Hi Joe,
thanks very much for your help!!
Jep, i already cleaned the Solenoid and checked with all the testpoints that everything (index, track 0 etc) is in working condition.. so last part missing is the alignment of the head itself.. not possible to repair without a Alignmentfloppy and exerciser :-(
So, as sad as i am to not getting that floppys to work again.. seems i have no other Options left..
best regards
Daniel
---In Fairlight-CMI@yahoogroups.com, <joe.sleator@...> wrote:
Hi Daniel,
I'd recommend not giving up on those floppy drives just yet. If you can get around the top and bottom of them, make sure the plunger solenoid that loads the heads to the floppy can move freely and has not gummed up with old grease. You can carefully clean and re-lube it with WD-40 if it has, that has worked for me. I'd also pull off the data connector at the back and push it on and off a few times.
There should be a definite 'clunk' when the system starts trying to read the floppy. If you don't see the solenoid pull the plunger all the way, that's most likely your problem. It's very common.
I have actually never seen an 8" floppy drive fail electrically, but I'm sure they can.
In addition to that, the floppies themselves are pretty legendary as magnetic media goes. I've got readable media that looks like it spent 20 years at the bottom of an English duck pond.
If none of that works, I might be able to find a version of the cmi K partitions, not sure if it's 11.93 though.
Regards,
Joe
On Sun, Nov 17, 2013 at 9:28 PM, <daniel.rudin@...> wrote:Dear Fairlightians,
as all my Floppydrives are starting to end their lives, i'm looking for help..
does anyone have imaged their V11.39 System-Harddisk with CMIOS9 and is willing to help me by passing that image over?
I have V11.39 on 8" but sadly, can't read the floppys anymore..
best regards and thanks
Daniel
daniel.rudin@...