Re: [Fairlight-CMI] Re: IIx CRT replacement
2017-08-26 by FJReggiani@hotmail.com
Thank you so much Peter! I appreciate the response!
Messages
Browse messages
Page 2 of 109 · 5429 messages matched
Re: [Fairlight-CMI] Re: IIx CRT replacement
2017-08-19 by John Smith
Hi Frank, Not sure if Joe answered, so I had a look for you. Shape is "tadpole" indeed. The "tail" is 9 mm, the head 3 mm long, 2 mm thick. I suggest to use a glue that stays somewhat flexible. Kind regards, Peter Kersten. From: Fairlight-CMI@yahoogroups.com on behalf of FJReggia
Re: IIx CRT replacement
2017-08-06 by FJReggiani@hotmail.com
Hey there Joe! Apologies for the intrusion, but hoping you could assist with a project I'm working on... Looking to replace the black gasket around my CMI's monitor (got mine with it missing). I'm going down the road of having some custom extrusion made for this. From the pics yo
Something silly MFX 3+
2017-07-05 by andrei.kudryavtsev@gmail.com
Hi team, I'm trying to run MFX3+ after few months sitting in a storage room. I previously had one which was running just great, but looks I'm missing something trivial here. So, here is a story, I'm booting 15.6.05 until to the last moment where it can't start "mdrwsmain" and fai
Re: [Fairlight-CMI] Looking for MFXmini
2017-06-10 by Steve Rance
I have quite a few, contact me on steve@fairlightus.com. I'm in Jersey if that helps. [Steve] Sent from my iPad Pro > On Jun 10, 2017, at 19:16, andrei.kudryavtsev@gmail.com [Fairlight-CMI] wrote: > > Hi group, I'm looking for MFXmini ideally in the US. Please, let me know if you
Looking for MFXmini
2017-06-10 by andrei.kudryavtsev@gmail.com
Hi group, I'm looking for MFXmini ideally in the US. Please, let me know if you have one for sale. Thanks!!!!
How do i set the CMI3 / MFX to slave to timecode, i can't find the parameter anywhere!
2017-01-24 by ataritt@yahoo.com
How do i set the CMI3 / MFX to slave to timecode, i can't find the parameter anywhere! Please note step by step as the cmi still has lots of secrets for me. Thanks lads!
Re: [Fairlight-CMI] Re: The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a USB mouse.
2017-01-08 by John Smith
This adapter is not for a series III. It's for series I,II and IIx. Series III has another solution. Check with Peter Wielk for more info. :-) From: Fairlight-CMI@yahoogroups.com on behalf of Larry DeLuca deluca.larry@gmail.com [Fairlight-CMI] Sent: Sunday, January 8, 2017 12:18
Re: [Fairlight-CMI] Re: The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a USB mouse.
2017-01-07 by Larry DeLuca
Hello, all, Will it work on the Series III? Sent from my iPhone > On Jan 7, 2017, at 4:55 PM, John Smith synthserv@hotmail.com [Fairlight-CMI] wrote: > > > > Added :-) > > The list is just in order to get an estimate of materials needed. The kits will be build by JB Emond. He wil
Re: [Fairlight-CMI] Re: The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a USB mouse.
2017-01-07 by John Smith
Added :-) The list is just in order to get an estimate of materials needed. The kits will be build by JB Emond. He will create an extra page at his website, where an order can be placed. I will post a message here when the page is up Regards, Peter Kersten. From: Fairlight-CMI@ya
Re: [Fairlight-CMI] Re: The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a USB mouse.
2017-01-07 by John Smith
Added :-) From: Fairlight-CMI@yahoogroups.com on behalf of Laurence Shields mercybox@gmail.com [Fairlight-CMI] Sent: Friday, January 6, 2017 8:20 PM To: Fairlight-CMI@yahoogroups.com Subject: Re: [Fairlight-CMI] Re: The CMI Lightpen adapter: It enables you to connect a modern LCD
Re: The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a USB mouse.
2017-01-07 by Kirk@lotus30.com
I do want to be added to the list. Is this post sufficient to do that? I just tried to look at the Facebook CMI page and Facebook would not let me see it without logging in or signing up. I don't do Facebook so I can't see that page.
Re: [Fairlight-CMI] Re: The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a USB mouse.
2017-01-07 by Kirk@lotus30.com
I guess I was not clear. I do want to sign up for one. Is this post sufficient to get me on the list? I don't do facebook and when I just went to look at the CMI Group page, Facebook would not show it to me without signing up. Kirk
Re: [Fairlight-CMI] Re: The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a USB mouse.
