RE: [Doepfer_a100] Ribbon controller
2002-01-21 by david.salter@reuters.com
Tris,
Go to
http://groups.yahoo.com/group/Doepfer_a100/polls
I still can not make up my mind if I will go poly with the modular. I might prefer a VA system, i.e. Nord, Reactor or Creamware. More cost effective and still modular. Nothing could replace a real, tactile modular though. Far too much fun.
David
thepeak
<thepeak@btint To: Doepfer_a100@yahoogroups.com
ernet.com> cc: Show quoted textHide quoted text
Subject: RE: [Doepfer_a100] Ribbon controller
21/01/2002 Header: Internal Use Only
15:42
Please respond
to
Doepfer_a100
Hello again
I was just thinking and well where do we vote for new modules etc? Also
would people be interested in a poly-oscillator, Everything else in the
doepfer range allows for a poly working system but the tuning of let's say a
minimum 8 oscillators makes it very difficult. So if it where achievable to
chain the oscillators and use lets say global tuning, this would simplify
and stabalise the system. As all of our systems continue to grow I'd
imagine we all dream of an open-ended system such as doepfer, which can be
played polyphonically with real analogue oscillators.
Regards
TJ
-----Original Message-----
From: thepeak [mailto:thepeak@btinternet.com]
Sent: Monday, January 21, 2002 3:17 PM
To: Doepfer_a100@yahoogroups.com
Subject: RE: [Doepfer_a100] Ribbon controller
Hi David' and others
I use the kurzweil ribbon controller with partial use of the mcv24, it makes
an excellent instrument on it's own as well as with sequencer and/or
keyboard.
It has an enormous amount of playing potential and a locking arpegiator to
boot?
Regards
TJ
-----Original Message-----
From: d_salteruk [mailto:david.salter@reuters.com]
Sent: Monday, January 21, 2002 2:50 PM
To: Doepfer_a100@yahoogroups.com
Subject: [Doepfer_a100] Ribbon controller
Hi Bakis & everyone else.
I was wondering if there has been any feedback from from Dieter on
this one.
Looking at the Kurzweil unit
( http://www.kurzweilmusicsystems.com/html/expmate.html)
as a general guide (forget pedal and breath inputs), the length is
about right and if it had a range switch, say 1V - 5V and a fine tune
pot and outputs for CV, gate and pressure (maybe a pressure
sensitivity pot as well)it would make a realy nice controller.
Just curious.
Regards
David
To unsubscribe from this group, send an email to:
doepfer_a100-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
< http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
To unsubscribe from this group, send an email to:
doepfer_a100-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .
[Non-text portions of this message have been removed]
To unsubscribe from this group, send an email to:
doepfer_a100-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
-------------------------------------------------------------- --
Visit our Internet site at http://www.reuters.com
Any views expressed in this message are those of the individual
sender, except where the sender specifically states them to be
the views of Reuters Ltd.