Patches and discussion for Ensoniq VFX family

Then You Probably have to adjust the "Master Velocity Maximum". This is 
also in the Master settings.

Press "Master" and you will see where you adjust the Touch, as you have.

Press "Master" another 3 times. (There are 5 master screens rotating on 
mine, and this is on the fourth of the five screens, although that may 
differ between models.)

On that fourth Master Screen, One Setting Says "Master - Vel - Maximum = 
127". 

If your velocity is any lower, you need to set it to "127". What ever 
yours is set to, it is limiting your velocity, so anything above that 
level does not get sent to the Sound Module.

I Hope This Helps

Ralph :-)




jim_henry_esq wrote:

> Nathan and Ralph, thanks for responding.  I do know about the touch
> settings.  Even on the lightest setting, pounding on the keys will
> only produce a velocity of about 90. A reasonably hard key strike is
> closer to 70.  Does anyone know if this is normal or does it indicate
> that some service is required?  It does seem like the touch might be
> reasonable for the VFXs own voices.  It is just the MIDI output that
> seems not to provide velocity information that is high enough for
> external synths.
>
> Thanks,
> Jim Henry
>