Re: [Doepfer_a100] New poll for Doepfer_a100
2002-01-10 by david.salter@reuters.com
What might be nice is to be able to tune each key/sensor so setting up micro tonal stuff would be easy.
David
Florian Anwander
<Florian.Anwander@ To: Doepfer_a100@yahoogroups.com
consol.de> cc:
Sent by: Subject: Re: [Doepfer_a100] New poll for Doepfer_a100
Florian.Anwander@c Header: Internal Use Only
onsol.de
10/01/2002 14:49
Please respond to
Doepfer_a100
Hi
> o polyphony(4voices)
> o polyphony(8voices)
I urgently need also a monophonic keyboard. I hope this is included
self-evidently.
> o aftertouch
For the corresponding output we should have several modes:
1.) "hold" - after releasing the sensor, the output
holds a voltage that corresponds to the level
of the last N milliseconds.
2.) "real" - after releasing the sensor (=no pressure
on the pad), the output also gives no voltage.
3.) "velocity" - when I hit the sensor the output holds the value
of the first N milliseconds (this gives velocity instead of
key pressure).
4.) "gated velocity" - when I hit the sensor the output holds the value
of the first N milliseconds. After releasing the sensor the output
returns to 0 Volt (This is useful for dynamic drum electronics).
> o digital sequencer
> o analog sequencer
I do not understand. What should mean "analogue" sequencer? To me this is a
sequencer with knobs to set the tuning. A sequencer inside a keyboard
always
will be "digital" since it gets the tuning info from the keys.
The question is, should it record the velocity or not?
I prefer simple sequencers. To my humble opinien the perfect sequencer is
the one in the Roland SH-101 or JX-3P.
Additionally I'd appreciate some Arpeggiopatterns
Florian
--
Florian Anwander |ConSol* HP-Support
Tel. +49.89.45841-133 |Consulting&Solutions Software GmbH
Fax +49.89.45841-139 |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de
Yahoo! Groups Sponsor
ADVERTISEMENT
To unsubscribe from this group, send an email to:
doepfer_a100-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------------------------------------------------------------- ---
Visit our Internet site at http://www.reuters.com
Any views expressed in this message are those of the individual
sender, except where the sender specifically states them to be
the views of Reuters Ltd.