Synth-DIY Yahoo! Groups Archives

Add a reset to the A150

2017-08-19 by rayzermatic@yahoo.com

Does anyone know how I might be able to add a 'reset' to my new A150 switch. I am not opposed to filing a slot in the bottom of the module and adding a reset wire due to real estate issues. I have a 16 position passive multiple that all the resets of my modules patched to so when i apply a signal from a push button, it resets all my modules. I just received my new a150 would like to add a reset to it.

Can anybody help?

Thanks

Re: [Doepfer_a100] Add a reset to the A150

2017-08-19 by Jacco Ville

Hi, there is no reset needed. 
This switch isn't latched. 
Read the manual. 
It just switches when the input receives a voltage from about 3.6V. 
When the voltages drops below that point it will fall back to its first state.
So a reset will not work on this module I guess.

You'll need the A151 seq switch which   
offers a reset possibility. 

Best regards

Jacco Ville



Sent from my IPhone.

Show quoted textHide quoted text

> Op 19 aug. 2017 om 23:42 heeft rayzermatic@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> het volgende geschreven:
> 
> Does anyone know how I might be able to add a 'reset' to my new A150 switch. I am not opposed to filing a slot in the bottom of the module and adding a reset wire due to real estate issues. I have a 16 position passive multiple that all the resets of my modules patched to so when i apply a signal from a push button, it resets all my modules. I just received my new a150 would like to add a reset to it.
> 
> Can anybody help?
> 
> Thanks
> 
>