Fairlight-CMI

The machine hasn't been moved. What happened was, I booted up, page 
1 appeared, then I noticed no responce from the keypad (LED) and 
qwerty keyboard. I saw that the communication cable (which isn't the 
orignal, so without the locks) had left lose from the other 
connector. And I pushed it back in the connector. At that moment the 
screen went green and no Led's on the keypad. I tried some different 
kind of boot-ups, but no succes. Also waited a day. I haven't tried 
to load any sounds, because I thought the system wasn't responding. 
It's an idea to try this, to figure out what's still working.

Hans


--- In Fairlight-CMI@yahoogroups.com, Andy L <chesti99@...> wrote:
>
> At 21:59 16/04/2007, you wrote:
> >Hello,
> >
> >after connecting the communication cable from the keyboard to the
> >mainframe, with the power on, my system doesn't start up anymore
> >(static electricity). It only shows a green square on the monitor 
and
> >the keypad of the music keyboard doesn't show any text at all.
> 
> Has the machine been moved since it was last in operation and how 
long 
> since the machine was last used?
> 
> >  I've
> >checked all the fuses on the back of the mainframe, they all are 
OK.
> >Also disconneced the music keyboard and plugged the qwerty 
keyboard
> >directly into the mainframe. Also no effect. I can here the 
diskdrives
> >running when I put in the boot disk, but nothing changes on the 
screen
> >or keypad.
> >Did anybody else have experience with this problem? Are there also
> >fuses on the cards inside the mainframe? If not which card could 
have
> >something to do with this problem?
> >
> >Thanks in advance
> >
> >Hans
> >
> >
> >
> >
> >
> >
> >Yahoo! Groups Links
> >
> >
> >
>