Synth-DIY Yahoo! Groups Archives

Thread

mfx3 console

2013-02-22 by JAddams

Does anyone have an old mfx3+ console kicking about they want to get rid of?

I don't need the power supply (although that might be handy), and I don't need it functional - just complete.

Jean-Luc

Kryoflux

2013-03-03 by Peter Vogel

Has anyone used Kryoflux to read CMI 8” disks?

http://www.kryoflux.com/

Thanks

Peter

Re: [Fairlight-CMI] Kryoflux

2013-03-03 by Thomas Heckmann

Hi Peter,

not the 8", but as my IIx has the 3,5" Floppies as well I read from them.

Wanted to install a HxC Floppy emulator in one of the 3,5" slots and it's also emulating 2 drives.

But had no time so far to get any further :-)

Best,

Thomas

On Mar 3, 2013, at 11:40 AM, Peter Vogel wrote:

Has anyone used Kryoflux to read CMI 8” disks?

http://www.kryoflux.com/

Thanks

Peter

Thomas Heckmann

troperecordings - afu limited - afulab - trope mastering

RE: [Fairlight-CMI] Kryoflux

2013-03-03 by Peter Vogel

Thomas, once you've read the data, what process do you then use to end up
with a PC-readable file?

Show quoted textHide quoted text

From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CMI@yahoogroups.com]
On Behalf Of Thomas Heckmann
Sent: Monday, 4 March 2013 12:31 AM
To: Fairlight-CMI@yahoogroups.com
Subject: Re: [Fairlight-CMI] Kryoflux

Hi Peter,

not the 8", but as my IIx has the 3,5" Floppies as well I read from them.

Wanted to install a HxC Floppy emulator in one of the 3,5" slots and it's
also emulating 2 drives.

But had no time so far to get any further :-)

Best,

Thomas

On Mar 3, 2013, at 11:40 AM, Peter Vogel wrote:

Has anyone used Kryoflux to read CMI 8" disks?

http://www.kryoflux.com/

Thanks

Peter

Thomas Heckmann

troperecordings - afu limited - afulab - trope mastering

Re: [Fairlight-CMI] Kryoflux

2013-03-04 by Thomas Heckmann

As mentioned I did not go that far yet and as soon as I read the file from the Kryoflux

I will send it to the HxC guys to add it to the emulator.

Hope that works in the end :-)

Might find some time end of the week and will keep you updated.

On Mar 3, 2013, at 7:11 PM, Peter Vogel wrote:

Thomas, once you’ve read the data, what process do you then use to end up with a PC-readable file?

From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CMI@yahoogroups.com] On Behalf Of Thomas Heckmann
Sent: Monday, 4 March 2013 12:31 AM
To: Fairlight-CMI@yahoogroups.com
Subject: Re: [Fairlight-CMI] Kryoflux

Hi Peter,

not the 8", but as my IIx has the 3,5" Floppies as well I read from them.
Wanted to install a HxC Floppy emulator in one of the 3,5" slots and it's also emulating 2 drives.
But had no time so far to get any further :-)
Best,
Thomas

On Mar 3, 2013, at 11:40 AM, Peter Vogel wrote:

Has anyone used Kryoflux to read CMI 8” disks?

http://www.kryoflux.com/

Thanks

Peter

Thomas Heckmann
troperecordings - afu limited - afulab - trope mastering

Thomas Heckmann

troperecordings - afu limited - afulab - trope mastering

Re: Kryoflux

2013-03-31 by kmi9000

Hi,

once you have obtained a demodulated image of the floppy, you can use the "cmios9" tool to access the filesystem (e.g. get/put files, convert samples to WAV).

Hope this is helpful,
Michael


--- In Fairlight-CMI@yahoogroups.com, "Peter Vogel" <peter.vogel@...> wrote:

Show quoted textHide quoted text

>
> Thomas, once you've read the data, what process do you then use to end up
> with a PC-readable file?
> 
>  
> 
> From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CMI@yahoogroups.com]
> On Behalf Of Thomas Heckmann
> Sent: Monday, 4 March 2013 12:31 AM
> To: Fairlight-CMI@yahoogroups.com
> Subject: Re: [Fairlight-CMI] Kryoflux
> 
>  
> 
>   
> 
> Hi Peter,
> 
>  
> 
> not the 8", but as my IIx has the 3,5" Floppies as well I read from them.
> 
> Wanted to install a HxC Floppy emulator in one of the 3,5" slots and it's
> also emulating 2 drives.
> 
> But had no time so far to get any further :-)
> 
> Best,
> 
> Thomas
> 
>  
> 
> On Mar 3, 2013, at 11:40 AM, Peter Vogel wrote:
> 
> 
> 
> 
> 
>  
> 
> Has anyone used Kryoflux to read CMI 8" disks?
> 
>  
> 
> http://www.kryoflux.com/
> 
>  
> 
> Thanks
> 
>  
> 
> Peter
> 
>  
> 
>  
> 
> Thomas Heckmann
> 
> troperecordings - afu limited - afulab - trope mastering
>

Re: Kryoflux

2013-04-22 by Kirk Keyes

Peter - You can use the CMIOS9 software that runs on PCs to get into the disk images. 

Also, in case anyone is interested in disk imaging - I put together an 8" floppy drive and an old PC running WIN98SE/DOS for making disk images. I've written up the process for how I put it together and show it imaging some of the disks, both reading from and writing to the 8" floppy. 

You can find it here:
http://synthroom.com/synths/fairlight-cmi/fairlight-disk-imaging/

Enjoy!
Kirk

--- In Fairlight-CMI@yahoogroups.com, Thomas Heckmann <troperecordings@...> wrote:

Show quoted textHide quoted text

>
> As mentioned I did not go that far yet and as soon as I read the file from the Kryoflux
> I will send it to the HxC guys to add it to the emulator. 
> Hope that works in the end :-)
> 
> Might find some time end of the week and will keep you updated.
> 
> On Mar 3, 2013, at 7:11 PM, Peter Vogel wrote:
> 
> > 
> > 
> > Thomas, once you've read the data, what process do you then use to end up with a PC-readable file?
> >  
> > From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CMI@yahoogroups.com] On Behalf Of Thomas Heckmann
> > Sent: Monday, 4 March 2013 12:31 AM
> > To: Fairlight-CMI@yahoogroups.com
> > Subject: Re: [Fairlight-CMI] Kryoflux
> >  
> >  
> > Hi Peter,
> > 
> >  
> > not the 8", but as my IIx has the 3,5" Floppies as well I read from them.
> > Wanted to install a HxC Floppy emulator in one of the 3,5" slots and it's also emulating 2 drives.
> > But had no time so far to get any further :-)
> > Best,
> > Thomas
> >  
> > On Mar 3, 2013, at 11:40 AM, Peter Vogel wrote:
> > 
> > 
> >  
> > 
> > Has anyone used Kryoflux to read CMI 8" disks?
> >  
> > http://www.kryoflux.com/
> >  
> > Thanks
> >  
> > Peter
> >  
> > 
> >  
> > Thomas Heckmann
> > troperecordings - afu limited - afulab - trope mastering
> >  
> >  
> >  
> > 
> > 
> > 
> 
> Thomas Heckmann
> troperecordings - afu limited - afulab - trope mastering
>

Re: [Fairlight-CMI] Kryoflux

2013-04-22 by JAddams

Hi Kirk,

Do you have any fairlight .IMD files that you are willing to share? I ask because I am testing some software to open them?

J-L

On 22 Apr 2013, at 14:59, Kirk Keyes <Kirk@lotus30.com> wrote:

Peter - You can use the CMIOS9 software that runs on PCs to get into the disk images.

Also, in case anyone is interested in disk imaging - I put together an 8" floppy drive and an old PC running WIN98SE/DOS for making disk images. I've written up the process for how I put it together and show it imaging some of the disks, both reading from and writing to the 8" floppy.

