Yahoo Groups archive
Thread
2008-09-08 by familypro3
Hi, I not only have the recaliberation error problem but also any sound being played sounds as if the tuner is going slightly up and down. This only starts to happen after it warms up. Even if only controlling another sound via midi. Has anyone ever expierienced this problem before and does the recaliberation error fix also fix this? Thanks Paul
2008-09-08 by rhorton@hughes.net
My SD1 does this, temporary fix is exercising the pitch wheel (rock it back and forth rapidly for 5 minutes). Eventually I will replace the pot. I think it gets a 'flat spot' in the center. you can set the pitch bend range to zero to eliminate it also. I had recalibration error too, not related to the pitch issue.
�
Rich
Sep 8, 2008 04:19:47 PM, Ensoniq-VFX-SD@yahoogroups.com wrote:
� �� � �; � � �� � � �Hi,
� �
I not only have the recaliberation error problem but also any sound
being played sounds as if the tuner is going slightly up and down.
This only starts to happen after it warms up. Even if only controlling
another sound via midi. Has anyone ever expierienced this problem
before and does the recaliberation error fix also fix this?
Thanks
Paul
2008-09-09 by James Pardonek
Mine had the same problem. I used contact cleaner (I think it was Peavey branded) and sprayed it in all of the pots. I also *CAREFULLY* removed all of the plugable chips one at a time and cleaned their contacts too. Just be careful not to bend any of the pins. Jim --- On Mon, 9/8/08, rhorton@... <rhorton@...> wrote:
From: rhorton@... <rhorton@...>
Subject: Re: [Ensoniq-VFX-SD] VFX SD problem
To: Ensoniq-VFX-SD@yahoogroups.com
Date: Monday, September 8, 2008, 5:27 PM
My SD1 does this, temporary fix is exercising the pitch wheel (rock it back and forth rapidly for 5 minutes). Eventually I will replace the pot. I think it gets a 'flat spot' in the center. you can set the pitch bend range to zero to eliminate it also. I had recalibration error too, not related to the pitch issue.
Rich
Sep 8, 2008 04:19:47 PM, Ensoniq-VFX- SD@yahoogroups. com wrote:
Hi,
I not only have the recaliberation error problem but also any sound
being played sounds as if the tuner is going slightly up and down.
This only starts to happen after it warms up. Even if only controlling
another sound via midi. Has anyone ever expierienced this problem
before and does the recaliberation error fix also fix this?
Thanks
Paul