2017-01-06 by Laurence Shields
Please put me down for one as well. :-) I'm not on Facebook, I'm afraid. Laurence Shields mercybox@gmail.com On 1/5/2017 4:22 PM, John Smith synthserv@hotmail.com [Fairlight-CMI] wrote: Hi Kirk, If you want one you can check the Fairlight CMI group on facebook. You can place your
Re: [Fairlight-CMI] Re: The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a USB mouse.
2017-01-05 by John Smith
Hi Kirk, If you want one you can check the Fairlight CMI group on facebook. You can place your order there or here with me. I'm just the one to get this batch going. I don't earn on it, just want one myself and there was a minimum amount needed of 5. We are at 11 now. I'm keeping
Re: [Fairlight-CMI] Re: The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a USB mouse.
2017-01-05 by John Smith
Name added From: Fairlight-CMI@yahoogroups.com on behalf of wdevos@bham.rr.com [Fairlight-CMI] Sent: Wednesday, January 4, 2017 2:29 PM To: Fairlight-CMI@yahoogroups.com Subject: [Fairlight-CMI] Re: The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a US
Re: The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a USB mouse.
2017-01-04 by Kirk@lotus30.com
I'm very interested as well. You can reach me at kirk@lotus30.com Kirk
Re: The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a USB mouse.
2017-01-04 by wdevos@bham.rr.com
Please add my name to the list. I would like one CMI Lightpen adapter for my IIx. In the past, I purchased the floppy adapter from Jean-Bernard. Thanks William DeVos Please contact me thru this list since I am not on Facebook.
The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a USB mouse.
2017-01-03 by John Smith
The CMI Lightpen adapter: It enables you to connect a modern LCD monitor and a USB mouse. There is a minimum number of 5 orders needed to get them build. Anyone interested? I'm in for one . Two others are interested already, so just 2 more people needed. You can reach me via this
Re: CRT replacement.
2016-10-23 by andrei.kudryavtsev@gmail.com
This topic is also discussed at Fairlight FB page: https://www.facebook.com/groups/4943488865/
Re: [Fairlight-CMI] CRT replacement.
2016-10-22 by John Smith
It turned out that it has the plastic laminate. This is now starting to suffer from well known problem of "rot". The CRT was new when I bought the unit, so I was very happy with it. Not so happy when I noticed the first signs of rot last night... From: Fairlight-CMI@yahoogroups.c
Re: [Fairlight-CMI] CRT replacement.
2016-10-22 by Gordonjcp
On Sat, Oct 22, 2016 at 04:08:15AM -0700, synthserv@hotmail.com [Fairlight-CMI] wrote: > How are things nowadays when you need a new CRT for a IIx? > What's wrong with the one that's in it? Bad screenburn? If it's gone low emission you may be able to borrow a "booster" from the o
CRT replacement.
2016-10-22 by synthserv@hotmail.com
How are things nowadays when you need a new CRT for a IIx?
Re: CMI III V9.34 not booting
2016-09-17 by daniel.rudin@pixelvampyr.ch
Dear Group, Thanks to JB Emond i managed to get ahold of a Flash-Floppy-Replacement to get some baby-steps further with getting my CMI back to live.. Now it seems i have a problem with the 'Quasar' parts.. The Diagnostics point to missing interrupts and parity errors on the cpu-r
Re: R: [Fairlight-CMI] Re: solved: MFX3+ works again :-) - A warning re. its card cage guiding rails. Notes on functionality, user interface etc.
2016-09-06 by dkevefnzs@yahoo.com
Hi Fabio Thanks for your offer. I've already got the machine with a spare PSU already (the seller had stripped another one), so I could put the one with the dead capacitor aside. :-) Kind regards, Joerg
Re: R: [Fairlight-CMI] Re: solved: MFX3+ works again :-) - A warning re. its card cage guiding rails. Notes on functionality, user interface etc.
2016-08-24 by fabio delben
I have a spare psu for sale if you are interested. Ciao Fabio Inviato da Yahoo Mail per iPad From: dkevefnzs@yahoo.com [Fairlight-CMI] ; To: ; Subject: Re: R: [Fairlight-CMI] Re: solved: MFX3+ works again :-) - A warning re. its card cage guiding rails. Notes on functionality, us
Re: CMI III V9.34 not booting
2016-08-21 by dkevefnzs@yahoo.com
Hi Daniel. I just checked your info against my system. It has the same boot ROM but a different hardware setup. I find the following: What you see confirms that both core CPUs (from the 2xx card) are running. If I stop either from the front panel, I do NOT get the display cleared
Re: R: [Fairlight-CMI] Re: solved: MFX3+ works again :-) - A warning re. its card cage guiding rails. Notes on functionality, user interface etc.
