Hi Ensoniq Fans!
I want to trigger a drum sequence in my SD-1
from my VFXSD. ( I use my VFXSD to control all my keyboards because it has
the sequencer expander installed. ) What settings do I need to make in the
SD-1? In the VFXSD manual I am looking at Section
13
---- Sequencer Applications pages 13
- 5 & 13 - 6 Using the VFXSD with an External MIDI
Sequencer
On page 13 - 6: it says: "When using
the VFXSD as both the controller and one of several sound generators with an
external sequencer: * Set up the MIDI connections as shown in the
diagram on the previous page. ( I did that )
* Set the external sequencer to echo incoming MIDI data at its output. (
So how do I set the SD-1 to " echo incoming MIDI data at its output"
? I consulted the SD-1 manual but it is word for word the same
as the VFXSD manual. ) Am I even looking at the correct set of
instructions? Have any of you tried to do this? I sure do want to use this
drum pattern. Hope someone can tell me how to proceed.
Thanks for any help you can give
me.
Sandy Lane