Fairlight-CMI

On Sun, 21 Mar 2004 12:00:32 -0800, Daniel Walters
<herrdw@prodigy.net> wrote:

>Hello all, 

Hi Daniel,

>The rectangular white connector is what I'd call a "field installed" mod,
>since the hole for it was cut out in a sloppy manner. As the photo shows,
>it's a 6 conductor, with only 4 pins apparently installed (the one just
>above the serial number plate).

Looks like a power connector, possibly for an external SCSI device ?

>The other connector appears to be a printer port (blue connector, lower
>edge)? 

No, it is a 50-pin 'centronics' scsi connector. If you count the pins,
you'll end up with 50. CMI printer ports are DB25 female connectors,
the same ones you find on the back of a PC.

>Both are, unfortunately, unlabeled.

>I have not popped the rear panel off to trace the connections (not brave
>enough yet!). I do not have any optional cards installed other than the
>General Interface MIDI/SMPTE box.
>
>Any insight into these would be most appreciated.

Likely external storage connectors. My 2 cents :)
Possibly +5 and +12 volts on the square connector.

>Cheers,
>
>Daniel

Best regards,
Harald.