Hi James, I'm not too sure, likely because of fewer memory, but the diskette drives do spin all the time so that uses electricity. I really should do a test on all the equipment to find out. Best regards, Harald. > > Hi Harald, > > > Thanks for your post. I presume that the CMI 2X uses much less power than > a > series 3 ? I will try and calculate an accurate usage for the whole > studio. > > Many thanks, > > James Thomson > > > > > > > On 7/6/07 16:41, "Harald Feldmann" <feldmann@xs4all.nl> wrote: > >> James, is it really that expensive ? >> >> In the Netherlands, 15 euro-cents per hour for a fairlight is not overly >> bad I'd say.. My console uses 480 watts and I have no qualms running it. >> If you factor everything in, several fairlights, console, outboard and >> lights, it adds up electrically. My prime concern would be groundloop, >> heat buildup and electric limitations on the cabling, not the cost. >> >> With regard to your question, subtract 12-15 watts for every harddrive >> you >> detach. Probably 90 watts or so for the memory. Your local >> do-it-yourself >> construction market will have a power consumption meter, they are around >> 10 euros, it shows current power usage, cumulative, voltage etc. >> >> Regards, >> Harald >> >>> Bonjour Laurent, >>> >>> >>> Merci beacoup pour votre reponse ! My CMI MFX-2 has the 32 meg ram card >>> and >>> uses an external 3 1/2" optical cartridge drive. Would the consumption >>> be >>> significantly less than 480 watts ? The CMI is very expensive to run at >>> 480 >>> watts !!! >>> >>> A bientot, >>> >>> James >>> >>> >>> >>> >>> >>> >>> On 7/6/07 14:57, "Laurent Lemaire" <llemaire1@free.fr> wrote: >>> >>>> >>>> Hi James, >>>> >>>> I made the measure a few days ago on my CMI 3 (rev6.03) >>>> which has got two big ESDI HD and 14Mb of RAM (CMI-39) >>>> >>>> The global consumption is 480 Watts. >>>> >>>> Laurent. >>>> >>>> >>> >>> >>> >>> >>> >>> Yahoo! Groups Links >>> >>> >>> >>> >> >> >> >> >> >> Yahoo! Groups Links >> >> >> > > > > > > Yahoo! Groups Links > > > >
Message
Re: [Fairlight-CMI] CMI 2X and 3 power consumption
2007-06-08 by Harald Feldmann
Attachments
- No local attachments were found for this message.