2016-08-21 by dkevefnzs@yahoo.com
Hello Fabio Thank you for your reply. It's very nice to hear you're still using them. At the moment, I'm busy with other work and have not yet had the time to get cables, or to install the machine in a reasonable place, so sadly, I don't know when I'll get back to it. Before, how
CMI III V9.34 not booting
2016-08-01 by daniel.rudin@pixelvampyr.ch
Dear Group.. I'm at restaurating a CMI III that i managed to aquire but have a strange problem, that i hope the whole knowledge of this combined group can help me getting this wonderful instrument back to life.. What is at hand: I have the following cards: WFM-32 Slot 2 CMI31 Rev
Re: R: [Fairlight-CMI] Re: solved: MFX3+ works again :-) - A warning re. its card cage guiding rails. Notes on functionality, user interface etc.
2016-08-01 by fabio delben
Yes, it is the 15.9.04. It didn't require the software dongle. Ciao Fabio -------------------------------------------- Mer 27/7/16, andrei.kudryavtsev@gmail.com [Fairlight-CMI] ha scritto: Oggetto: Re: R: [Fairlight-CMI] Re: solved: MFX3+ works again :-) - A warning re. its card
Re: R: [Fairlight-CMI] Re: solved: MFX3+ works again :-) - A warning re. its card cage guiding rails. Notes on functionality, user interface etc.
2016-07-30 by fabio delben
I'll check it. Ciao Fabio Inviato da Yahoo Mail per iPad From: andrei.kudryavtsev@gmail.com [Fairlight-CMI] ; To: ; Subject: Re: R: [Fairlight-CMI] Re: solved: MFX3+ works again :-) - A warning re. its card cage guiding rails. Notes on functionality, user interface etc. Sent: Wed
Re: R: [Fairlight-CMI] Re: solved: MFX3+ works again :-) - A warning re. its card cage guiding rails. Notes on functionality, user interface etc.
2016-07-27 by andrei.kudryavtsev@gmail.com
Hi Fabio, I didn't know that last MFX3+ SW release didn't require dongle anymore. is it 15.9.04?
R: [Fairlight-CMI] Re: solved: MFX3+ works again :-) - A warning re. its card cage guiding rails. Notes on functionality, user interface etc.
2016-07-27 by fabio delben
Hi Joerg, I experienced some similar problems with my mfx3+ in the past, but if you install the last software revision on the boot hd you don't need the dongle key anymore. The server for these mainframe was the Medialink but I'm not sure about the file export limitation of 48 kh
Re: [Fairlight-CMI] Looking for Fairlight Series III Music Keyboard replacement white Ivory Keys [2 Attachments]
2016-07-21 by Tristan
Hello Gregory, Not mine, but this may have the parts you need: http://www.ebay.com/itm/Fairlight-CMI-Keyboard-with-3-broken-keys-for-spare-parts-only-/262536863359 Regards, Tristan Monday, July 18, 2016, 9:42:08 AM, you wrote: [ Attachment(s) from greg thurman included below] Hi
Looking for Fairlight Series III Music Keyboard replacement white Ivory Keys
2016-07-17 by greg thurman
Hi Fellow Fairlight Friends, I'm looking for a few extra white Ivory Keys for my Fairlight III Music Keyboard. I believe they maybe the fatar type keys that where produced for the Series III. I have a attached a few pics. I would be interested in purchasing these if someone would
Re: solved: MFX3+ works again :-) - A warning re. its card cage guiding rails. Notes on functionality, user interface etc.
2016-07-16 by dkevefnzs@yahoo.com
Hi all, again. The remaining error messages (including: "DCC software incompatible", multiple timeouts when starting mdr... processes) could be cured by (as I guess) mainly by reseating all DCC cards and front connectors (again), and the SYNC card. The latter was a bit tricky, be
solved: (making progress) MFX3+ reports missing Dongle/Key after semi-manual startup - and notes on login, configuration, dead battery etc.
