Doepfer

> HI there I want to mix some signals in my matrix,
>
> I have a frostwave resonator pedal that outputs 15V
>
> I was wondering if I can put it in the a-138m and what kind of voltage would I expect out in that case?

Voltages beyond -12V and +12V may damage the module ! Please do not apply 15V voltages. A passive attenuator (e.g. A-183-1) may
solve the problem but you have to pay attention not to increase the attenuator control by mistake.

Best wishes
Dieter Doepfer

I doubt the Frostwave puts out 15v, how did you measure this?
  IT'S a PEDAL!! likely a bit low for modular. even it's CV range is 0-10v

On 2/23/16 10:29 AM, yahoo@doepfer.de [Doepfer_a100] wrote:
>> HI there I want to mix some signals in my matrix,
>>
>> I have a frostwave resonator pedal that outputs 15V
>>
>> I was wondering if I can put it in the a-138m and what kind of voltage would I expect out in that case?
> Voltages beyond -12V and +12V may damage the module ! Please do not apply 15V voltages. A passive attenuator (e.g. A-183-1) may
> solve the problem but you have to pay attention not to increase the attenuator control by mistake.
>
> Best wishes
> Dieter Doepfer
>
>
>
> ------------------------------------
>
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>
>

Hey thanks, did not try to measure but it gets 15 V so I thought that was the output as well. i'll check when home
 || | | ||| |  ||  || | ||||| || | || | ||| | ||||| | | ||| | |||| |  || ||||
 
ALBERTO NOVELLO / JesterN
site: jestern.com
shop: jestern.bandcamp.com
audio: soundcloud.com/jestern
video: vimeo.com/jestern
 
|| | | ||| |  ||  || | ||||| || | || | ||| | ||||| | | ||| | |||| |  || ||||

If for any reason you wish not to receive any more messages from this email, please send an email with REMOVE as subject. I'm sorry for the inconvenience. 
Se per qualsiasi ragione non desideri ricevere piu' messaggi da questo indirizzo, mandami un messaggio con REMOVE nel soggetto. Mi scuso per il disturbo.


      Da: "'p. hendricks' ph@comcast.net [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
 A: Doepfer_a100@yahoogroups.com 
 Inviato: Mercoledì 24 Febbraio 2016 6:15
 Oggetto: Re: AW: [Doepfer_a100] max V input for a-138m
   
I doubt the Frostwave puts out 15v, how did you measure this?
  IT'S a PEDAL!! likely a bit low for modular. even it's CV range is 0-10v


On 2/23/16 10:29 AM, yahoo@doepfer.de [Doepfer_a100] wrote:
>> HI there I want to mix some signals in my matrix,
>>
>> I have a frostwave resonator pedal that outputs 15V
>>
>> I was wondering if I can put it in the a-138m and what kind of voltage would I expect out in that case?
> Voltages beyond -12V and +12V may damage the module ! Please do not apply 15V voltages. A passive attenuator (e.g. A-183-1) may
> solve the problem but you have to pay attention not to increase the attenuator control by mistake.
>
> Best wishes
> Dieter Doepfer
>
>
>
> ------------------------------------
>
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>
>



------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links