Fairlight-CMI

Hi Laurent,

That would be great, thanks :-)

P

-----Original Message-----
From: Fairlight-CMI@yahoogroups.com
[mailto:Fairlight-CMI@yahoogroups.com]On Behalf Of Laurent Lemaire
Sent: 13 June 2005 10:05
To: Fairlight-CMI@yahoogroups.com
Subject: RE: [Fairlight-CMI] Series 3 Filter Resonance



Hi all,

I know it works on my CMI 3. But it took me some time
to find the right range to have a resonance effect.

This evening, I'll check the range and I'll post a mp3
file on my web site to demonstrate the resulting effect.

Regards.

   Laurent.





 
Yahoo! Groups Links



 




This e-mail is confidential and may be privileged. It may be read, copied and used only by the intended recipient. No communication sent by e-mail to or from Eidos shall form the basis of an offer or counter-offer which is capable of being accepted so as to create legally binding relationships. The recipient acknowledges that Eidos is unable to exercise control over the content of information contained in transmissions made via the internet. Eidos hereby excludes any warranty as to the quality or accuracy of any information contained in this message or any attachment and any liability of any kind for the information contained in it or any attachment or for its transmission, storage or use in any way whatsoever.

Hi all,

I remember doing some experiments on the resonance filters on Pascal 
Nicot's CMI III (rev 9.34). (the first time he came to visit me, he 
brought his III to my place) ( Hi Pascal !)
to be honest, the result was a bit disapointing.
thought this parameter can be adjusted, the resonance that can be 
obtained is not dramatical.
Nothing like what you get with any analog synth.
It seems that Fairlight considered the filter as a reconstruction 
filter only, and only added the resonnance to steepen the slope of the 
filter... not something to really sculpt the harmonics in itself à la 
PPG.

Cheers

Rene-Yves




--- In Fairlight-CMI@yahoogroups.com, "Peter Connelly \(Core Design 
Ltd.\)" <PeterC@C...> wrote:
> Hi Laurent,
> 
> That would be great, thanks :-)
> 
> P
> 
> -----Original Message-----
> From: Fairlight-CMI@yahoogroups.com
> [mailto:Fairlight-CMI@yahoogroups.com]On Behalf Of Laurent Lemaire
> Sent: 13 June 2005 10:05
> To: Fairlight-CMI@yahoogroups.com
> Subject: RE: [Fairlight-CMI] Series 3 Filter Resonance
> 
> 
> 
> Hi all,
> 
> I know it works on my CMI 3. But it took me some time
> to find the right range to have a resonance effect.
> 
> This evening, I'll check the range and I'll post a mp3
> file on my web site to demonstrate the resulting effect.
> 
> Regards.
> 
>    Laurent.
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 
> 
> This e-mail is confidential and may be privileged. It may be read, 
copied and used only by the intended recipient. No communication sent 
by e-mail to or from Eidos shall form the basis of an offer or 
counter-offer which is capable of being accepted so as to create 
legally binding relationships. The recipient acknowledges that Eidos 
is unable to exercise control over the content of information 
contained in transmissions made via the internet. Eidos hereby 
excludes any warranty as to the quality or accuracy of any information 
contained in this message or any attachment and any liability of any 
kind for the information contained in it or any attachment or for its 
transmission, storage or use in any way whatsoever.

Hi all,

Sorry for the delay, I had no spare time this week... Here you go :

http://www.vectorsurfacingtools.com/fairlight/samples/

 - Original_Sound.mp3       [the reference]
 - Filter_Frequency.mp3     [only modifying the filter cutoff frequency]
 - Filter_Resonance.mp3    [only modifying the filter resonance]
 
In the FX page, SVC parameters :
---------------------------
The Frequency range :  [ -20 / +90 ]
The Resonance range : [ +240 / +15 ]

I know the resonance range looks suspicious... but that's the default
value and it works fine like this .... Don't ask me why !  ;-)

I did the sample using my MemoryMoog.

Hope it helps.

    Laurent.