You can find it here:
http://synthroom.com/synths/fairlight-cmi/fairlight-disk-imaging/

Enjoy!
Kirk

--- In Fairlight-CMI@yahoogroups.com, Thomas Heckmann wrote:
>
> As mentioned I did not go that far yet and as soon as I read the file from the Kryoflux
> I will send it to the HxC guys to add it to the emulator.
> Hope that works in the end :-)
>
> Might find some time end of the week and will keep you updated.
>
> On Mar 3, 2013, at 7:11 PM, Peter Vogel wrote:
>
> >
> >
> > Thomas, once you've read the data, what process do you then use to end up with a PC-readable file?
> >
> > From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CMI@yahoogroups.com] On Behalf Of Thomas Heckmann
> > Sent: Monday, 4 March 2013 12:31 AM
> > To: Fairlight-CMI@yahoogroups.com
> > Subject: Re: [Fairlight-CMI] Kryoflux
> >
> >
> > Hi Peter,
> >
> >
> > not the 8", but as my IIx has the 3,5" Floppies as well I read from them.
> > Wanted to install a HxC Floppy emulator in one of the 3,5" slots and it's also emulating 2 drives.
> > But had no time so far to get any further :-)
> > Best,
> > Thomas
> >
> > On Mar 3, 2013, at 11:40 AM, Peter Vogel wrote:
> >
> >
> >
> >
> > Has anyone used Kryoflux to read CMI 8" disks?
> >
> > http://www.kryoflux.com/
> >
> > Thanks
> >
> > Peter
> >
> >
> >
> > Thomas Heckmann
> > troperecordings - afu limited - afulab - trope mastering
> >
> >
> >
> >
> >
> >
>
> Thomas Heckmann
> troperecordings - afu limited - afulab - trope mastering
>

RE: [Fairlight-CMI] Re: Kryoflux

2013-04-23 by Peter Vogel

Great work Kirk! Thank you for documenting it so clearly.

 

Best wishes,

 

Peter

 

From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CMI@yahoogroups.com]
On Behalf Of Kirk Keyes
Sent: Monday, 22 April 2013 11:59 PM
To: Fairlight-CMI@yahoogroups.com
Subject: [Fairlight-CMI] Re: Kryoflux

 

  

Peter - You can use the CMIOS9 software that runs on PCs to get into the
disk images. 

Also, in case anyone is interested in disk imaging - I put together an 8"
floppy drive and an old PC running WIN98SE/DOS for making disk images. I've
written up the process for how I put it together and show it imaging some of
the disks, both reading from and writing to the 8" floppy. 

You can find it here:
http://synthroom.com/synths/fairlight-cmi/fairlight-disk-imaging/

Enjoy!
Kirk

--- In Fairlight-CMI@yahoogroups.com
<mailto:Fairlight-CMI%40yahoogroups.com> , Thomas Heckmann
<troperecordings@...> wrote:
>
> As mentioned I did not go that far yet and as soon as I read the file from
the Kryoflux
> I will send it to the HxC guys to add it to the emulator. 
> Hope that works in the end :-)
> 
> Might find some time end of the week and will keep you updated.
> 
> On Mar 3, 2013, at 7:11 PM, Peter Vogel wrote:
> 
> > 
> > 
> > Thomas, once you've read the data, what process do you then use to end
up with a PC-readable file?
> > 
> > From: Fairlight-CMI@yahoogroups.com
<mailto:Fairlight-CMI%40yahoogroups.com>
[mailto:Fairlight-CMI@yahoogroups.com
<mailto:Fairlight-CMI%40yahoogroups.com> ] On Behalf Of Thomas Heckmann
> > Sent: Monday, 4 March 2013 12:31 AM
> > To: Fairlight-CMI@yahoogroups.com
<mailto:Fairlight-CMI%40yahoogroups.com> 
> > Subject: Re: [Fairlight-CMI] Kryoflux
> > 
> > 
> > Hi Peter,
> > 
> > 
> > not the 8", but as my IIx has the 3,5" Floppies as well I read from
them.
> > Wanted to install a HxC Floppy emulator in one of the 3,5" slots and
it's also emulating 2 drives.

Show quoted textHide quoted text

> > But had no time so far to get any further :-)
> > Best,
> > Thomas
> > 
> > On Mar 3, 2013, at 11:40 AM, Peter Vogel wrote:
> > 
> > 
> > 
> > 
> > Has anyone used Kryoflux to read CMI 8" disks?
> > 
> > http://www.kryoflux.com/
> > 
> > Thanks
> > 
> > Peter
> > 
> > 
> > 
> > Thomas Heckmann
> > troperecordings - afu limited - afulab - trope mastering
> > 
> > 
> > 
> > 
> > 
> > 
> 
> Thomas Heckmann
> troperecordings - afu limited - afulab - trope mastering
>

Re: [Fairlight-CMI] Re: Kryoflux

2013-04-23 by Jean-Bernard EMOND

Look in the past of this groups.