2016-07-16 by dkevefnzs@yahoo.com
Hello again. Still a little bit besides the exact group focus - but as I've seen MFX3+ mentioned before, and it's a close relative of the CMI, I'm posting my findings just for reference and for the benefit of others who might like to use both machines together. Hope this is ok. -
MFX3+ reports missing Dongle/Key after semi-manual startup - does anyone know more about this?
2016-07-15 by dkevefnzs@yahoo.com
Hi all. I just got an mfx3+ from someone who got it from a studio - just the box, the MFX3 keyboard, no cabling. Now it appears I might need a dongle or key to run the machine - I can't find anything about that in the PDF manuals, and only one post in this group recommending to "
RE: [Fairlight-CMI] Series III introductory manual and "Subfunctions"
2016-07-01 by John Smith
Thanks for the quick reply :-) Cheers, Peter Kersten. To: Fairlight-CMI@yahoogroups.com From: Fairlight-CMI@yahoogroups.com Date: Fri, 1 Jul 2016 07:19:04 -0400 Subject: Re: [Fairlight-CMI] Series III introductory manual and "Subfunctions" Subvoices are the individual samples tha
Re: [Fairlight-CMI] Series III introductory manual and "Subfunctions"
2016-07-01 by Brad MacDonald
Subvoices are the individual samples that make up a voice Sent from my iPhone > On Jul 1, 2016, at 4:25 AM, John Smith synthserv@hotmail.com [Fairlight-CMI] wrote: > > I am reading the reference manual from the series III in order to compare it to a series IIx. There seems to be
RE: [Fairlight-CMI] Series III introductory manual and "Subvoices"
2016-07-01 by John Smith
The subject should read subvoices, not sub functions ;-) Sorry.... Cheers, Peter Kersten. To: fairlight-cmi@yahoogroups.com From: Fairlight-CMI@yahoogroups.com Date: Fri, 1 Jul 2016 10:25:00 +0200 Subject: [Fairlight-CMI] Series III introductory manual and "Subfunctions" I am rea
Series III introductory manual and "Subfunctions"
2016-07-01 by John Smith
I am reading the reference manual from the series III in order to compare it to a series IIx. There seems to be another manual called "introductory manual". Does anyone have that as pdf? The reference manual doesn't explain what subvoices are and refers to the "introductory manua
[Fairlight-CMI] Re: suspicious auction on ebay Germany
2016-06-06 by Malte Rogacki
...and it's gone and so is the account of the scammer.
[Fairlight-CMI] Re: suspicious auction on ebay Germany
2016-06-06 by Malte Rogacki
Of course it's a fake. That particular scammer has been offering high-priced musical instruments for quite some times (always under new accounts because eachone gets killed very quickly). At least I believe that's the same scammer; I recall auctions for a Jupiter 8 and an ARP 260
Re: suspicious auction on ebay Germany
2016-06-06 by dkevefnzs@yahoo.com
Peter has replied and confirms it's quite probably a fake. Kind regards, Joerg
Re: suspicious auction on ebay Germany
2016-06-06 by dkevefnzs@yahoo.com
Hello all. I've asked them for additional pictures a day or two ago and haven't got any response. I've also asked Peter where he might have shipped his last auction :-) Kind regards, j.
Re: [Fairlight-CMI] Re: suspicious auction on ebay Germany
2016-06-04 by Gordonjcp
On Sat, Jun 04, 2016 at 02:54:06PM -0700, Andrei Kudryavtsev andrei.kudryavtsev@gmail.com [Fairlight-CMI] wrote: > Can be similar fake as with stolen pictures of my unit > http://glasgow.craigslist.co.uk/msd/5571301465.html > Did you ever get a response from that guy? If anyone i
Re: suspicious auction on ebay Germany
2016-06-04 by Andrei Kudryavtsev
Can be similar fake as with stolen pictures of my unit http://glasgow.craigslist.co.uk/msd/5571301465.html -- Andrei Kudryavtsev, Follow me on Facebook , Instagram Music technologies by Deftaudio ( www.deftaudio.ru )
suspicious auction on ebay Germany
2016-06-04 by Malte Rogacki
http://www.ebay.de/itm/Fairlight-Series-III-CMI-/231962903971? Sounds like someone copied an older auction from Horizontal Productions... Freshly registered ebay member, too.
SCAM on CL
2016-05-26 by andrei.kudryavtsev@gmail.com
Please, be careful, somebody uses my photos of CMI-III to scam people, Fairlight CMI Series III MFX Fairlight CMI Series III MFX Up for sale a Fairlight CMI Series III MFX system in awesome condition. Configuration, components, parts. Here is the exact list what is included into