Patches and discussion for Ensoniq VFX family group photo

Yahoo Groups archive

Patches and discussion for Ensoniq VFX family

Index last updated: 2026-04-29 00:03 UTC

Thread

Sv:Re: Sv:Re: [Ensoniq-VFX-SD] Saying Hello and ...

Sv:Re: Sv:Re: [Ensoniq-VFX-SD] Saying Hello and ...

2005-10-30 by Claus Christiansen

OK, one last thing then - it\ufffds 2x60 sounds, isn\ufffdt it?



> Fra: tim sullivan
> Til: Ensoniq-VFX-SD@yahoogroups.com
> Emne: Re: Sv:Re: [Ensoniq-VFX-SD] Saying Hello and ...
> Dato: Fri, 28 Oct 2005 22:44:59 -0400

actually i think theyre called eeprom , but yes its a memory
cartridge for the vfx
with a switch on it
80 different built in sounds on each side

tim sullivan
timsullivan@...
www.digitraxs.com

On Oct 28, 2005, at 9:17 PM, Claus Christiansen wrote:

> With dual voice crystal eProm, do U mean a Memory Cartridge?
>
>
> > Fra: tim sullivan
> > Til: Ensoniq-VFX-SD@yahoogroups.com
> > Emne: Re: [Ensoniq-VFX-SD] Saying Hello and ...
> > Dato: Fri, 28 Oct 2005 20:38:32 -0400
>
> possibly gonna sell my vfx-sd soon ,
> just considering the alternatives for what i do (studio work)
>
> one owner , perfect condition , with dual voice crystal eprom
> (160sounds)
> not a thing wrong with any of it , just ready to move onward
> would ask for whatever the fair ebay values have been (when im ready)
& gt;
> i live in RI - 02893
>
>
> On Oct 28, 2005, at 6:36 PM, JDM Zangari wrote:
>
>> All,
>>
>> New to this group. Let me introduce myself. Joe Zangari here.
>>
>> I've had an SD-1 32 for , well, since they came out. Around '91 or
>> '92. Anyway, play various types of music with groups or not. Live
>> environments only, no sequencing. Never had time to learn but wish
>> I had. Just seemed complicated. Also play a few other instruments
>> (mountain dulcimer, bowed psaltry, chapman stick, a few others.)
>> So, glad to meet all that have a commonality with the VFX family.
>> Hope I can contribute.
>>
>> I am also looking for a backup to my SD. VFX-SD, VFX-SDII, SD-1 or
>> SD-1/32. If anyone has one they are not using and could bear to
>> part with let me know. I'm looking to buy.
>>
>> Also, I live in eastern central PA, If any members are in the area
>> and would like to setup a network to "loan"instruments in the
>> event of a performance emergancy, let me know, I don't use mine
>> that often on weekends.
>>
>> So, Hello ...
>>
>> Joe
>>
>>
>> To unsubscribe from this group, send an email to:
>> Ensoniq-VFX-SD-unsubscribe@yahoogroups.com
>>
>> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>>
>>
>>
>> YAHOO! GROUPS LINKS
>>
>> Visit your group "Ensoniq-VFX-SD" on the web.
>>
>> To unsubscribe from this group, send an email to:
>> Ensoniq-VFX-SD-unsubscribe@yahoogroups.com
>>
>> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>>
>>
>
>
>
>
> YAHOO! GROUPS LINKS
>
> Visit your group "Ensoniq-VFX-SD" on the web.
>
> To unsubscribe from this group, send an email to:
> Ensoniq-VFX-SD-unsubscribe@yahoogroups.com
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>

Re: Sv:Re: Sv:Re: [Ensoniq-VFX-SD] Saying Hello and ...