For recall.

In this group we (Joe Britt, Klaus Michael Indlekofer, Joerg M. Sigle 
and me) are already talked about the making of disk images for Fairlight 
... and also full of something (serial, floppy, etc) ;)

Simply search, a few years ago ;)

Regards,

JB

Le 22/04/2013 15:59, Kirk Keyes a écrit :

Show quoted textHide quoted text

> Peter - You can use the CMIOS9 software that runs on PCs to get into the
> disk images.
>
> Also, in case anyone is interested in disk imaging - I put together an
> 8" floppy drive and an old PC running WIN98SE/DOS for making disk
> images. I've written up the process for how I put it together and show
> it imaging some of the disks, both reading from and writing to the 8"
> floppy.
>
> You can find it here:
> http://synthroom.com/synths/fairlight-cmi/fairlight-disk-imaging/
>
> Enjoy!
> Kirk
>
> --- In Fairlight-CMI@yahoogroups.com
> <mailto:Fairlight-CMI%40yahoogroups.com>, Thomas Heckmann
> <troperecordings@...> wrote:
>  >
>  > As mentioned I did not go that far yet and as soon as I read the file
> from the Kryoflux
>  > I will send it to the HxC guys to add it to the emulator.
>  > Hope that works in the end :-)
>  >
>  > Might find some time end of the week and will keep you updated.
>  >
>  > On Mar 3, 2013, at 7:11 PM, Peter Vogel wrote:
>  >
>  > >
>  > >
>  > > Thomas, once you've read the data, what process do you then use to
> end up with a PC-readable file?
>  > >
>  > > From: Fairlight-CMI@yahoogroups.com
> <mailto:Fairlight-CMI%40yahoogroups.com>
> [mailto:Fairlight-CMI@yahoogroups.com
> <mailto:Fairlight-CMI%40yahoogroups.com>] On Behalf Of Thomas Heckmann
>  > > Sent: Monday, 4 March 2013 12:31 AM
>  > > To: Fairlight-CMI@yahoogroups.com
> <mailto:Fairlight-CMI%40yahoogroups.com>
>  > > Subject: Re: [Fairlight-CMI] Kryoflux
>  > >
>  > >
>  > > Hi Peter,
>  > >
>  > >
>  > > not the 8", but as my IIx has the 3,5" Floppies as well I read from
> them.
>  > > Wanted to install a HxC Floppy emulator in one of the 3,5" slots
> and it's also emulating 2 drives.
>  > > But had no time so far to get any further :-)
>  > > Best,
>  > > Thomas
>  > >
>  > > On Mar 3, 2013, at 11:40 AM, Peter Vogel wrote:
>  > >
>  > >
>  > >
>  > >
>  > > Has anyone used Kryoflux to read CMI 8" disks?
>  > >
>  > > http://www.kryoflux.com/
>  > >
>  > > Thanks
>  > >
>  > > Peter
>  > >
>  > >
>  > >
>  > > Thomas Heckmann
>  > > troperecordings - afu limited - afulab - trope mastering
>  > >
>  > >
>  > >
>  > >
>  > >
>  > >
>  >
>  > Thomas Heckmann
>  > troperecordings - afu limited - afulab - trope mastering
>  >
>
>

Re: [Fairlight-CMI] Re: Kryoflux

2013-04-23 by Jean-Bernard EMOND

Nice blog ;)

Le 22/04/2013 15:59, Kirk Keyes a écrit :

