Hi, Dave
True. The pedal needs to have TWO sets of contacts, since the normal polarity switched ones only switch the wires.
-----Original Message-----
From: vidmic@...
Sent: Saturday, March 1, 2008 5:22 PM -08:00
To: Ensoniq-VFX-SD@yahoogroups.com
Subject: [Ensoniq-VFX-SD] Sustain pedal for the SD-1
Hi,
If you have a manual, it should tell you which way the
switch it supposed to be, but I recall that not every
stock pedal will work with the ensoniq line for this
very reason.
Dave
--- Claus wrote:
> As I remember, the pedal(s) need to be On=OPEN
> contact. So getting one with a switch to reverse
> action, might be a nice thing, if You want to use it
> on other keybords (that don't have a software
> pedal-polarity-switch)
>
>
>
> -----Original Message-----
> From: antonfarstad@...
> Sent: Wednesday, February 20, 2008 9:07 PM -08:00
> To: Ensoniq-VFX-SD@yahoogroups.com
> Subject: [Ensoniq-VFX-SD] Sustain pedal for the SD-1
>
> Hi guys.
>
> I tried to plug my sustain pedal into the SD-1 but
> it doesnt work. I
> just bought the thing at a music store so I dont
> think there is
> anything wrong with the pedal itself.
>
> Any ideas?
>
>
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