2005-10-31 by tim sullivan

oops yes 2x60

tim sullivan
timsullivan@...
www.digitraxs.com
Show quoted textHide quoted text
On Oct 30, 2005, at 4:27 PM, Claus Christiansen wrote:


> OK, one last thing then - it´s 2x60 sounds, isn´t it?
>
>
>
> > Fra: tim sullivan <timsullivan@mac.com>
> > Til: Ensoniq-VFX-SD@yahoogroups.com
> > Emne: Re: Sv:Re: [Ensoniq-VFX-SD] Saying Hello and ...
> > Dato: Fri, 28 Oct 2005 22:44:59 -0400
>
> actually i think theyre called eeprom  , but yes its a memory
> cartridge for the vfx
> with a switch on it
> 80 different built in sounds on each side
>
> tim sullivan
> timsullivan@...
> www.digitraxs.com
>
> On Oct 28, 2005, at 9:17 PM, Claus Christiansen wrote:
>
> > With dual voice crystal eProm, do U mean a Memory Cartridge?
> >
> >
> > > Fra: tim sullivan <timsullivan@...>
> > > Til: Ensoniq-VFX-SD@yahoogroups.com
> > > Emne: Re: [Ensoniq-VFX-SD] Saying Hello and ...
> > > Dato: Fri, 28 Oct 2005 20:38:32 -0400
> >
> > possibly gonna sell my vfx-sd soon ,
> > just considering the alternatives for what i do (studio work)
> >
> > one owner , perfect condition , with dual voice crystal eprom
> > (160sounds)
> > not a thing wrong with any of it , just ready to move onward
> > would ask for whatever the fair ebay values have been (when im  
> ready)
> & gt;
> > i live in RI  - 02893
> >
> >
> > On Oct 28, 2005, at 6:36 PM, JDM Zangari wrote:
> >
> >> All,
> >>
> >> New to this group. Let me introduce myself. Joe Zangari here.
> >>
> >> I've had an SD-1 32 for , well, since they came out. Around '91 or
> >> '92. Anyway, play various types of music with groups or not. Live
> >> environments only, no sequencing. Never had time to learn but wish
> >> I had. Just seemed complicated.  Also play a few other instruments
> >> (mountain dulcimer, bowed psaltry, chapman stick, a few others.)
> >> So, glad to meet all that have a commonality with the VFX family.
> >> Hope I can contribute.
> >>
> >> I am also looking for a backup to my SD. VFX-SD, VFX-SDII, SD-1 or
> >> SD-1/32. If anyone has one they are not using and could bear to
> >> part with let me know. I'm looking to buy.
> >>
> >> Also, I live in eastern central PA, If any members are in the area
> >> and would like to setup a network to "loan"instruments in the
> >> event of a performance emergancy, let me know, I don't use mine
> >> that often on weekends.
> >>
> >> So,  Hello ...
> >>
> >> Joe
> >>
> >>
> >>  To unsubscribe from this group, send an email to:
> >>  Ensoniq-VFX-SD-unsubscribe@yahoogroups.com
> >>
> >>  Your use of Yahoo! Groups is subject to the Yahoo! Terms of  
> Service.
> >>
> >>
> >>
> >> YAHOO! GROUPS LINKS
> >>
> >>  Visit your group "Ensoniq-VFX-SD" on the web.
> >>
> >>  To unsubscribe from this group, send an email to:
> >>  Ensoniq-VFX-SD-unsubscribe@yahoogroups.com
> >>
> >>  Your use of Yahoo! Groups is subject to the Yahoo! Terms of  
> Service.
> >>
> >>
> >
> >
> >
> >
> > YAHOO! GROUPS LINKS
> >
> >  Visit your group "Ensoniq-VFX-SD" on the web.
> >
> >  To unsubscribe from this group, send an email to:
> >  Ensoniq-VFX-SD-unsubscribe@yahoogroups.com
> >
> >  Your use of Yahoo! Groups is subject to the Yahoo! Terms of  
> Service.
> >
> >
>
>
>
>
> YAHOO! GROUPS LINKS
>
>  Visit your group "Ensoniq-VFX-SD" on the web.
>
>  To unsubscribe from this group, send an email to:
>  Ensoniq-VFX-SD-unsubscribe@yahoogroups.com
>
>  Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>

Sv:Re: Sv:Re: [Ensoniq-VFX-SD] Saying Hello and ...

2005-11-01 by Claus Christiansen

What about Dynacord, can U get that in the states, \ufffdcaus they make some brilliant longlasting Mix/Amp/2xFX machines. They are pretty nice. Here is a link: http://www.dynacord.de/unterkategorie.php?id=56&subid=106

Roland makes some Keykombos with speakers, but I don\ufffdt think they are big enough...