Show quoted textHide quoted text

> Peter - You can use the CMIOS9 software that runs on PCs to get into the
> disk images.
>
> Also, in case anyone is interested in disk imaging - I put together an
> 8" floppy drive and an old PC running WIN98SE/DOS for making disk
> images. I've written up the process for how I put it together and show
> it imaging some of the disks, both reading from and writing to the 8"
> floppy.
>
> You can find it here:
> http://synthroom.com/synths/fairlight-cmi/fairlight-disk-imaging/
>
> Enjoy!
> Kirk
>
> --- In Fairlight-CMI@yahoogroups.com
> <mailto:Fairlight-CMI%40yahoogroups.com>, Thomas Heckmann
> <troperecordings@...> wrote:
>  >
>  > As mentioned I did not go that far yet and as soon as I read the file
> from the Kryoflux
>  > I will send it to the HxC guys to add it to the emulator.
>  > Hope that works in the end :-)
>  >
>  > Might find some time end of the week and will keep you updated.
>  >
>  > On Mar 3, 2013, at 7:11 PM, Peter Vogel wrote:
>  >
>  > >
>  > >
>  > > Thomas, once you've read the data, what process do you then use to
> end up with a PC-readable file?
>  > >
>  > > From: Fairlight-CMI@yahoogroups.com
> <mailto:Fairlight-CMI%40yahoogroups.com>
> [mailto:Fairlight-CMI@yahoogroups.com
> <mailto:Fairlight-CMI%40yahoogroups.com>] On Behalf Of Thomas Heckmann
>  > > Sent: Monday, 4 March 2013 12:31 AM
>  > > To: Fairlight-CMI@yahoogroups.com
> <mailto:Fairlight-CMI%40yahoogroups.com>
>  > > Subject: Re: [Fairlight-CMI] Kryoflux
>  > >
>  > >
>  > > Hi Peter,
>  > >
>  > >
>  > > not the 8", but as my IIx has the 3,5" Floppies as well I read from
> them.
>  > > Wanted to install a HxC Floppy emulator in one of the 3,5" slots
> and it's also emulating 2 drives.
>  > > But had no time so far to get any further :-)
>  > > Best,
>  > > Thomas
>  > >
>  > > On Mar 3, 2013, at 11:40 AM, Peter Vogel wrote:
>  > >
>  > >
>  > >
>  > >
>  > > Has anyone used Kryoflux to read CMI 8" disks?
>  > >
>  > > http://www.kryoflux.com/
>  > >
>  > > Thanks
>  > >
>  > > Peter
>  > >
>  > >
>  > >
>  > > Thomas Heckmann
>  > > troperecordings - afu limited - afulab - trope mastering
>  > >
>  > >
>  > >
>  > >
>  > >
>  > >
>  >
>  > Thomas Heckmann
>  > troperecordings - afu limited - afulab - trope mastering
>  >
>
>

Re: Kryoflux

2013-04-23 by Kirk Keyes

Thanks, Peter!

J-L - I should have some soon. 

In the mean time, check out the Fairlight USA site as they have a lot of disk images there:
http://cmi.fairlightus.com/

Follow the link for Jeff's disks and then make sure you navigate around in the directory tree as there are a lot of images there in other directories. 

Kirk



--- In Fairlight-CMI@yahoogroups.com, "Peter Vogel" <peter.vogel@...> wrote:

Show quoted textHide quoted text

>
> Great work Kirk! Thank you for documenting it so clearly.
> 
>  
> 
> Best wishes,
> 
>  
> 
> Peter
> 
>  
> 
> From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CMI@yahoogroups.com]
> On Behalf Of Kirk Keyes
> Sent: Monday, 22 April 2013 11:59 PM
> To: Fairlight-CMI@yahoogroups.com
> Subject: [Fairlight-CMI] Re: Kryoflux
> 
>  
> 
>   
> 
> Peter - You can use the CMIOS9 software that runs on PCs to get into the
> disk images. 
> 
> Also, in case anyone is interested in disk imaging - I put together an 8"
> floppy drive and an old PC running WIN98SE/DOS for making disk images. I've
> written up the process for how I put it together and show it imaging some of
> the disks, both reading from and writing to the 8" floppy. 
> 
> You can find it here:
> http://synthroom.com/synths/fairlight-cmi/fairlight-disk-imaging/
> 
> Enjoy!
> Kirk
> 
> --- In Fairlight-CMI@yahoogroups.com
> <mailto:Fairlight-CMI%40yahoogroups.com> , Thomas Heckmann
> <troperecordings@> wrote:
> >
> > As mentioned I did not go that far yet and as soon as I read the file from
> the Kryoflux
> > I will send it to the HxC guys to add it to the emulator. 
> > Hope that works in the end :-)
> > 
> > Might find some time end of the week and will keep you updated.
> > 
> > On Mar 3, 2013, at 7:11 PM, Peter Vogel wrote:
> > 
> > > 
> > > 
> > > Thomas, once you've read the data, what process do you then use to end
> up with a PC-readable file?
> > > 
> > > From: Fairlight-CMI@yahoogroups.com
> <mailto:Fairlight-CMI%40yahoogroups.com>
> [mailto:Fairlight-CMI@yahoogroups.com
> <mailto:Fairlight-CMI%40yahoogroups.com> ] On Behalf Of Thomas Heckmann
> > > Sent: Monday, 4 March 2013 12:31 AM
> > > To: Fairlight-CMI@yahoogroups.com
> <mailto:Fairlight-CMI%40yahoogroups.com> 
> > > Subject: Re: [Fairlight-CMI] Kryoflux
> > > 
> > > 
> > > Hi Peter,
> > > 
> > > 
> > > not the 8", but as my IIx has the 3,5" Floppies as well I read from
> them.
> > > Wanted to install a HxC Floppy emulator in one of the 3,5" slots and
> it's also emulating 2 drives.
> > > But had no time so far to get any further :-)
> > > Best,
> > > Thomas
> > > 
> > > On Mar 3, 2013, at 11:40 AM, Peter Vogel wrote:
> > > 
> > > 
> > > 
> > > 
> > > Has anyone used Kryoflux to read CMI 8" disks?
> > > 
> > > http://www.kryoflux.com/
> > > 
> > > Thanks
> > > 
> > > Peter
> > > 
> > > 
> > > 
> > > Thomas Heckmann
> > > troperecordings - afu limited - afulab - trope mastering
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > 
> > Thomas Heckmann
> > troperecordings - afu limited - afulab - trope mastering
> >
>

