Thanks Steve,
I found out that where the manual tells me to remove the six srews
marked "A" there actualy are 7 screws to remove...tricky!
I just looked carefully and tought ...this must be it........
lots of dust and a great mechanism.
-- In Fairlight-CMI@yahoogroups.com, "Steve Rance" <steve@...> wrote:
>
> Check out PDF page number 392 (Section 8.4) of the Series III
service manual
> here.
>
>
>
> http://www.fairlightus.com/Downloads/index.php?dir=Historical%2F
>
>
>
> Complete with a picture showing how to do it!
>
>
>
> There is also a Series II Service manual scanned, unfortunately the
person
> who scanned this manual omitted the very page you need.
>
>
>
> As far as I remember the IIX keyboard and III keyboard are pretty
much
> identical except for the left hand control panel, the I/II/IIX had 3
> sliders, the III have a pitch bend wheel, anyhow so the manual for
the III
> should be good enough.
>
>
>
> [Steve]
>
>
>
> <http://www.fairlightus.com/> SteveRance
>
>
>
> From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-
CMI@yahoogroups.com]
> On Behalf Of dd_62622
> Sent: Saturday, October 18, 2008 07:05
> To: Fairlight-CMI@yahoogroups.com
> Subject: [Fairlight-CMI] cleaning inside music keyboard
>
>
>
> Hi,
>
> Anyone out there with experience in opening up the music keyboard
of a
Show quoted textHide quoted text
> IIx ?
> I tried to lift the top cover yesterday but just didn't dare to put
> more force behind it.
> I followed the route from the service manual but the top would only
> move for about 50 mm or so.
> I remember reading that it was hard to do but it must me possible...
> Any tips or tricks here?
>
> cheers,
> David
>