Patches and discussion for Ensoniq VFX family

Sounds like you may have an SD1 with the keyboard connection problem. 
Turn it off then try pressing the keyboard down in the middle around 
middle C. Then turn The SD1 back on and see if it makes a differance. 
it works for some people, if it does then you need to hard wire the
two 
bords together. DO NOT keep on turning it on and off as this WILL
KILL 
the diodes.




--- In Ensoniq-VFX-SD@yahoogroups.com, "tjiyf" <tjiyf@h...> wrote:
> I have a recurring problem on my Sd1, about 30% of the time when i 
> power up the keyboard does not get to the calibation notice so the 
> keyboard is not usable. I continue to switch the power on and off 
> somtimes up to 100 times before the keyboard will initilize.
> I then have to releod the O.S system and sounds etc. 
> Is there any thing i can do to prevent this.
> 
> Tony.