> Fra: "JDM Zangari"
> Til:
> Emne: Re: Sv:Re: [Ensoniq-VFX-SD] Saying Hello and ...
> Dato: Sun, 30 Oct 2005 21:03:03 -0500

I still have the crown system (just for my keyboards ) in our practice room but it gets a bit heavy carring out. Three systems:
Our "mains" JBL bins and uppers, board, amps, XF, compressor/ etc...
Our stage monitor system, amp rack/board, 4 JBL monitors
And, my keyboard system, Amp/ Board rack, speakers, three Keyboards, etc... and I'm pushin' 50 (years). Stuff is gettin heavier every year.
I thought I could eliminate my keyboard system with an all in one amp/mixer/speaker/effects unit (combo amp) and run my keys through the stage monitor system. Just use the speaker for my own ears.
And ...You're right, 300 watts ain't always the same as 300 watts.
----- Original Message -----
Sent: Sunday, October 30, 2005 4:33 PM
Subject: Sv:Re: [Ensoniq-VFX-SD] Saying Hello and ...

Welllll.... U should have sticked to your Crown Amp :)

I do a lot of soundgigs and haven\ufffdt actually found any small All-In-One-Packages that works good enough.

But a friend of mine talked about some nice small YAMAHA rigs that were pretty good.

(300 Watts is not always 300 Watts - is it in 4ohm or 8ohm - does the speakers match that and so forth.)



> Fra: "JDM Zangari"
> Til:
> Emne: Re: [Ensoniq-VFX-SD] Saying Hello and ...
> Dato: Fri, 28 Oct 2005 22:51:20 -0400

Tim,
When you're ready to part with it, let me know. Thanks,
All,
By the way, let's pick this braintrust some, I'm looking for a stage monitor, getting rid of my old sound system, (crown amp, two big celestron speakers, mixing board, rack, etc.) and replacing it with an all-in-one thiing. I picked up an Alesis Sumo 300, 300 watts, effects, 4 stereo inputs, not happy with it. Believe it or not, it's not loud enough for stage use, I was thinking about a Barbetta, saw a 31c on ebay, two 8" woofers, one 5" horn. Also saw a 22c, one 12 and one 7" horn. Any thoughts.
Joe
----- Original Message -----
Sent: Friday, October 28, 2005 8:38 PM
Subject: Re: [Ensoniq-VFX-SD] Saying Hello and ...

possibly gonna sell my vfx-sd soon ,
just considering the alternatives for what i do (studio work)

one owner , perfect condition , with dual voice crystal eprom (160sounds)
not a thing wrong with any of it , just ready to move onward
would ask for whatever the fair ebay values have been (when im ready)

i live in RI - 02893


On Oct 28, 2005, at 6:36 PM, JDM Zangari wrote:

All,
New to this group. Let me introduce myself. Joe Zangari here.
I've had an SD-1 32 for , well, since they came out. Around '91 or '92. Anyway, play various types of music with groups or not. Live environments only, no sequencing. Never had time to learn but wish I had. Just seemed complicated. Also play a few other instruments (mountain dulcimer, bowed psaltry, chapman stick, a few others.) So, glad to meet all that have a commonality with the VFX family. Hope I can contribute.
I am also looking for a backup to my SD. VFX-SD, VFX-SDII, SD-1 or SD-1/32. If anyone has one they are not using and could bear to part with let me know. I'm looking to buy.
Also, I live in eastern central PA, If any members are in the area and would like to setup a network to "loan"instruments in the event of a performance emergancy, let me know, I don't use mine that often on weekends.
So, Hello ...
Joe
To unsubscribe from this group, send an email to:
Ensoniq-VFX-SD-unsubscribe@yahoogroups.com



YAHOO! GROUPS LINKS





Sv:Re: Sv:Re: [Ensoniq-VFX-SD] Saying Hello and ...

2005-11-01 by Claus Christiansen

Ahhh.... Now I see! Sorrrrry!!!!




