Doepfer

In a message dated 5/1/2003 6:52:54 AM Eastern Daylight Time, 
andreas.k.lindholm@telia.com writes:


> looking into
> surround encoding. 



andreas,
sorry, i can`t help about the issue of "encoding" but you might try putting 
some tracks on a dvd and checking the playback.  my normal monitoring system 
( stereo in / 5x1 out ) is a jbl pro-logic surround sound system an, from 
what i was told, phase relationships are what this keys on.  well, most synth 
modifications affect the phase relationship of the signal and i`ve found that 
i get a fair amount of "depth" and "motion"  during normal monitoring of the 
synth.  hope this is of some help !
best,
dave




[Non-text portions of this message have been removed]

Helps? None at all actually ;)  I have total control over the surround
encoding if from a five sample source. So that is not the issue. But the
synths need to be able to ouptput five channels of audio mixes and the only
one I can expand that way is the A100. It would take three VCpanners, five
VCAs, and Lowpass(for the subchannel mix) as far as I can tell. The morphing
module seems a bit resticted as far as I can make out, but perhaps I am
wrong.

Anybody tried this?


----- Original Message ----- 
From: <davevosh@aol.com>
To: <Doepfer_a100@yahoogroups.com>
Sent: Thursday, May 01, 2003 10:36 PM
Subject: Re: [Doepfer_a100] Surround mxing on A100


> In a message dated 5/1/2003 6:52:54 AM Eastern Daylight Time,
> andreas.k.lindholm@telia.com writes:
>
>
> > looking into
> > surround encoding.
>
>
>
> andreas,
> sorry, i can`t help about the issue of "encoding" but you might try
putting
> some tracks on a dvd and checking the playback.  my normal monitoring
system
> ( stereo in / 5x1 out ) is a jbl pro-logic surround sound system an, from
> what i was told, phase relationships are what this keys on.  well, most
synth
> modifications affect the phase relationship of the signal and i`ve found
that
> i get a fair amount of "depth" and "motion"  during normal monitoring of
the

> synth.  hope this is of some help !
> best,
> dave
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To unsubscribe from this group, send an email to:
> doepfer_a100-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>