Re: Kryoflux

2013-05-24 by Kirk Keyes

HI - I moved stuff around on my site and the imaging page I listed earlier has moved to this address:
http://synthroom.com/fairlight-cmi/fairlight-disk-imaging/

Kirk

--- In Fairlight-CMI@yahoogroups.com, "Kirk Keyes" <Kirk@...> wrote:

Show quoted textHide quoted text

>
> Peter - You can use the CMIOS9 software that runs on PCs to get into the disk images. 
> 
> Also, in case anyone is interested in disk imaging - I put together an 8" floppy drive and an old PC running WIN98SE/DOS for making disk images. I've written up the process for how I put it together and show it imaging some of the disks, both reading from and writing to the 8" floppy. 
> 
> You can find it here:
> http://synthroom.com/synths/fairlight-cmi/fairlight-disk-imaging/
> 
> Enjoy!
> Kirk
> 
> --- In Fairlight-CMI@yahoogroups.com, Thomas Heckmann <troperecordings@> wrote:
> >
> > As mentioned I did not go that far yet and as soon as I read the file from the Kryoflux
> > I will send it to the HxC guys to add it to the emulator. 
> > Hope that works in the end :-)
> > 
> > Might find some time end of the week and will keep you updated.
> > 
> > On Mar 3, 2013, at 7:11 PM, Peter Vogel wrote:
> > 
> > > 
> > > 
> > > Thomas, once you've read the data, what process do you then use to end up with a PC-readable file?
> > >  
> > > From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CMI@yahoogroups.com] On Behalf Of Thomas Heckmann
> > > Sent: Monday, 4 March 2013 12:31 AM
> > > To: Fairlight-CMI@yahoogroups.com
> > > Subject: Re: [Fairlight-CMI] Kryoflux
> > >  
> > >  
> > > Hi Peter,
> > > 
> > >  
> > > not the 8", but as my IIx has the 3,5" Floppies as well I read from them.
> > > Wanted to install a HxC Floppy emulator in one of the 3,5" slots and it's also emulating 2 drives.
> > > But had no time so far to get any further :-)
> > > Best,
> > > Thomas
> > >  
> > > On Mar 3, 2013, at 11:40 AM, Peter Vogel wrote:
> > > 
> > > 
> > >  
> > > 
> > > Has anyone used Kryoflux to read CMI 8" disks?
> > >  
> > > http://www.kryoflux.com/
> > >  
> > > Thanks
> > >  
> > > Peter
> > >  
> > > 
> > >  
> > > Thomas Heckmann
> > > troperecordings - afu limited - afulab - trope mastering
> > >  
> > >  
> > >  
> > > 
> > > 
> > > 
> > 
> > Thomas Heckmann
> > troperecordings - afu limited - afulab - trope mastering
> >
>