> Fra: mishon66@...
> Til: Ensoniq-VFX-SD@yahoogroups.com
> Emne: Re: Sv:Re: [Ensoniq-VFX-SD] Saying Hello and ...
> Dato: Mon, 31 Oct 2005 23:20:51 -0500

Please keep the posts on the VFXSD group related to the VFXSD line or I will have to remove you.
The moderator

-----Original Message-----
Show quoted textHide quoted text
From: JDM Zangari
To: Ensoniq-VFX-SD@yahoogroups.com
Sent: Sun, 30 Oct 2005 21:03:03 -0500
Subject: Re: Sv:Re: [Ensoniq-VFX-SD] Saying Hello and ...

I still have the crown system (just for my keyboards ) in our practice room but it gets a bit heavy carring out. Three systems:
Our "mains" JBL bins and uppers, board, amps, XF, compressor/ etc...
Our stage monitor system, amp rack/board, 4 JBL monitors
And, my keyboard system, Amp/ Board rack, speakers, three Keyboards, etc... and I'm pushin' 50 (years). Stuff is gettin heavier every year.
I thought I could eliminate my keyboard system with an all in one amp/mixer/speaker/effects unit (combo amp) and run my keys through the stage monitor system. Just use the speaker for my own ears.
And ...You're right, 300 watts ain't always the same as 300 watts.
----- Original Message -----
Sent: Sunday, October 30, 2005 4:33 PM
Subject: Sv:Re: [Ensoniq-VFX-SD] Saying Hello and ...

Welllll.... U should have sticked to your Crown Amp :)
I do a lot of soundgigs and haven\ufffdt actually found any small All-In-One-Packages that works good enough.
But a friend of mine talked about some nice small YAMAHA rigs that were pretty good.
(300 Watts is not always 300 Watts - is it in 4ohm or 8ohm - does the speakers match that and so forth.)



> Fra: "JDM Zangari"
> Til:
> Emne: Re: [Ensoniq-VFX-SD] Saying Hello and ...
> Dato: Fri, 28 Oct 2005 22:51:20 -0400

Tim,
When you're ready to part with it, let me know. Thanks,
All,
By the way, let's pick this braintrust some, I'm looking for a stage monitor, getting rid of my old sound system, (crown amp, two big celestron speakers, mixing board, rack, etc.) and replacing it with an all-in-one thiing. I picked up an Alesis Sumo 300, 300 watts, effects, 4 stereo inputs, not happy with it. Believe it or not, it's not loud enough for stage use, I was thinking about a Barbetta, saw a 31c on ebay, two 8" woofers, one 5" horn. Also saw a 22c, one 12 and one 7" horn. Any thoughts.
Joe
----- Original Message -----
Sent: Friday, October 28, 2005 8:38 PM
Subject: Re: [Ensoniq-VFX-SD] Saying Hello and ...

possibly gonna sell my vfx-sd soon ,
just considering the alternatives for what i do (studio work)

one owner , perfect condition , with dual voice crystal eprom (160sounds)
not a thing wrong with any of it , just ready to move onward
would ask for whatever the fair ebay values have been (when im ready)

i live in RI - 02893


On Oct 28, 2005, at 6:36 PM, JDM Zangari wrote:

All,
New to this group. Let me introduce myself. Joe Zangari here.
I've had an SD-1 32 for , well, since they came out. Around '91 or '92. Anyway, play various types of music with groups or not. Live environments only, no sequencing. Never had time to learn but wish I had. Just seemed complicated. Also play a few other instruments (mountain dulcimer, bowed psaltry, chapman stick, a few others.) So, glad to meet all that have a commonality with the VFX family. Hope I can contribute.
I am also looking for a backup to my SD. VFX-SD, VFX-SDII, SD-1 or SD-1/32. If anyone has one they are not using and could bear to part with let me know. I'm looking to buy.
Also, I live in eastern central PA, If any members are in the area and would like to setup a network to "loan"instruments in the event of a performance emergancy, let me know, I don't use mine that often on weekends.
So, Hello ...
Joe
To unsubscribe from this group, send an email to:
Ensoniq-VFX-SD-unsubscribe@yahoogroups.com



YAHOO! GROUPS LINKS






YAHOO! GROUPS LINKS



Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.