
>> Rich
>>
>>
>>
>>
>>
>>
>>
>> Hi,
>> Can someone tell me if the A-141 VCADSR has Gate and CV connections
>> with the busboard.
>> TIA,
>> Danny
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>