Re: info from doepfer about the development of the A107 and the A154.
2003-06-10 by selfoscillate
hello, yes i would also prefer a switch instead of a jumper. as we can see with the a127, users start adding those switches, because jumpers are not practical. regarding the a154, i think most people who vote here always want the solution with a maximum of possible features. my personal opinion is, that this is not a bad thing. it will give more possibilities, even if these possibilities are rarely used in the end. best wishes ingo --- In Doepfer_a100@yahoogroups.com, David Salter <david.salter@r...> wrote: > Bakis > > Two thoughts; > > Is there another forum that Dieter gets feedback from? > > If there is going to be a jumper to change osc modes on the A154, why > not install a switch (apart from a little extra cost) then it's more > flexible. > > Regards > > > > David Salter > > Tel: +44 20 7542 2402 > Mob: +44 7990562402 > Fax: +44 20 7542 2699 > > -----Original Message----- > From: Bakis Sirros [mailto:synth_freak_2000@y...] > Sent: 10 June 2003 13:21 > To: Doepfer_a100 group > Subject: [Doepfer_a100] info from doepfer about the development > of the A107 and the A154. > > > DOEPFER SAYS: > "we still have some (minor) problems with the A-107 > (not with the module generally but with the slew > limiting function). The pure hardware slew limiter is > working now but now the disadvantage is that there is > no display if the module is still morphing to the new > filter or if the new filter is already reached. As > long as the slew function was under software control > the microcontroller "knew" if the slew/morphing had > been finished. So we will try another way: combined > soft/hardware slew limiting, i.e. the software has the > main control over the slew function and the additional > VC hardware slew limiter only irons out the small > steps caused because of the 8 bit resolution of the > DAC that is used for the VCA control. I will keep you > informed about the proceedings. > Consequently I cannot confirm that the A-107 will be > available in August as we still have to find the final > solution for the 100% smooth slew function with > display. As soon as we have tested the combined > soft/hardware slew function I can tell you more. > > Thanks for the poll results. The SOU result was not > very surprising. But the VC first/last step for the > A-154 was really unexpected as it differs completely > from the suggestions of other A-100 users (not members > of the Yahoo group). Most of these users suggested > answer b (only VC last step in all non CV addressed > modes) but no d (2 additonal CV inputs). We will > discuss in the company the results and see if we > really add the additional CV inputs for first/last > step. If we would have only the response from the > Yahoo group there would be no question and we would > simply add the CV inputs. > For the oscillator mode we think about another > solution: a jumper on the pc board so that the user > could select between the two versions. > > Best wishes > Dieter Doepfer" > > > > SO...MEMBERS, KEEP ON VOTING FOR THE SOU MODULES AND > THE A154!!!:-) > BAKIS. > > > > ===== > synthfreak(parallel worlds) > athens-greece > [Doepfer_a100] group owner > > __________________________________ > Do you Yahoo!? > Yahoo! Calendar - Free online calendar with sync to Outlook (TM). > http://calendar.yahoo.com > > > Yahoo! Groups Sponsor > > > <http://rd.yahoo.com/M=247865.3355058.4641699.1261774/D=egroupweb/S=17 05 > 032144:HM/A=1482387/R=0/SIG=16nu6799b/*http://ads.x10.com/? bHlhaG9vaG0xL > mRhd=1055247680% 3eM=247865.3355058.4641699.1261774/D=egroupweb/S=1705032 > 144:HM/A=1482387/R=1=1055247680% 3eM=247865.3355058.4641699.1261774/D=egr > oupweb/S=1705032144:HM/A=1482387/R=2> > > <http://us.adserver.yahoo.com/l? M=247865.3355058.4641699.1261774/D=egrou > pmail/S=:HM/A=1482387/rand=280600123> > > To unsubscribe from this group, send an email to: > doepfer_a100-unsubscribe@yahoogroups.com > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of > Service <http://docs.yahoo.com/info/terms/> . > > > > > --------------------------------------------------------------- - > Visit our Internet site at http://www.reuters.com > > Get closer to the financial markets with Reuters Messaging - for more
Show quoted textHide quoted text
> information and to register, visit http://www.reuters.com/messaging > > Any views expressed in this message are those of the individual > sender, except where the sender specifically states them to be > the views of Reuters Ltd. > > > > [Non-text portions of this message have been removed]