Yahoo Groups archive
Messages
Page 1 of 109 · 5429 messages matched
2019-10-22 by Björn Lindén
Hi list, I’m the admin of daw-mac, a list that upon til last week was hosted on yahoo. I migrated the list to groups.io . It can be done fairly easily. With a minimum of downtime. The only thing that you will (almost loose), is the archives. The archives can be handled fairly eas
2019-10-18 by Nigel Cruickshank
As some of you may know, as of December 14th Yahoo will delete any files or images uploaded or attached to the groups. Also, I believe they are moving to permanently end the Yahoo groups site from what I have read. It would be heartbreaking to lose the valuable info on this group
2019-10-10 by greg thurman
Does anyone have any Interesting Fairlight III sounds, librarys they would considering selling me? I would even possibly be interested in 8in series II disks. Greg
2019-10-05 by greg thurman
Does anyone have a working Fairlight III External or Internal Tape Streamer that there interested in selling? Greg
2019-09-22 by greg thurman
Including and the side view, and panel I'm needing for my IIIX as well. Thanks, Greg On Sunday, September 22, 2019, 2:10:56 PM MST, greg thurman trevon12001@yahoo.com [Fairlight-CMI] wrote: [Attachment(s) from greg thurman included below] Hi All, Does anyone possibly have any spa
2019-09-22 by greg thurman
Hi All, Does anyone possibly have any spare drive, side, and possibly rear face plates for IIIX. Attached are the photos of my IIX. Thanks, Greg
2019-09-05 by Alexander Peverett
Many thanks for your mail. I am currently on annual leave and will reply to your mail when I return to work in September. In case of anything urgent please contact another member of the SHL support staff. Many thanks, Alex. On 5 Sep 2019, at 02:41, Fairlight-CMI@yahoogroups.com w
2019-09-04 by Alexander Peverett
Many thanks for your mail. I am currently on annual leave and will reply to your mail when I return to work in September. In case of anything urgent please contact another member of the SHL support staff. Many thanks, Alex. On 31 Aug 2019, at 02:48, Fairlight-CMI@yahoogroups.com
2019-08-30 by Alexander Peverett
Many thanks for your mail. I am currently on annual leave and will reply to your mail when I return to work in September. In case of anything urgent please contact another member of the SHL support staff. Many thanks, Alex. On 29 Aug 2019, at 10:51, Fairlight-CMI@yahoogroups.com
2019-08-28 by greg thurman
Hi All, Does anyone have any extra Fairlight III spare Weighted Music Keys they would be willing to sell me? Thanks, Greg
2019-04-18 by Andrei Kudryavtsev
I can sell a tape drive or recover your tapes. I have at least two in a decent condition that I rebuilt recently. One I used last month to recover Trevor Horn's tapes. https://www.instagram.com/p/BuN9enpFox0/ https://www.instagram.com/p/Bt_X6atB4tr/ https://www.instagram.com/p/Bt
2019-04-17 by Larry DeLuca
I don't think I do anymore, but according to Peter Wielk they are cranky now and don't work that well. He's making an SD card he can install that you can even boot from which might be a better solution. That said, if you find your tape drive, I'm looking to unload a ton of DC 600
2019-04-17 by greg thurman
Anyone have a internal or external tape streamer they would sell for a series III? G On Wednesday, August 22, 2012, 9:52:39 AM MST, greg thurman wrote: | Anyone have a internal or external tape streamer they would sell for a series III? G |
2019-03-29 by greg thurman
Does anyone have any leads where I can find any replacement keys for a series III keyboard? Thanks, Greg Sent from my Verizon, Samsung Galaxy smartphone
2018-10-29 by dd_626@hotmail.com
Exact measurements would be great indeed. I know alot of people didn't exactly loved the stand but it is a piece of Fairlight design history. I do love every aspect of the designs., from hard to software. cheers, David
2018-10-07 by Dimitrios Pavlidis
Thank you so much Arpad i ll check it this week and let you know. Στις Κυριακή, 30 Σεπτεμβρίου 2018, 3:55:39 μμ EEST, ο χρήστης Arpad Beszedes arpadbeszedes@yahoo.com [Fairlight-CMI] έγραψε: Hi,I don't know if this is resolved yet, but the headphone output is really simple. It us
2018-09-30 by Arpad Beszedes
Hi,I don't know if this is resolved yet, but the headphone output is really simple. It uses the signal from the CMI-334 mixer card. Does this card produce the correct output? This signal is sent to the audio psu, metronome and headphones pcb (310). You could check the LM380 IC be
2018-09-22 by pavlidiad@yahoo.gr
Hi guys i m trying to figure how the heaphone output work on my CMI III i really dont know where i cna find more details on manual its not working on mine at all all the other outputs working fine any advice welcome i have also only the mfx keyobard and not any other keyboard doe
2018-09-21 by Rob Puricelli
Hi Nick, Please drop my colleague, Peter Wielk, a line. We may be able to help. horizontal_productions@hotmail.com Regards, Rob > On 21 Sep 2018, at 00:06, Nick Zampiello newallianceeast@yahoo.com [Fairlight-CMI] wrote: > > I am still looking for a Fairlight if anyone wants a lov
2018-09-20 by Nick Zampiello
I am still looking for a Fairlight if anyone wants a loving home for their spare! preferably late CMI or early MFX 16 voice 8 or 16 bit. nick z NEW ALLIANCE EAST!!!! -------------------------------------- New Alliance East - Mastering New Alliance East - Facebook X :::: B :::: S
2018-09-20 by Arpad Beszedes
Whoa, that's awesome. What a useful application for these cheap furniture... On Thursday, September 20, 2018, 8:23:00 PM GMT+2, andrei.kudryavtsev@gmail.com [Fairlight-CMI] wrote: I'm using IKEA lift desk adjusted to the size of the keyboard + IKEA tea table. https://www.youtube.
