Fairlight-CMI

Here is a list I made a while ago, while calibrating my IIx. VR7 Is
the top-one.

The pagenumbers are the actual original pagenumbers of the
service-manual. The numbers in the PDF are higher. (Also there are two
versions out there. One is scanned in wrong, the pages are not
straight.  I used the version with the correct scanned pages. The page
numbers differ between these versions)

VR7 V/Octave control              (page 79)    [page 110 of PDF]
VR6 Filter Control Bias           (page 78+79) [page 109+110 of PDF]
VR5 VCA Control Gain              (page 80)    [page 111 of PDF]
VR4 VCA Control Bias              (page 80)    [page 111 of PDF] 
VR3 VCA distortion                (page 81)    [page 112 of PDF]
VR2 Filter Distortion (Res)       (page 80)    [page 111 of PDF]
VR1 Envelope Offset Adjust        (page 78+81) [page 109+112 of PDF]

Hope this helps :-)

Cheers,

Peter Kersten.

Le 8 nov. 07 à 20:31, Peter Kersten a écrit :

> Here is a list I made a while ago, while calibrating my IIx. VR7 Is
> the top-one.
>
> The pagenumbers are the actual original pagenumbers of the
> service-manual. The numbers in the PDF are higher. (Also there are two
> versions out there. One is scanned in wrong, the pages are not
> straight. I used the version with the correct scanned pages. The page
> numbers differ between these versions)

Two version of service manual, because one for CMI II (june 1982) and  
other one for CMI IIX (V2.1  february 1985) ;)

CMI II : <http://egrefin.free.fr/eng/fairlight/cmi2manuals.php>

CMI IIX : <http://egrefin.free.fr/eng/fairlight/cmi2xmanuals.php>

best regards,

JB

>
> VR7 V/Octave control (page 79) [page 110 of PDF]
> VR6 Filter Control Bias (page 78+79) [page 109+110 of PDF]
> VR5 VCA Control Gain (page 80) [page 111 of PDF]
> VR4 VCA Control Bias (page 80) [page 111 of PDF]
> VR3 VCA distortion (page 81) [page 112 of PDF]
> VR2 Filter Distortion (Res) (page 80) [page 111 of PDF]
> VR1 Envelope Offset Adjust (page 78+81) [page 109+112 of PDF]
>
> Hope this helps :-)
>
> Cheers,
>
> Peter Kersten.
>
>
>

Tnx guys, missed that one in the diagnostics section.

Thought I had to look in the (non available) channel card schematics.

Cheers,
Patrick