Yahoo Groups archive

Fairlight-CMI

Index last updated: 2026-04-29 00:03 UTC

Thread

Re: [Fairlight-CMI] Re: Alpha Keyboard needed

Re: [Fairlight-CMI] Re: Alpha Keyboard needed

2008-07-07 by Harald Feldmann

Hi mike,

Not sure if there is a fuse to the power for the alpha keyboard, you might
try with a breakout connector and a voltage meter. I do not have the
manuals handy, so I cannot verify the fuse hypothesis for you right now.
You may also check the cabling for a broken wire.

I would find a dead keyboard after succesful use unusual, unless there is
a short or cable broken.

Regards,
Harald.
Show quoted textHide quoted text
> Hi Harald,
>
> it does not respond any more... nothing. Will check if it still gets
> operating power from the CMI but for the case I just wanted to look
> around for a replacement.
>
> Greetz,
>
> Mike
>
> --- In Fairlight-CMI@yahoogroups.com, "Harald Feldmann"
> <feldmann@...> wrote:
>>
>> Hi Michael, what is the problem with the keyboard ?
>>
>> > Hi!
>> >
>> > A friend of mine has some problems with his alpha keyboard for
> his CMI
>> > III. Does someone know where to get a new one or who could help
> for
>> > repair in Germany?
>> >
>> > Thanks a lot and all the best,
>> >
>> > Mike
>> >
>> >
>> > ------------------------------------
>> >
>> > Yahoo! Groups Links
>> >
>> >
>> >
>> >
>>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

Re: Alpha Keyboard needed

2008-07-10 by Michael

HI Harald,

I have checked the power for the alpha keyboard and it is there. So it
seems that there is something defective inside, something with the
data transfer. Maybe a short circuit or some capacitors loosing their
capacity. 

But anyway, thank you for your help, it seems that there will be
another opportunity how this guy will proceed now with the unit. 

All the best,

Mike 

--- In Fairlight-CMI@yahoogroups.com, "Harald Feldmann" <feldmann@...>
wrote:
>
> Hi mike,
> 
> Not sure if there is a fuse to the power for the alpha keyboard, you
might
> try with a breakout connector and a voltage meter. I do not have the
> manuals handy, so I cannot verify the fuse hypothesis for you right now.
> You may also check the cabling for a broken wire.
> 
> I would find a dead keyboard after succesful use unusual, unless
there is
Show quoted textHide quoted text
> a short or cable broken.
> 
> Regards,
> Harald.
> 
> > Hi Harald,
> >
> > it does not respond any more... nothing. Will check if it still gets
> > operating power from the CMI but for the case I just wanted to look
> > around for a replacement.
> >
> > Greetz,
> >
> > Mike
> >
> > --- In Fairlight-CMI@yahoogroups.com, "Harald Feldmann"
> > <feldmann@> wrote:
> >>
> >> Hi Michael, what is the problem with the keyboard ?
> >>
> >> > Hi!
> >> >
> >> > A friend of mine has some problems with his alpha keyboard for
> > his CMI
> >> > III. Does someone know where to get a new one or who could help
> > for
> >> > repair in Germany?
> >> >
> >> > Thanks a lot and all the best,
> >> >
> >> > Mike
> >> >
> >> >
> >> > ------------------------------------
> >> >
> >> > Yahoo! Groups Links
> >> >
> >> >
> >> >
> >> >
> >>
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.