Yahoo Groups archive

Fairlight-CMI

Index last updated: 2026-04-29 00:03 UTC

Message

Re: [Fairlight-CMI] Switch Lamp update [correct link Warm White LED]

2007-08-28 by Peter K.

In the Netherlands I found a place to get the LED's. Even better ones because they have a spreading angle of 120 Degrees.
Here is the link to that LED: http://www.leds-buy.nl/warm-witte-led-120-graden-5mm-p-672.html
Conrad's alternative: http://www.conrad.fr/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10001&storeId=10001&productId=124848&langId=-2&ItemHighLightId=124850&from_fh=1&category=recherche
(That's France Conrad, Dutch conrad has them too.) These are probably too cool white and they are 24 V instead of 20 V. (Not sure yet if that's a problem)..
The dimensions of the orinal bulb are: ca. 5 x 30 mm Specs: T5.5 fitting - 24 Volt - 50 mA
One Dutch adres to get them: http://www.elektronica-online.nl/ (Search T5.5)
If you need them just type "T5,5" in Google.....
A picture is attached. (Not sure if it will appear) If it not appears, just have a look at the last link, there is a large picture of it.
Regards,
Peter K.
----- Original Message -----
Sent: Tuesday, August 28, 2007 8:09 PM
Subject: RE: [Fairlight-CMI] Switch Lamp update [correct link Warm White LED]

Can you post a photo with a meter near the lamp ?
(To show exacts dimensions and form)
it's possible conrad electronics have this type of lamp.
Best regards

>From: "Peter" <synthserv@hotmail.com>
>Reply-To: Fairlight-CMI@yahoogroups.com
>To: Fairlight-CMI@yahoogroups.com
>Subject: [Fairlight-CMI] Switch Lamp update [correct link Warm White LED]
>Date: Tue, 28 Aug 2007 01:35:34 -0000
>
>Here is the correct link for the Warm White LED
>
>http://ledsupply.com/l1-0-ww5th50-1.php
>
>The previous post had the link to the normal White LED.
>
>Cheers,
>
>Peter K.
>
>
>

__________________________________________________________
Gagnez des écrans plats avec Live.com http://www.image-addict.fr/

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.