2018-09-20 by andrei.kudryavtsev@gmail.com
I'm using IKEA lift desk adjusted to the size of the keyboard + IKEA tea table. https://www.youtube.com/watch?v=EeZOIY2TvK0
2018-09-19 by feldmann
Try http://www.quiklok.com/ I use the WS650 for mine. Very sturdy stuff. On 2018-09-18 22:05, Arpad Beszedes arpadbeszedes@yahoo.com [Fairlight-CMI] wrote: > Sorry David, I cannot help. But I am also looking for a stand, and I > plan to build one. Anybody knows detailed measureme
2018-09-18 by Arpad Beszedes
Sorry David, I cannot help. But I am also looking for a stand, and I plan to build one. Anybody knows detailed measurements or has drawings perhaps? Thanks, Arpad On Tuesday, September 18, 2018, 3:07:16 AM GMT+2, dd_626@hotmail.com [Fairlight-CMI] wrote: Im looking for the origin
2018-09-16 by dd_626@hotmail.com
Im looking for the original Fairlight keyboard stand. let me know if you know if you have one and you are willing to sell .,or if you know of someone who has one that they do not use anymore. kind regards, David
2018-08-15 by dd_626@hotmail.com
think about it ; )
2018-06-19 by synthy55@yahoo.com
I have recently installed the CMI flash kit in my IIx but calling out to other users with a couple of questions 1. are you able to boot from the left floppy drive on startup like a stock machine? in my case when I boot no matter how the switches are set it doesnt find the floppy
2018-05-23 by dd_626@hotmail.com
Any chance we can migrate back to Yahoo as a community ? cheers, David
2018-05-09 by Nick Zampiello
if both can run page 2 ( up to MFX 3 plus? ) do the cards sounds the same? what is lost without the mixer card? also, how do you tell the differences between MFX 1/2/3 they all sorta look the same. thanks! nick z NEW ALLIANCE EAST!!!! -------------------------------------- New Al
2018-01-28 by Rob Puricelli
Hi Tony, I am very local to the CCH and could well be in a position to help you out regarding a CMI. I will drop you an email shortly to your Gmail address, if that’s ok? Regards, Rob Puricelli www.failedmuso.com > On 28 Jan 2018, at 14:03, Tony Jewell tonyjewell@gmail.com [Fairl
2018-01-28 by Tony Jewell
Hi all - apologies if this is a little off-topic. I'm organising this year's 'Synthesized' for the Centre for Computing History here in Cambridge, UK. Here's a bit of info on last year - http://www.computinghistory.org.uk/det/41952/Synthesized-22-23-July-2017/ Basically, it's a c
2017-12-05 by Jean-Bernard EMOND
Good news ;) Arturia CMI V
2017-10-15 by carlheinz
Hello Where you located? Not officially for sale...but ...could be tempted... I have a working series II in S California ...I'm still exploring its many sonic possibilities . Only 1 issue which is the numeric keypad on he keyboard is not responding to finger pressure very well. T
2017-10-15 by Nick Zampiello
Anyone have a CMI II or III for sale? NEW ALLIANCE EAST!!!! -------------------------------------- New Alliance East - Mastering New Alliance East - Facebook X :::: B :::: S On Sunday, September 10, 2017, 8:58:19 PM EDT, Andrei Kudryavtsev andrei.kudryavtsev@gmail.com [Fairlight-
2017-09-25 by Frank Reggiani
Hi Joe! Thank you again for the response! I actually did not get to test this without the USB mouse adapter AND without the lightpen both plugged in. All other assumptions made below are correct. I should clarify that the mouse cursor just blinks ever so slightly/quickly when the
2017-09-25 by britt@shapetable.com
Frank, Your horizontal flicker lines clue is very interesting. Let me make sure I understand: 1. With *no* USB mouse adapter connected, just CMI->Monitor a. With lightpen connected to monitor, random tiny horizontal flickers are seen b. With lightpen disconnected, *still* see tin
2017-09-24 by FJReggiani@hotmail.com
Hey Joe! Just wanted to update... Thank you again for your time and suggestions of help. Turns out it is the lightpen that was at fault. So now it's a process of finding someone to repair it. Any recommendations? Also, just wanted to ask in case you had any ideas: Monitor current
2017-09-11 by rob@failedmuso.plus.com
If you haven't already, it might be useful to share this over at the Facebook group as there will be plenty of people there who will find this useful :-) https://www.facebook.com/groups/4943488865/ :-)
2017-09-11 by andrei.kudryavtsev@gmail.com
Hi Rob, sure!!! see full MFX2 FCNs book there. it's a treasure on its own.
