Patches and discussion for Ensoniq VFX family

Why not just buy a cheap label maker ($20 after rebate) at an office 
supply store and print out labels?  I know it might look cheesy, but 
it would be much cheaper than having a company do it.  Or, another 
idea is to buy clear Avery labels for your printer, and print it 
out - most ink jets can't print white, but you could print it in 
yellow or some other light color.  I would put a second layer of the 
Avery labels on so you can't rub off the ink jet ink.

OR you could buy a VFX for parts (if there is such a thing and you 
can find it) and replace the top.

Heck, you can even buy a white paint pen, and write it on.  Or if 
you want to go all out, use your wife or girlfriend's nail polish :~)

Good luck, 
Scott

--- In Ensoniq-VFX-SD@yahoogroups.com, "keyman_88" <macaddik@e...> 
wrote:
> Hi all,
> Is there anyone or  any comapny that has or can do stencil or rub 
> ons for the lettering on the top panel of the VFX/sd?
> I bought a used VFXSD dirt cheap with almost no lettering o nthe 
> panel.
> 
> Also Any help on copying an effect from a bank to the sequencer 
> section on the VFX/sd? "Fusion Kit sounds good but noe when I 
select 
> it in the Sequencer. It is dry as with all my othe sounds.
> How do I copy the effects from banks to Sequnces?
> 
> Thanks
> 
> Happy Holidays!