2017-09-11 by rob@failedmuso.plus.com
Hi Andrei, Thank you so much for an awesome resource! I think I have most of these but there are some that I don't, so its nice to plug those gaps. I will check to see if I have anything here that Peter Vogel sent over that isn't already in your pack. Very much looking forward to
2017-09-11 by andrei.kudryavtsev@gmail.com
Over the years I collected all available online Fairlight documentation and scanned everything I have. Here I want to share it with you: https://app.box.com/s/ackidakksji83l6y13g8sfegg9agbpan All documents are sorted, categorized and OCR'ed! You'll find many of them inside, inclu
2017-09-11 by Andrei Kudryavtsev
Thank you Joerg, I first thought for Dallas chip and replaced it right way but that wasn't a problem. I got the system running again by burning all ROMs with "blowall". It could happen that some parts were exchanged with other system and messed up SW versions. -- Andrei Kudryavts
2017-09-09 by dkevefnzs@yahoo.com
Hi Andrei. These are just two shots in the dark (as I would have to look up old notes to make it more reliable) - but: 1. Might your Dallas Chip (=RealTimeClock with RAM) Battery be dead? (Same possibility in the replacement CPU board of same age, naturally...) Suitable replaceme
2017-09-01 by britt@shapetable.com
Hi Frank! No worries, and wish I had more time to spend on this stuff. :-) Glad to hear the mouse adapter works if you unplug the lightpen. That narrows the problem down significantly. That means that the Q219 is good and the cabling/connections from the Q219 to the VDU connector
2017-09-01 by FJReggiani@hotmail.com
Hey there Joe! Thank you SO MUCH for this message! I know you're a busy man, so I sincerely appreciate your time and the great info! Ok, so here's where I'm at currently: Checked and cleaned all connections, and re-sat the Q219 card. Still the same issue. Monitor graphics are NOT
2017-09-01 by britt@shapetable.com
Hi Frank, Could you try: - Keep the USB mouse adapter plugged in - Unplug the lightpen from the Fairlight monitor (VDU) And see if it still looks like HIT is stuck? The USB mouse adapter will prioritize the HIT from the lightpen and hide the mouse cursor. This is so you can switc
2017-08-28 by FJReggiani@hotmail.com
Thank you so much Joe! Those pics are AWESOME! And thanks again Peter!
2017-08-28 by britt@shapetable.com
Hi Frank and Peter - Sorry for the delayed reply. I was able to take some detailed photos of the CRT trim gasket, posted here: https://groups.yahoo.com/neo/groups/Fairlight-CMI/photos/albums/1241593787 I always felt like it didn't fit quite right, and I think it shrank (lengthwis
2017-08-26 by John Smith
Hi Frank, The fact that the USB-mouse also gives problems is an indicator that light-pen is not at fault I think. I suggest you join Facebook and become a member of Fairlight CMI group. This Yahoogroup is pretty low in activity. Try reseating flatcables and card. Regards, Peter K
2017-08-26 by FJReggiani@hotmail.com
Hey there everyone, just looking for some advice for a direction to proceed... Appears the light pen for my IIx is stuck in the HIT mode, only the issue is not in the actual pen but I believe somewhere else. Anyone experience something like this before? I can't get a cursor to di